Test Tools Catalog
Volume one, 2007
Fluke Ti20
Thermal Imager
Fluke 975
AirMeter™
Fluke 1587
Insulation Multimeter
Find it. Fix it. Fast.
Fluke 199C
Color ScopeMeter®
Test Tools Catalog
Volume 37, 2007
Contents
Fluke tools for:
Commercial Electricians....................................... 3
Industrial Electricians........................................... 4
HVAC/IAQ Technicians......................................... 5
Online resource centers................................... 6
Fluke test tool information.............................. 7
Safety and its importance................................ 8
Service, repair, and calibration..................... 9
Digital Multimeters
Multimeter Selection Guide............................... 10
Faster, Safer Multimeters................................... 11
189 Logging Multimeter..................................... 12
FlukeView Forms® Software............................. 13
87V Industrial Multimeter.................................. 14
179 Digital Multimeter........................................ 15
Family of True-rms Digital Multimeters........... 16
117 and 115 True-rms Digital Multimeters.......17
116 and 114 True-rms Digital Multimeters...... 18
77-IV and 73-III Digital Multimeters................ 19
27 Waterproof Multimeter................................. 19
88V Automotive Multimeter..............................20
8845A/8846A 6.5 Digit Precision
Multimeters.......................................................... 21
Electrical Testers
T3 and T5 Electrical Testers, VoltAlert™..........22
9040 Rotary Field Indicator..............................22
Earth Ground Testers
1625 and 1623 Geo Earth Ground Testers......23
1630 Earth Ground Clamp Meter,
Handy Geo Earth Ground Tester.......................24
Power Quality Analyzers
430 Series Power Quality Analyzers................25
43B Power Quality Analyzer.............................26
1760 Power Quality Recorder, 1650 RPM
Power Recorder................................................... 27
1740 Series Three-Phase PQ Loggers,
VR101S Voltage Event Recorder System.........28
1735 Three-Phase Power Logger,
Norma 4/5000 Power Analyzers......................29
Clamp Meters
Fluke 345 and LH1050, LH1060
Power Clamp Meters..........................................30
Fluke 360 and LH41 Current Clamp Meters,
LH2015 True-rms Clamp Meter......................... 31
Better Clamp Meters from Fluke.......................32
330 and 320 Series Clamp Meters...................33
902 True-rms HVAC Clamp Meter....................54
Insulation Testers and MegOhmMeters
1550B and 1520 Megohmmeters.....................34
1587 and 1577 Insulation Multimeters............35
1507 and 1503 Insulation Testers....................36
Process Calibration Tools
Process Tools Selection Guide........................... 37
744, 743B, 741B Documenting Process
Calibrators............................................................38
726, 725 Precision Multifunction Process
Calibrators............................................................39
724, 714, 712 Temperature Calibrators............40
718, 717 Pressure Calibrator, 700 Series
Pressure Modules................................................ 41
715, 707, 705 Loop Calibrators.........................42
789, 787 Process Meters....................................43
771 Milliamp Process Clamp Meter..................44
9102S, 9100S Handheld Drywell
Temperature Calibrators....................................44
Intrinsically Safe Products
707Ex, 718Ex, 725Ex, 700PEx, 574-NI,
68IS, 87V Ex........................................................45
Thermal Imagers
Ti40/Ti50 Series IR FlexCam®
Thermal Imagers...........................................46-47
Ti20 Thermal Imager..........................................48
Ti30™ Thermal Imager.......................................49
TiR4, TiR3, TiR2 IR FlexCam™
Thermal Imagers and IR InSight XS,
XST Thermal Imagers.........................................50
Thermometers
570 Series Infrared Thermometers................... 51
54 Series II Contact Thermometers..................52
561 HVACPro Thermometer...............................52
60 Series Infrared Thermometers.....................53
United States
General product and sales
information: 1-888-44-FLUKE
Fluke Thermal Imagers:
1-800-760-4620 (U.S. only) all
other regions 1-425-446-4620
Service and calibration:
1-800-993-5853
Parts: 1-800-526-4731
Canada
General product and sales
information: 1-800-36-FLUKE
Service, parts and calibration:
1-800-36-FLUKE
canada@fluke.com
Australia
General product and sales
information: (2) 8850-3333
Parts: (2) 8850-3333
Service and calibration:
(2) 9771-9300
Singapore
General product and sales
information: 6738-5655
info.asean@fluke.com
Service, parts and calibration:
6737-2922
service.asean@fluke.com
Japan
General product and sales
information: +81-3-3434-0180
Service, parts and calibration:
+81-3-3434-0188
Other countries: 1+(425) 446-5500
HVAC/Indoor Air Quality Tools
975 AirMeter,™ 902 True-rms
HVAC Clamp Meter.............................................54
971 Temperature Humidity Meter,
983 Particle Counter...........................................55
ScopeMeter® Test Tools
ScopeMeter Test Tools Selection Guide...........56
124 Industrial ScopeMeter Test Tools.............. 57
190 Series Color ScopeMeter Test Tools..........58
Fluke ScopeMeter Accessories..........................59
Accessories
Accessory Selection Guide.................................60
Accessory Sets and Kits..................................... 61
SureGrip™ Accessories........................................62
Accessories for Electronic and Automotive
Applications and High Voltage Probes.............63
Lights, Software and Specialty
Accessories................................................... 64-65
Current Clamps..............................................66-67
Temperature Accessories............................ 68-69
Cases, Holsters and Fuses............................ 70-71
What’s new from Fluke.....................back cover
Contact us:
Application
segment key
To help you better identify the
right product for your job, you
will find the applicable icons
located on the outside edge of
each product page.
