9PK-3003D1

Die Set Crimp Tool Replacement Features: 9PK-3003D1: •  22 to 10 AWG insulated terminals/colour coded nests 9PK-3003D2: •  22 to 12 AWG non-insulated open barrel connectors, commercial type 9PK-3003D3: •  Cambridge CP-88, CP-89, BNC/TC coax connectors with RG-58, RG-59/62 AU cables (Hex 0.35, 0.068 and 0.228) 9PK-3003D5: •  RG-58, RG-174 and RG-8218 for both 50 and 75 ohm cables (Hex 0.213, 0.178, 0.068 and 0.042) 9PK-3003D6: •  N-series and RG-8/11 connectors (Hex 0.429, 0.1 and 0.08) 9PK-3003D7: •  RG-174, mini 59 BNC/TC connectors (Hex 0.178, 0.128 and 0.068) 9PK-3003D10: •  RG-59, RG-6, F-type CATV connectors (Hex 0.35, 0.32 and 0.255) 9PK-3003D11: •  RJ-45, eight-position keyed or non-keyed modular plugs (excluding AMP) 9PK-3003D12: •  RJ-11, two, four and six-positions modular plugs 9PK-3003D13: •  RJ-11, DEC MMJ six-position modular plugs with an offset release tab 9PK-3003D14: •  AMP RJ-45 eight-position modular plugs/primary strain relief crimp bar is located further back on die/modular plugs 9PK-3003D1 9PK-3003D15: •  RG-58, RG-59/62, BNC/TNC coax connectors (Hex 0.255, 0.213 and 0.068) 9PK-3003D2 9PK-3003D3 www.element14.com www.farnell.com www.newark.com www.cpc.co.uk www.mcmelectronics.com Page 22/11/12 V1.0 Die Set Crimp Tool Replacement 9PK-3003D5 9PK-3003D6 9PK-3003D7 9PK-3003D10 9PK-3003D11 9PK-3003D13 9PK-3003D12 9PK-3003D14 www.element14.com www.farnell.com www.newark.com www.cpc.co.uk www.mcmelectronics.com Page 22/11/12 V1.0 Die Set Crimp Tool Replacement 9PK-3003D15 Part Number Table Description Part number Die Set, Insulated 9PK-3003D1 Die Set, Non-Insulated 9PK-3003D2 Die Set, Coaxial CP-88, CP-89 9PK-3003D3 Die Set, RG-58, RG-174 9PK-3003D5 Die Set, N Series 9PK-3003D6 Die Set, RG-174, Mini RG-59 9PK-3003D7 Die Set, RG-59, RG-6 9PK-3003D10 Die Set, RJ-45 9PK-3003D11 Die Set, RJ-11 9PK-3003D12 Die Set, RJ-11 DEC MMJ 9PK-3003D13 Die Set, AMP, RJ-45 9PK-3003D14 Die Set, RG-58, RG-59 9PK-3003D15 Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. DURATOOL is the registered trademark of the Group. © Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk www.mcmelectronics.com Page 22/11/12 V1.0