D02310

Combination Spanners Various Sizes and Sets Features: •  Offset metric combination wrenches •  Made from chrome vanadium •  Equal sizes at both ends Part Number Table Description Combination Spanner Size (mm) Length (mm) Part Number 8 100 D02308 10 110 D02309 11 120 D02310 12 130 D02311 13 140 D02312 14 150 D02313 15 160 D02314 17 180 D02315 19 220 D02316 21 260 D02317 22 280 D02318 24 300 D02319 Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. DURATOOL is the registered trademark of the Group. © Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk www.mcmelectronics.com Page 01/09/14 V1.0