A and C Weighted Digital Sound Level Meter
30dB to 130dB
Specifications
Sound pressure Measurement Scope
30~130dB at A, 35~130dB at °C
Sound pressure Frequency Response
30Hz~8kHz
Sound pressure Frequency Weighting
A and C
Accuracy
30-130dBA 35-130dBC
Dynamic Range Of Sound Pressure
A and C characteristics
Dynamic characteristic Of Sound Pressure
FAST 125ms, SLOW 1sec
Microphone
polarized capacitive microphone
Digital Display
4-digit,resolution:0.1dB,sampling rate:2 times/sec
Bar graph Display
Each analog bar represents 1dB,sampling rate is 20times/sec
Measurement gear Level
30~80dB, 40~90dB, 50~100dB, 60~110dB, 70~120dB, 80~130dB,
6 gear levels in total
Automatic Shifting Gear Level
Microcomputer will automatically select the best gear level in the
range from 30 to 130dB
Fast/Slow Selection
√
Data Hold
√
Backlight
√
Max.
√
Power Supply
4x1.5V AAA Batteries
Size
196mm×60mm×30mm
Weight
Approx.190g
Part Number Table
Description
Part Number
A and C Weighted Digital Sound Level Meter, 30dB to 130dB
D03130
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for
the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness,
any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make
any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or
where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its
negligence. DURATOOL is the registered trademark of Premier Farnell Limited 2019.
Newark.com/exclusive-brands
Farnell.com/exclusive-brands
Element14.com/exclusive-brands
Page
29/04/22
V1.0
很抱歉,暂时无法提供与“D03130”相匹配的价格&库存,您可以联系我们找货
免费人工找货