Fluke test tools to
help you get the job done
Fluke tools for commercial electricians
Legend
Power Distribution Center
Heat Exchanger
HVAC Blower
Drive Control
Motor and Motor Control Center
Electrical
• • • ••
•
•••
•• •
Fluke 1AC II VoltAlert Voltage
Detector
Fluke 116 Digital Multimeter
Fluke 62 Mini IR
Thermometer
Best suited for:
• Non-contact voltage
detection on electrical circuits
• Detecting voltage before work begins
Best suited for:
• Measures volts, ohms,
capacitance and
temperature
• Resistance and continuity
• 600 V ac and dc
measurement range
Best suited for:
• Surface temperature
readings
• Finding heating and
ventilation problems
• Non-contact monitoring
of electrical motors and
panels
See page 22 for details
See page 18 for details
See page 53 for details
Fluke T5 Voltage, Continuity
and Current Tester
Fluke 322 Clamp Meter
Fluke 87V Industrial True-rms
Multimeter w/temp
Best suited for:
• Measure loads on a branch
circuit at a service level
• Measure the load side
voltage of a circuit breaker
or fuse
• Map outlets to breakers
• Check individual voltages
(either ac or dc)
• Determine resistances up to
1000 ohms
• Check circuit continuity
Best suited for:
• Verify the presence of
load current, ac/dc voltage
and continuity
• Current measurements up to
400 A in tight cable
compartments
• Higher resolution for
loads below 40 A
Best suited for:
• VSD motor drive
installation and
troubleshooting
• Accurate frequency and
voltage measurements
on motor drives and
in electrically noisy
environments
• Built-in thermometer
for temperature
measurements
• CAT III 1000 V rated to protect against
high voltage transients up to 8 kV
See page 22 for details
See page 33 for details
See page 14 for details
Fluke test tools to
help you get the job done
Fluke tools for industrial electricians
Legend
Pumps
Drive Control
Blowers
Motors
•••
•••
•• •
•• •
Front line troubleshooting tools
Fluke 87V Industrial True-rms
Multimeter w/temp
Fluke 1587 Insulation
Multimeters
Fluke 337 AC/DC True-rms
Clamp Meter
Best suited for: VSD motor
drive installation and
troubleshooting.
Best suited for: Work on
motors, generators, cables or
switch-gear.
Features:
• Accurate frequency and
voltage measurements
on motor drives and
in electrically noisy
environments
• Built-in thermometer for
temperature measurements
Features:
• Measuring insulation test
voltages to 1000 V
• Prevents insulation test if
voltage > 30 V is detected
for added user protection
• Filter for motor drive
measurements
Best suited for: Measure inrush
current on electric motor startup
and electric motor testing and
troubleshooting
See page 13 for details
See page 35 for details
Features:
• Inrush current measurements
to measure start up current
on electric motors
• Frequency measurements to
help track down power
quality problems
See page 33 for details
Preventive and predictive maintenance
Fluke 434 Three-Phase PQ
Analyzer
Fluke 576 Photographic IR
Thermometer
Fluke Ti20 Thermal
Imager
Best suited for: Troubleshooting and preventing
problems in power distribution systems.
Best suited for: Measuring
surface temperatures, quickly
locating lubrication problems,
overloads, short-circuits or
misaligned and overheated
equipment.
Best suited for: Displaying
a visual image of surface
temperatures to easily and
safely identify potential
problems.
