UGP10B

UGP10A THRU UGP10K SINTERED GLASS PASSIVATED JUNCTION ULTRAFAST EFFICIENT RECTIFIER Reverse Voltage - 50 to 800 Volts Forward Current - 1.0 Ampere D TENTE PA DO-204AL FEATURES 1.0(25.4) MIN. 0.107(2.7) 0.080(2.0) DIA. * * * * * * * 1.0(25.4) MIN. GPRC (Glass Passivated Rectifier Chip) inside Glass passivated cavity-free junction Ultrafast recovery time for high efficiency Low forward voltage , high current capability Low leakage current High surge current capability o High temperature soldering guaranteed: 260 C/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 0.205(5.2) 0.160(4.1) 0.034(0.86) 0.028(0.71) DIA. MECHANICAL DATA Case : JEDEC DO-204AL molded plastic over glass body Terminals : Plated axial leads , solderable per MIL-STD-750, Method 2026 Polarity : Color band denotes cathode end Mounting Position : Any Weight : 0.012 ounes , 0.3 gram *Dimensions in inches and (millimeters) TM MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature SYMBOLS unless otherwise specified. Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current I (AV) 0.375" (9.5mm) lead length (SEE FIG.1) Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 1.0 A Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range TA=25 C TA=125 C o o o UGP10 A B 100 70 100 D 200 140 200 UNITS G 400 280 400 F 300 210 300 J 600 420 600 K 800 560 800 VRRM VRMS VDC 50 35 50 Volts Volts Volts Amps 1.0 IFSM 30 25 Amps VF 0.95 5 1.25 1.7 2.2 Volts IR 50 35 17 50 -55 to +150 o uA trr CJ R JA nS pF C/W o TJ,TSTG C NOTES : (1) Reverse recovery test condition : IF 0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead lengths, P.C.B. mounted. REV. : 0 Zowie Technology Corporation RATINGS AND CHARACTERISTIC CURVES UGP10A THRU UGP10K FIG.1 - FORWARD CURRENT DERATING CURVE 1.0 AVERAGE FORWARD RECTIFIED CURRENT, AMPERES RESISTIVE OR INDUCTIVE LOAD FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 30 PEAK FORWARD SURGE CURRENT, AMPERES 25 20 UGP10A~UGP10G TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 0.5 15 UGP10J~UGP10K 10 5 0 0.375" (9.5mm) LEAD LENGTH 0 0 25 50 75 100 125 o 150 175 1 10 NUMBER OF CYCLES AT 60Hz 100 AMBIENT TEMPERATURE, C FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10.00 IINSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES PULSE WIDTH=300uS 1% DUTY CYCLE FIG.4 - TYPICAL REVERSE CHARACTERISTICS 100 ~UG P10 G UG P1 0J UG P1 0K P10D 10 UGP 10 A~UG 1.00 UG P10 F 0.10 1 TJ=100 C TJ=125 C o o 0.1 0.01 0.2 0 0.6 1.0 1.4 1.8 2.2 20 40 60 80 100 110 PERCENT OF RATED PEAK REVERSE VOLTAGE,% INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5 - TYPICAL JUNCTION CAPACITANCE 200 JUNCTION CAPACITANCE, pF TJ = 25 C o 100 60 40 20 10 6 4 2 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, VOLTS REV. : 0 Zowie Technology Corporation