9P056R

Pliers 9P046R: 9P055R: Dimensions : Millimetres Dimensions : Millimetres 9P057R: Dimensions : Millimetres 9P056R: Dimensions : Millimetres http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Page 25/04/09 V1.0 Pliers Part Number Table Description Part Number Plier, Snipe Nose, 150mm 9P046R Plier, Bent Nose, 125mm 9P055R Cutter, Diagonal, 110mm 9P057R Plier, Long Nose, 110mm 9P056R Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. DURATOOL is the registered trademark of the Group. © Premier Farnell plc 2009. http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Page 25/04/09 V1.0