5.0SMDJ24CA

Transient Voltage Suppressors (TVS) 5.0SMDJ Series Description The 5.0SMDJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features l Very fast response time l Matte tin lead–free Plated l Halogen free and RoHS compliant l Low incremental surge resistance Electrical symbol l Typical IR less than 5μA above 19V l Compatible with industrial standard package DO DO-214AB l For surface mounted applications to optimize board space BI l 5000W peak pulse power capability with at 10/1000μs Cathode waveform,repetition rate (duty cycle): 0.01% Anode l High temperature soldering:260°C/ 10 0 seconds at terminals UNI Part Number Code 5 . 0 S M D J Series code x x x C Reverse Stand-Off Voltage A 5% Voltage Tolerance Blank:Uni-Directional Directional C:Bi-Directional Directional Mechanical Characteristics Rating Symbol Value Units Peak Pulse Power Dissipation at TA=25ºC by 10/1000μs Waveform (Fig.2)(Note 1), (Note 2) PPP 5000 W Power Dissipation on Infinite Heat Sink at TL=75°C(Fig.6) PD 6.5 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) IFSM 300 A TJ -55 to 150 °C TSTG -55 to 150 °C Operating Temperature Range Storage Temperature Range 1. Non-repetitive repetitive current pulse , per Fig. 4 and derated above TA = 25°C per Fig. 3. 2. Mounted on copper pad area of 0.31x0.31” (8.0 × 8.0mm) to each terminal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only,duty cycle=4 per minute m maximum. Specifications are subject to change without notice. Please refer to http://www.ruilon.com.cn for current information. Revised: 2018-06-22 Page:1 Transient Voltage Suppressors (TVS) 5.0SMDJ Series Electrical Characteristics Type Number Reverse Stand-Off Voltage Marking VR Breakdown Voltage VBR @IT Min Max Max. Max. Test Reverse Clamping Peak Pulse Current Leakage Voltage Current IT VC@IPP IPP IR@VR UNI BI UNI BI V V V mA V A µA 5.0SMDJ11A 5.0SMDJ11CA 5PDX 5BDX 11.0 12.20 13.50 10 18.2 274.73 800 5.0SMDJ12A 5.0SMDJ12CA 5PDZ 5BDZ 12.0 13.30 14.70 10 19.9 251.26 800 5.0SMDJ13A 5.0SMDJ13CA 5PEE 5BEE 13.0 14.40 15.90 10 21.5 232.56 500 5.0SMDJ14A 5.0SMDJ14CA 5PEG 5BEG 14.0 15.60 17.20 10 23.2 215.52 200 5.0SMDJ15A 5.0SMDJ15CA 5PEK 5BEK 15.0 16.70 18.50 1 24.4 204.92 100 5.0SMDJ16A 5.0SMDJ16CA 5PEM 5BEM 16.0 17.80 19.70 1 26.0 192.31 50 5.0SMDJ17A 5.0SMDJ17CA 5PEP 5BEP 17.0 18.90 20.90 1 27.6 181.16 20 5.0SMDJ18A 5.0SMDJ18CA 5PER 5BER 18.0 20.00 22.10 1 29.2 171.23 10 5.0SMDJ19A 5.0SMDJ19CA 5PET 5BET 19.0 21.10 23.30 1 30.8 162.44 10 5.0SMDJ20A 5.0SMDJ20CA 5PEV 5BEV 20.0 22.20 24.50 1 32.4 154.32 5 5.0SMDJ22A 5.0SMDJ22CA 5PEX 5BEX 22.0 24.40 26.90 1 35.5 140.85 5 5.0SMDJ24A 5.0SMDJ24CA 5PEZ 5BEZ 24.0 26.70 29.50 1 38.9 128.53 5 5.0SMDJ26A 5.0SMDJ26CA 5PFE 5BFE 26.0 28.90 31.90 1 42.1 118.76 5 5.0SMDJ28A 5.0SMDJ28CA 5PFG 5BFG 28.0 31.10 34.40 1 45.4 110.13 5 5.0SMDJ30A 5.0SMDJ30CA 5PFK 5BFK 30.0 33.30 36.80 1 48.4 103.31 5 5.0SMDJ33A 5.0SMDJ33CA 5PFM 5BFM 33.0 36.70 40.60 1 53.3 93.81 5 5.0SMDJ36A 5.0SMDJ36CA 5PFP 5BFP 36.0 40.00 44.20 1 58.1 86.06 5 5.0SMDJ40A 5.0SMDJ40CA 5PFR 5BFR 40.0 44.40 49.10 1 64.5 77.52 5 5.0SMDJ43A 5.0SMDJ43CA 5PFT 5BFT 43.0 47.80 52.80 1 69.4 72.05 5 5.0SMDJ45A 5.0SMDJ45CA 5PFV 5BFV 45.0 50.00 55.30 1 72.7 68.78 5 5.0SMDJ48A 5.0SMDJ48CA 5PFX 5BFX 48.0 53.30 58.90 1 77.4 64.60 5 5.0SMDJ51A 