RGF30KA

RGF30A THRU RGF30M SURFACE MOUNT GLASS PASSIVATED JUNCTION FAST RECOVERY RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 3.0 Amperes D TENTE PA 0.150(3.80) 0.130(3.30) DO-214AA FEATURES 0.083(2.12) 0.077(1.95) 0.187(4.75) 0.167(4.24) * * * * * * * 0.016(0.40) 0.006(0.15) 0.102(2.60) 0.079(2.00) 0.050(1.27) 0.030(0.76) 0.236(6.00) 0.197(5.00) GPRC (Glass Passivated Rectifier Chip) inside Glass passivated cavity-free junction Ideal for surface mount automotive applications Fast switching for high efficiency Built-in strain relief Easy pick and place o High temperature soldering guaranteed: 260 C/10 seconds, at terminals * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 MECHANICAL DATA Case : JEDEC DO-214AA molded plastic over passivated chip Terminals : Solder plated , solderable per MIL-STD-750, Method 2026 Polarity : Color band denotes cathode end Mounting Position : Any Weight : 0.004 ounes , 0.12 gram *Dimensions in inches and (millimeters) TM MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature SYMBOLS unless otherwise specified. Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TA=75 C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 3.0 A Maximum full load reverse current, full cycle o average , 0.375" (9.5mm) lead lengths at TA=55 C Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range TA=25 C o TA=125 C o TA=150 C o o o RGF30 A B 100 70 100 UNITS K 800 560 800 D 200 140 200 G 400 280 400 J 600 420 600 JA 600 420 600 KA 800 560 800 M 1000 700 1000 MA 1000 700 1000 VRRM VRMS VDC I (AV) 50 35 50 Volts Volts Volts Amps 3.0 IFSM VF IR (AV) 115 1.3 100 5 50 120 150 250 60 15 50 -65 to +175 150 500 300 500 300 Amps Volts uA IR trr CJ R R JA JL uA nS pF o C/W o TJ,TSTG C NOTES : (1) Reverse recovery test condition : IF 0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient and from junction to lead P.C.B. mounted on 0.2 x 0.2" (5.0 x 5.0mm) copper pad areas. REV. : 0 Zowie Technology Corporation RATINGS AND CHARACTERISTIC CURVES RGF30A THRU RGF30M FIG.1 - FORWARD CURRENT DERATING CURVE 3.0 AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 2.5 2.0 1.5 1.0 0.5 0 0 25 50 75 100 125 o FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 200 PEAK FORWARD SURGE CURRENT, AMPERES 60Hz RESISTIVE OR INDUCTIVE LOAD TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 100 60 40 20 0 1 10 NUMBER OF CYCLES AT 60Hz 100 150 175 AMBIENT TEMPERATURE, C FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10.00 IINSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES 100 FIG.4 - TYPICAL REVERSE CHARACTERISTICS PULSE WIDTH=300uS 1% DUTY CYCLE 1.00 10 1 0.10 TJ=125 C TJ=150 C o o 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 0 20 40 60 80 100 110 PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE 200 JUNCTION CAPACITANCE, pF TJ = 2 5 C o 100 60 40 20 10 6 4 2 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, VOLTS REV. : 0 Zowie Technology Corporation