05024402001

977 Screwdriver for TORX® screws, 25 x 100 mm Kraftform Plus – Series 900 EAN: 4013288094766 Size: 205x37x37 mm Part number: 05024402001 Weight: 121 g Article number: 977 TORX® Country of origin: CZ Customs tariff number: 82054000 Chiseldriver for fastening, chiselling and loosening Hexagonal blade extending through the handle Handle markings simplify finding and sorting of tools Impact cap and bolster for the transfer of higher torque The Wera Black Point tip offers an exact fit and optimum corrosion protection Wera Chiseldriver for fastening, chiselling and loosening seized screws. Multi-component Kraftform handle for fast and low-fatigue working. A hexagon blade out of high quality bit material that extends right through the blade ensures full transfer of force, even when struck with a hammer. Ductile tempered material to prevent the blade from splintering or breaking. Comes with an impact cap for durability and reduced risk of splintering. More torque can be transferred with the help of an open-end or ring spanner applied to the integrated hexagonal bolster. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace and handle markings make for simplified finding and sorting of the tool. Web link http://products.wera.de/en/tools_for_the_aerospace_segment_screwdrivers_kraftform_plus__series_900_977_torx.html Wera - 977 TORX® 05024402001 - 4013288094766 Wera Werkzeuge GmbH 02.08.2018 - 1 / 3 Korzerter Straße 21-25 D-42349 Wuppertal Tel: +49 (0)2 02 / 40 45-0 E-Mail: info@wera.de 977 Screwdriver for TORX® screws, 25 x 100 mm Kraftform Plus – Series 900 Integrated impact cap Pound-thru blade Integrated hex bolster Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of highquality bit material extends right through the handle – thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. Wera Black Point tip Kraftform Prevents hand injuries Non-roll feature The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The basic idea for the prototype of the Kraftform handle – that the hand should dictate the design – has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hexagonal non-roll feature prevents any rolling away at the workplace. Web link http://products.wera.de/en/tools_for_the_aerospace_segment_screwdrivers_kraftform_plus__series_900_977_torx.html Wera - 977 TORX® 05024402001 - 4013288094766 Wera Werkzeuge GmbH 02.08.2018 - 2 / 3 Korzerter Straße 21-25 D-42349 Wuppertal Tel: +49 (0)2 02 / 40 45-0 E-Mail: info@wera.de 977 Screwdriver for TORX® screws, 25 x 100 mm Kraftform Plus – Series 900 Further versions in this product family: mm mm mm mm inch 05024400001 TX 15 5 8 80 98 3 1/8 05024401001 TX 20 5 8 90 98 3 1/2 05024402001 TX 25 6 10 100 105 4 05024403001 TX 27 6 10 125 105 5 05024404001 TX 30 8 13 150 112 6 05024405001 TX 40 8 13 150 112 6 Web link http://products.wera.de/en/tools_for_the_aerospace_segment_screwdrivers_kraftform_plus__series_900_977_torx.html Wera - 977 TORX® 05024402001 - 4013288094766 Wera Werkzeuge GmbH 02.08.2018 - 3 / 3 Powered by TCPDF (www.tcpdf.org) Korzerter Straße 21-25 D-42349 Wuppertal Tel: +49 (0)2 02 / 40 45-0 E-Mail: info@wera.de