D00992

Tool Clips Pack of 10, Various Sizes Features •  Commonly used for holding piping of tools in workshops securely •  Zinc plated finish Specification Clip Type : Tool Clip Drawing D00992 D00993 D00994 D00995 D00996 Part Number Table Dimensions : Millimetres Description Part Number Tool Clips Zinc Plated 10mm, (PK10) D00991 Tool Clips Zinc Plated 13mm, (PK10) D00992 Tool Clips Zinc Plated 20mm, (PK10) D00993 Tool Clips Zinc Plated 25mm, (PK10) D00994 Tool Clips Zinc Plated 32mm, (PK10) D00995 Tool Clips Zinc Plated 38mm, (PK10) D00996 Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. DURATOOL is the registered trademark of Premier Farnell Limited 2019. Newark.com/exclusive-brands Farnell.com/exclusive-brands Element14.com/exclusive-brands Page 09/08/21 V1.0