D03156

Telescopic Inspection Mirror with LED Light Description A LED telescopic inspection mirror which is an ideal tool for those difficult to see jobs. It can be positioned to nearly any angle and has a cushion grip extendable shaft. Features •  •  •  •  Inspection mirror can be positioned to any angle Telescopic stainless steel shaft with cushion grip extends from 285 to 875mm 3 LEDs are operated by a simple on/off switch Powered by 2 × CR2032 batteries (included) Part Number Table Description Part Number Telescopic Inspection Mirror With LED Light D03156 Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. DURATOOL is the registered trademark of Premier Farnell Limited 2019. Newark.com/exclusive-brands Farnell.com/exclusive-brands Element14.com/exclusive-brands Page 22/03/22 V1.0