4N38

PHOTOTRANSISTOR Industry Standard Single Channel 6 Pin DIP Optocoupler DEVICE TYPES Part No. CTR % Min. 4N25 20 4N26 20 4N27 10 4N28 10 4N35 100 4N36 100 4N37 100 4N38 10 H11A1 50 H11A2 20 H11A3 20 H11A4 10 H11A5 30 Dimensions in Inches (mm) Part No. MCT2 MCT2E MCT270 MCT271 MCT272 MCT273 MCT274 MCT275 MCT276 MCT277 CTR % Min. 20 20 50 45–90 75–150 125–250 225–400 70–90 15–60 100 3 .248 (6.30) .256 (6.50) 4 2 1 pin one ID Anode 1 Cathode 2 5 6 6 Base 5 Collector 4 Emitter NC 3 .335 (8.50) .343 (8.70) .039 (1.00) Min. 4° typ. .018 (0.45) .022 (0.55) .048 (0.45) .022 (0.55) .130 (3.30) .150 (3.81) 18° .031 (0.80) min. .031 (0.80) .035 (0.90) .100 (2.54) typ. 3°–9° .010 (.25) typ. .300–.347 (7.62–8.81) .114 (2.90) .130 (3.0) .300 (7.62) typ. FEATURES • Interfaces with Common Logic Families • Input-output Coupling Capacitance < 0.5 pF • Industry Standard Dual-in-line 6-pin Package • Field Effect Stable by TRIOS® • 5300 VRMS Isolation Test Voltage • Underwriters Laboratory File #E52744 • V VDE #0884 Approval Available with Option 1 DE DESCRIPTION This data sheet presents five families of Infineon Industry Standard Single Channel Phototransistor Couplers. These families include the 4N25/26/27/28 types, the 4N35/36/37/38 couplers, the H11A1/A2/ A3/A4/A5, the MCT2/2E, and MCT270/271/272/273/274/275/276/ 277 devices.Each optocoupler consists of Gallium Arsenide infrared LED and a silicon NPN phototransistor. These couplers are Underwriters Laboratories (UL) listed to comply with a 5300 VRMS Isolation Test Voltage. This isolation performance is accomplished through Infineon double molding isolation manufacturing process. Compliance to VDE 0884 partial discharge isolation specification is available for these families by ordering option 1. Phototransistor gain stability, in the presence of high isolation voltages, is insured by incorporating a TRansparent lOn Shield (TRIOS)® on the phototransistor substrate. These isolation processes and the Infineon IS09001 Quality program results in the highest isolation performance available for a commercial plastic phototransistor optocoupler. The devices are available in lead formed configuration suitable for surface mounting and are available either on tape and reel, or in standard tube shipping containers. APPLICATIONS • AC Mains Detection • Reed Relay Driving • Switch Mode Power Supply Feedback • Telephone Ring Detection • Logic Ground Isolation • Logic Coupling with High Frequency Noise Rejection Notes: Designing with data sheet is covered in Application Note 45.  2001 Infineon Technologies Corp. • Optoelectronics Division • San Jose, CA www.infineon.com/opto • 1-888-Infineon (1-888-463-4636) 2–53 March 27, 2000-00 Maximum Ratings TA=25°C Emitter Reverse Voltage .......................................................................................... 6.0 V Forward Current ........................................................................................ 60 mA Surge Current (t≤10 µs)............................................................................... 2.5 A Power Dissipation................................................................................... 100 mW Detector Collector-Emitter Breakdown Voltage........................................................... 70 V Emitter-Base Breakdown Voltage ................................................................ 7.0 V Collector Current ....................................................................................... 50 mA Collector Current(t