D01766

Rare Earth Magnets 8mm X 3mm (PK10) Features •  T  hese are barrel-shaped Rare Earth Magnets (also known as   Neodymium) plated with bright Nickel for added durability •  Very powerful magnets allow magnet-attracting metal tools to be held to our powder coat painted, baked finish metal tool boards •  Works well for most smaller tools like screw drives, pliers   For larger tools we recommend placing 2 magnets •  Can be placed anywhere on the board-completely customizable •  Much easier than pegboard with its hooks and holes •  Rated at N35 to N45 international units of magnetic strength •  Keep their magnetic strength permanently Specification Box Quantity: External Diameter Height Magnet Type Tool Body Material : 10 : 8mm : 3mm : Button : Neodymium Iron Boron Part Number Table Description Part Number Magnets, Rare Earth, 8mm × 3mm (PK10) D01766 Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any  assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. DURATOOL is the registered trademark of the Group. © Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk www.mcmelectronics.com Page 20/03/12 V1.0