CTS5F-100J

Shielded Inductors- Axial CTS5F Series www.ctparts.com SPECIFICATIONS Please specify inductance tolerance code when ordering. CTS5F-1R0_ J =±5%, K =±10% Part Inductance Number (µH) From 1µH to 100µH L Test Freq. (MHz) Q Factor Min. Q Test Freq. (MHz) CTS5F-1R0_ 1.0 7.9 55 7.9 CTS5F-2R5_ 2.5 7.9 45 7.9 CTS5F-5R0_ 5.0 7.9 35 7.9 CTS5F-100_ 10 2.5 65 2.5 CTS5F-250_ 25 2.5 55 2.5 CTS5F-500_ 50 2.5 60 2.5 CTS5F-101_ 100 2.5 70 2.5 SRF Min. (MHz) DCR Max. (Ω) Rated DC (mA) 200 115 90 55 35 27 20 0.05 0.08 0.12 0.42 0.80 1.50 3.10 2200 1700 1400 770 560 400 280 PHYSICAL DIMENSIONS Size mm inches A B C 22 AWG Max. Max. Typ. 11.43 3.81 29.2 0.6430 0.45 0.15 1.15 0.02535 Not Shown at Actual Size CHARACTERISTICS Description: Axial leaded molded (shielded) inductor Applications: Used for high reliability applications. Vital for telecommunication applications. Ideal for various RF applications. Operating Temperature: -55°C to +125°C Inductance Tolerance: ±5% & ±10% Testing: Inductance and Q are tested on a HP4285A at specified frequency Packaging: Bulk pack Current Rating: Based on .33 watt power dissipation for approximately 20°C temperature rise Marking: Printed with inductance code Miscellaneous: RoHS Compliant Testing: Inductance is measured on a HP4285A at 1kHz Leads: Soft copper and pre-tinned Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2019 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice REV 10.01.19