05052490001

887/4 RR Rapidaptor Universal Bit Holder with ring magnet, 1/4 inch x 57 mm x 1/4 inch Rapidaptor Bit Holders EAN: 4013288104045 Size: 86x24x24 mm Part number: 05052490001 Weight: 50 g Article number: 887/4 RR Country of origin: CZ Customs tariff number: 84661038 Rapidaptor technology for rapid bit change Rapidaptor universal holder with ring magnet for bits with 1/4" hexagon drive Rapidaptor technology for rapid bit change Ring magnet and stop sleeve for secure fit of the screw on the holder 1/4" hexagon drive Rapidaptor universal holder for bits with hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). The floating, free-turning magnetic sleeve securely holds even large and heavy screws. The Rapidaptor allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward. This enables rapid bit change with just one hand. ¼” hexagonal, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3. Web link http://products.wera.de/en/bits_holders_adaptors_holders_adaptors_connectors_rapidaptor_bit_holders_887_4_rr.html Wera - 887/4 RR 05052490001 - 4013288104045 Wera Werkzeuge GmbH 02.08.2018 - 1 / 3 Korzerter Straße 21-25 D-42349 Wuppertal Tel: +49 (0)2 02 / 40 45-0 E-Mail: info@wera.de 887/4 RR Rapidaptor Universal Bit Holder with ring magnet, 1/4 inch x 57 mm x 1/4 inch Rapidaptor Bit Holders Ring magnet Rapidaptor Rapidaptor with ring magnet Rapidaptor holder Rapidaptor Bit Holders Special design powerful ring magnet, for larger and heavier screws. Ideal for overhead work, too. The floating, free-turning magnetic sleeve securely holds even large and heavy screws to enable immediate application. There is no need to hold the screw when applying the tool – something which can be dangerous and painful. Also ideal for overhead work. Rapid bit change without needing any additional tools. One-hand operation with a freely spinning sleeve for simplified guidance of the tool. Also available in a BiTorsion design. Wera developed the Rapidaptor that allows rapid bit change without any extra tools with only one hand. Bit Holders and Adaptors We were not happy that bit change with bit holders was often quite cumbersome. We found out that strong magnets or retaining rings indeed hold the bit securely, but they greatly impede removal from the holder. So we have developed bit holders that indeed reliably hold the bit, yet still allow for fast and trouble-free bit change. The solution: bit holders with quickrelease mechanisms that lift the bit from the magnets. Bit holders which – depending on the requirements – additionally have elastic zones that absorb peak loads. Or rapid-spin sleeves with which the cordless or electric screwdrivers can be guided during the screwdriving process. Web link http://products.wera.de/en/bits_holders_adaptors_holders_adaptors_connectors_rapidaptor_bit_holders_887_4_rr.html Wera - 887/4 RR 05052490001 - 4013288104045 Wera Werkzeuge GmbH 02.08.2018 - 2 / 3 Korzerter Straße 21-25 D-42349 Wuppertal Tel: +49 (0)2 02 / 40 45-0 E-Mail: info@wera.de 887/4 RR Rapidaptor Universal Bit Holder with ring magnet, 1/4 inch x 57 mm x 1/4 inch Rapidaptor Bit Holders Further versions in this product family: inch mm inch inch mm 05052490001 1/4" 57 2 1/4 1/4" 16 05160987001 1/4" 89 3 1/2 1/4" 16 05160988001 1/4" 152 6 1/4" 16 Web link http://products.wera.de/en/bits_holders_adaptors_holders_adaptors_connectors_rapidaptor_bit_holders_887_4_rr.html Wera - 887/4 RR 05052490001 - 4013288104045 Wera Werkzeuge GmbH 02.08.2018 - 3 / 3 Powered by TCPDF (www.tcpdf.org) Korzerter Straße 21-25 D-42349 Wuppertal Tel: +49 (0)2 02 / 40 45-0 E-Mail: info@wera.de