D01494

Spacer Features: •  •  •  •  •  •  •  Material Designation Product Description Dielectric Strength Volume Resistivity CTI HVTR D495 Colour Minimum Thickness (mm) : 101(+)(f1), 101F(+)(f1), 101L(+)(f1), E101(+)(f1), E101L(f1), 132F(+)(f1), 135F(+)(f1) : Polyamide 66 (PA66), designated "zytel" furnished as pallets : 13kV/mm : 14 (10kΩ-cm) :0 :0 :6 Flame Class 0.71 All 1.5 3 HWI HAI RTI Elec RTI Imp RTI Str 4 V-2 6 3 IEC GWIT IEC GWFI 725 0 130 75 85 2 750 960 800 (+) Virgin and regrind up to 50% by weight inclusive, have the same basic material characteristics. (f1) Suitable for outdoor use with respect to exposure to ultraviolet light and water exposure. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk www.mcmelectronics.com Page 02/04/13 V1.0 Spacer Dimensions : Millimetres Part Number Table Description Part Number Hex Threaded Spacer, Natural D01494 Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. DURATOOL is the registered trademark of the Group. © Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk www.mcmelectronics.com Page 02/04/13 V1.0