5.0SMDJ51CA 5PFZ 5BFZ 51.0 56.70 62.70 1 82.4 60.68 5 5.0SMDJ54A 5.0SMDJ54CA 5PGE 5BGE 54.0 60.00 66.30 1 87.1 57.41 5 5.0SMDJ58A 5.0SMDJ58CA 5PGG 5BGG 58.0 64.40 71.20 1 93.6 53.42 5 5.0SMDJ60A 5.0SMDJ60CA 5PGK 5BGK 60.0 66.70 73.70 1 96.8 51.65 5 5.0SMDJ64A 5.0SMDJ64CA 5PGM 5BGM 64.0 71.10 78.60 1 103.0 48.54 5 5.0SMDJ70A 5.0SMDJ70CA 5PGP 5BGP 70.0 77.80 86.00 1 113.0 44.25 5 5.0SMDJ75A 5.0SMDJ75CA 5PGR 5BGR 75.0 83.30 92.10 1 121.0 41.32 5 5.0SMDJ78A 5.0SMDJ78CA 5PGT 5BGT 78.0 86.70 95.80 1 126.0 39.68 5 5.0SMDJ80A 5.0SMDJ80CA 5PGB 5BGB 80.0 88.80 97.60 1 129.6 38.58 5 5.0SMDJ85A 5.0SMDJ85CA 5PGV 5BGV 85.0 94.40 104.00 1 137.0 36.50 5 5.0SMDJ90A 5.0SMDJ90CA 5PGX 5BGX 90.0 100.00 111.00 1 146.0 34.25 5 5.0SMDJ100A 5.0SMDJ100CA 5PGZ 5BGZ 100.0 111.00 123.00 1 162.0 30.86 5 5.0SMDJ110A 5.0SMDJ110CA 5PHE 5BHE 110.0 122.00 135.00 1 177.0 28.25 5 5.0SMDJ120A 5.0SMDJ120CA 5PHG 5BHG 120.0 133.00 147.00 1 193.0 25.91 5 5.0SMDJ130A 5.0SMDJ130CA 5PHK 5BHK 130.0 144.00 159.00 1 209.0 23.92 5 Specifications are subject to change without notice. Please refer to http://www.ruilon.com.cn for current information. Revised: 2018-06-22 Page:2 Transient Voltage Suppressors (TVS) 5.0SMDJ Series Electrical Characteristics Type Number Reverse Stand-Off Voltage Marking VR Breakdown Voltage Max. Max. Test Reverse Clamping Peak Pulse Current Leakage Voltage Current VBR @IT Min Max IT VC@IPP IPP IR@VR UNI BI UNI BI V V V mA V A µA 5.0SMDJ140A 5.0SMDJ140CA 5PHB 5BHB 140.00 155.00 171.00 1 226.8 22.05 5 5.0SMDJ150A 5.0SMDJ150CA 5PHM 5BHM 150.00 167.00 185.00 1 243.0 20.58 5 5.0SMDJ160A 5.0SMDJ160CA 5PHP 5BHP 160.00 178.00 197.00 1 259.0 19.31 5 5.0SMDJ170A 5.0SMDJ170CA 5PHR 5BHR 170.00 189.00 209.00 1 275.0 18.18 5 5.0SMDJ180A 5.0SMDJ180CA 5PHT 5BHT 180.00 200.00 220.00 1 291.6 17.15 5 5.0SMDJ190A 5.0SMDJ190CA 5PHV 5BHV 190.00 211.00 232.00 1 307.8 16.24 5 5.0SMDJ200A 5.0SMDJ200CA 5PHW 5BHW 200.00 224.00 247.00 1 324.0 15.43 5 5.0SMDJ220A 5.0SMDJ220CA 5PHX 5BHX 220.00 246.00 272.00 1 356.0 14.04 5 5.0SMDJ250A 5.0SMDJ250CA 5PHZ 5BHZ 250.00 279.00 309.00 1 405.0 12.35 5 5.0SMDJ300A 5.0SMDJ300CA 5PJE 5BJE 300.00 335.00 371.00 1 486.0 10.29 5 5.0SMDJ350A 5.0SMDJ350CA 5PJG 5BJG 350.00 391.00 432.00 1 567.0 8.82 5 5.0SMDJ400A 5.0SMDJ400CA 5PJK 5BJK 400.00 447.00 494.00 1 648.0 7.72 5 5.0SMDJ440A 5.0SMDJ440CA 5PJM 5BJM 440.00 492.00 543.00 1 713.0 7.01 5 I-V Curve Characteristics Uni-directional I Bi-directional IPP VC VBR VR IR VF IT VC VBR VR V IT IR IR IT VR VBR VC V IPP IPP PPPM Peak Pulse Power Dissipation -- Max power dissipation VR Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation VBR Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (I T) VC Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) IR Reverse Leakage Current -- Current measured at VR VF Forward Voltage Drop for Uni-directional directional Specifications are subject to change without notice. Please refer to http://www.ruilon.com.cn for current information. Revised: 2018-06-22 Page:3 Transient Voltage Suppressors (TVS) 5.0SMDJ Series Ratings and Characteristic Curves (TA=25°C unless otherwise noted) Figure 1 - TVS Transients Clamping Waveform Figure 2 - Peak Pulse Power Rating Curve Voltage Transients 1000 PPPM-Peak Pulse Power (kW) TJ initial = Tamb Voltage