79-3925

Nozzles Material : Stainless Steel Diagrams: Dimensions : Millimetres www.element14.com www.farnell.com www.newark.com www.cpc.co.uk www.mcmelectronics.com Page 15/04/16 V1.0 Nozzles Dimensions : Millimetres Part Number Table Description Part Number Description Part Number Nozzle, 2.5mm Dia. 79-3901 Nozzle, SOJ, 9.5 × 2.5mm 79-3960 9.4mm 9.4mm Nozzle, 14 × 14mm 9.2mm xx 9.2mm 79-3902 Nozzle, SOJ, 15 × 19mm 79-3961 Nozzle, 17 × 17mm 79-3903 Nozzle, SOP, 20 × 9mm 79-3969 Nozzle, 20 × 20mm 79-3904 Nozzle, SOP, 11 × 6mm 79-3970 Nozzle, 16 × 20mm 79-3905 Nozzle, SOP, 29 × 10mm 79-3971 Nozzle, 29 × 29mm 79-3906 Nozzle, BGA, 10 × 10mm 79-3980 Nozzle, 4.4mm Dia. 79-3907 Nozzle, BGA, 13 × 13mm 79-3981 Nozzle, 4.1 × 9mm 79-3908 Nozzle, BGA, 16 × 16mm 79-3982 Nozzle, 8 × 13mm 79-3910 Nozzle, BGA, 17 × 17mm 79-3983 Nozzle, 8 × 19mm 79-3921 Nozzle, BGA, 19 × 19mm 79-3984 Nozzle, PLCC, 28 × 28mm 79-3925 Nozzle, BGA, 28 × 28mm 79-3987 Nozzle, SOP, 28 × 28mm 79-3926 Nozzle, BGA, 36 × 36mm 79-3989 Nozzle, Fine 45 Deg. 79-3929 Nozzle, BGA, 39 × 39mm 79-3990 Nozzle, SOJ, 18 × 7mm 79-3950 Nozzle, BGA, 41 × 41mm 79-3991 Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. DURATOOL is the registered trademark of the Group. © Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk www.mcmelectronics.com Page 15/04/16 V1.0