MSCD104

MSCD102 THRU MSCD106 SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Reverse Voltage - 20 to 60 Volts Forward Current - 1.0 Ampere D ED ATENT E ATENT P P 0805 0.002(0.05) 0.083(2.10) 0.075(1.90) FEATURES * * * * 75) 0.055(1.40) 0.047(1.20) 0.039(1.00) R 0. 011 ( 0.2 0.024(0.60) 0.016(0.40) 0.024(0.60) 0.016(0.40) * * * * * * * * Lead free product Leadless chip form , no lead damage Lead-free solder joint , no wire bond & lead frame Plastic package has Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications Low profile package Built-in strain relief Metal to silicon rectifier , majority carrier conduction Low power loss , High efficiency High current capability , low VF High surge capacity For using in low voltage high frequency switching power supply, inverters , free wheeling , and polarity protection applications 0.039(1.00) 0.028(0.70) MECHANICAL DATA Case : Packed with FRP substrate and epoxy underfilled Terminals : Pure Tin plated (Lead-Free), solderable per MIL-STD-750, Method 2026. Polarity : Cathode Band, Laser marking Weight : 0.005 gram Marking : MSCD102 = A2 MSCD104 = A4 MSCD106 = A6 *Dimensions in inches and (millimeters) TM MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current (SEE FIG.1) SYMBOLS VRRM VRMS VDC IO MSCD102 20 14 20 MSCD104 40 28 40 1.0 MSCD106 60 42 60 UNITS Volts Volts Volts Amps o Peak forward surge current 8.3ms single half sine-wave IFSM superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 1.0 A (NOTE 1) Maximum DC reverse current at rated DC blocking voltage Typical thermal resistance (NOTE 2) R Operating junction temperature range Storage temperature range NOTES : (1) Pulse test width PW=300usec , 1% duty cycle. (2) Mounted on P.C. board with 0.2 x 0.2"(5.0 x5.0mm) copper pad areas. JL 10 Amps VF 0.45 0.50 0.2 0.65 Volts (NOTE 1) @TJ=25 C @TJ=100 C R JA o o IR 10 88 28 -55 to +125 -55 to +150 -55 to +150 o mA C/W o o TJ TSTG C C REV. 1 Zowie Technology Corporation RATINGS AND CHARACTERISTIC CURVES MSCD102 THRU MSCD106 FIG.1 - FORWARD CURRENT DERATING CURVE 1.0 12 FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 8.3ms Single Half Sine-Wave (JEDEC Method) AVERAGE FORWARD RECTIFIED CURRENT, AMPERES PEAK FORWARD SURGE CURRENT, AMPERES RESISTIVE OR INDUCTIVE LOAD P.C.B. MOUNTED ON 0.2X0.2"(5.0X5.0mm) COPPER PAD AREAS MSCD102 & MSCD104 MSCD106 10 8 0.5 6 4 2 0 0 25 50 75 100 125 o 0 150 175 1 10 NUMBER OF CYCLES AT 60Hz 100 LEAD TEMPERATURE, C FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 100 FIG.4 - TYPICAL REVERSE CHARACTERISTICS IINSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, MILLIAMPERES 10 TJ=100 C o 1.00 1.0 0.10 0.10 0.01 Ta=25 C o 0.01 TJ=25 C o .001 0 0.1 0.2 0.3 0.4 0.5 0.6 MSCD102 MSCD104 MSCD106 .001 0.7 0.8 0 20 40 60 80 100 FORWARD VOLTAGE, (V) PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE 400 TJ=25 C f=1.0MHz Vsig=50mVP-P o JUNCTION CAPACITANCE, pF 100 10 .1 1.0 10 100 REVERSE VOLTAGE, VOLTS REV. 1 Zowie Technology Corporation