or Current Voltage Across TVS Current Through TVS 100 5kW at 10x1000μs, 10x1000 25°C 10 1 0.001 0.01 Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % 1 10 td-Pulse Pulse Width (ms) ( Time Figure 3 - Pulse Derating Curve 0.1 Figure 4 - Pulse Waveform 100 IPPM - Peak Pulse Cur rent, % IRSM 150 80 60 40 20 tr=10μsec 25 50 75 100 125 Peak Value IPPM 100 Half Value IPPM ( IPPM ) 2 50 10/1000μsec.Waveform as defined by R.E.A td 0 0 TJ =25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM 0 150 175 0 1.0 TA-Ambient temperature (ººC) 2.0 3.0 4.0 t-Time(ms) Figure 5 - Typical Junction Capacitance Figure 6 - Steady State Power Derating Curve Bi-directional V=0V Uni-directional directional V=0V 10000 1000 Uni-directional @VR Cj (pF) 100 Bi-directional @VR 10 1 1.0 10.0 100.0 1000.0 PM(AV), Steady State Power Dissipation (W) 100000 5.0 4.0 3.0 2.0 1.0 0 0 25 50 75 100 125 150 175 TL-Ambient Temperature T (ºC) VBR - Reverse Breakdown Voltage (V) Specifications are subject to change without notice. Please refer to http://www.ruilon.com.cn for current information. 6.5 6.0 Revised: 2018-06-22 Page:4 Transient Voltage Suppressors (TVS) 5.0SMDJ Series Figure 7 - Maximum Non-Repetitive Surge Current IFSM - Peak Forward Surve Current (A) 350 300 250 200 150 100 50 0 1 10 100 Number of Cycles at 60 Hz Soldering Parameters - Reflow Soldering (Surface Mount Devices) Reflow Condition TP Ramp-up Critical Zone TL to TP TL Pre Heat Temperature TS(max) Ramp-down TS(min) Preheat Time to peak temperature (t 25℃ to peak) -Temperature Temperature Min (Ts(min)) 150°C -Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 -180 Seconds Average ramp up rate ( Liquids Liquid Temp TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflo w 25 Pb - Free assembly Time - Temperature (TL) (Liquids) 217°C - Time (min to max) (ts) 60 -150 Seconds Peak Temperature (TP) 260 +0/-5°C Time within 5°C of actual peak Temperature (tp) 20 - 40 Seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max Do not exceed 260°C Part Marking System Cathode band(for Uni-directional products only) RUILON XXXX XXX Date Code Product Code Marking code Specifications are subject to change without notice. Please refer to http://www.ruilon.com.cn for current information. Revised: 2018-06-22 Page:5 Transient Voltage Suppressors (TVS) 5.0SMDJ Series Dimensions Cathode Band Millimeters DIM Inches Min Max Min Max A 2.90 3.20 0.114 0.126 B 6.60 7.15 0.260 0.281 C 5.55 6.22 0.219 0.245 D 1.98 2.62 0.078 0.103 E 0.75 1.52 0.030 0.060 G 7.75 8.13 0.305 0.320 I 3.30 - 0.129 - J 2.40 - 0.094 - K - 4.20 - 0.165 L 2.40 - 0.094 - Taping and Reel Specifications Symbol Millimeters Inches W 16±0.3 0.630±0.012 P 8±0.1 0.315±0.004 F 7. 7.25±0.1 0.285±0.004 E 1.75±0.1 0.069±0.004 D 1.5+0.1/ 1.5+0.1/-0.0 0.059+0.004/-0.0 P0 4±0.1 0.157±0.004 P2 2±0.1 0.079±0.004 D0 16.7 16.7±0.15 0.657±0.006 D1 178±2 7.007±0.079 D2 59.6 59.6+1/-2 2.346+0.039/-0.079 W1 17.2 17.2±0.4 0.677±0.016 Direction of Unreeling Part Number Component package Quantity Packaging option Packaging specification 5.0SMDJXXXA/CA DO-214AB 500 Tape&Reel-16mm/7”tape EIA STD RS-481 Specifications are subject to change without notice. Please refer to http://www.ruilon.com.cn for current information. Revised: 2018-06-22 Page:6