Features:
• Simultaneously measure
voltage and current on all
three phases and neutral
• High-resolution color screen simplifies
operation
• Tough enough for industrial environments,
easy to carry, works for seven hours per
battery charge
See page 25 for details
Features:
• Last ten temperature
readings displayed on
bar graph for easy reference
• Customizable log names, alarms and
emissivity values for more efficient, less
error-prone predictive maintenance
routes
See page 51 for details
For use on:
• Electrical power distribution systems
• Electro-mechanical equipment
• Process instrumentation
• Facility maintenance
See page 48 for details
Fluke test tools to
help you get the job done
Fluke tools for HVAC/IAQ technicians
Legend
Indoor Air Comfort
Superheat and Subcooling
Electrical
Motors/Pumps/Compressors
Building Diagnostics
Filtration and Ventilation
Furnace
00
0124
Fluke 975 AirMeter™
Fluke 983 Particle Counter
Fluke 116 Digital Multimeter
Best suited for:
Optimizing HVAC ventilation
settings for ASHRAE 62
recommendations
• Simultaneously measures,
logs and displays temperature, humidity, velocity,
CO2 and CO
Best suited for:
Troubleshooting and
maintaining indoor
air quality
• Measures particle size,
temperature, and relative
humidity
• Data logging and sixchannel particle size
display
Best suited for:
Troubleshooting HVAC
equipment and flame
sensors
• Thermometer and
microamps
• Volts ac/dc, resistance,
diode, continuity, and
Min/Max/Avg
See page 54 for details
See page 55 for details
See page 18 for details
Fluke 902 True-rms
HVAC Clamp Meter
Fluke 561 HVACPro IR
Thermometer
Fluke IR Insight XS/XST
Thermal Imagers
Best suited for: HVAC
system diagnosis and repair
• Capacitance and true-rms
• DC current to 200 µA
• Contact temperature
Best suited for: Measuring
hot, moving, electrical
energized objects
• Contact and non-contact
measurement
• Compatible with
standard type-K
thermocouple
• Includes Velcro® pipe
probe
Best suited for:
Quick, accurate building
diagnostic surveys
• High resolution
images and display
• Industry -leading
thermal sensitivity
• Simple, one-button
operation
See page 54 for details
See page 52 for details
See page 50 for details
Online resource centers
Test tool applications
Electrical Resource Center
HVAC/IAQ Resource Center
Plant Maintenance
Resource Center
Thermal Imaging
Resource Center
www.fluke.com/electrical_resource_ctr
Product demos, software downloads, earth
ground education, application notes, training and events information.
www.fluke.com/plant_resource_ctr
ROI calculator, PDM program, maintenance
techniques, tool profiles, common culprits.
www.fluke.com/IAQ
FAQs, white papers, case studies and
application notes, downloads, and
product demos.
www.fluke.com/thermal_resource
Online product selection guide, product
information, application notes, software
Building Diagnostics
Resource Center
Biomedical Resource Center
www.fluke.com/biomed_resource_ctr
Product news and information, catalog,
trade-up program, and tradeshow
schedule.
Electronics Resource Center
www.fluke.com/electronics_resource_ctr
Tips from the field, product demos, application notes, and product showcase.
Intrinsic Safety Resource Center
www.fluke.com/ex
Standards explanations, industry applications, guidelines, and product information.
Online Resource Centers
www.fluke.com/buildings
Image gallery, application notes, and
expert tips on using thermography to
identify structural, thermal, moisture, and
air leakage problems in buildings.
Precision Measurement and
Calibration Resource Center
www.fluke.com/precision_resource_ctr
New product information, e-news bulletins,
total solutions newsletter, industry links,
users community, used certified equipment,
technical papers and application notes.
Process Control
Resource Center
www.fluke.com/process_resource_ctr
Process calibration glossary, industry information, ROI calculator, application notes,
and product demos.
Solve more
problems with
Fluke Tools
Fluke is more than digital
multimeters. These days, Fluke
offers the ultimate go-everywhere
DMM as well as specialized tools
for electrical, industrial, HVAC, and
electronic applications.
Increasingly, technicians are
using their Fluke tools together,
in a one-two troubleshooting
combination.
Use a thermal imager to find a
problem, then use a DMM, clamp
meter, or power quality analyzer to
fix it.
Use a power logger to check
power usage, use an AirMeter to
optimize the HVAC system, and then
log power again to see the impact of
your adjustments.
The online resource centers on
this page can help you find the right
tools for your applications, learn
how to use them, and get to work.
Your site-specific knowledge plus
Fluke tools makes for an impressive
troubleshooting team.
Plus, the new generation of Fluke
tools is smaller, lighter, and easier
to use than ever. They meet higher
safety standards. They download to
reports. And they’re as reliable and
tough as ever.
By offering a system of tools that
work together, Fluke aims to help
you solve more problems, faster and
better, no matter where you work.
Utilities Resource Center
www.fluke.com/utilities_resource_ctr
Training and events information, product
demos, specialized technical support,
application notes, and power quality,
thermography and earth ground information for utilities.
Fluke...
more than just tools
Test tool information
Since 1949 the Fluke Corporation has been dedicated to the design
and manufacturing of innovative test and measurement instruments.
Fluke also leads the way in providing programs, training and
resources that help you stay at the forefront of your profession.
FlukePlus
Tool Info Online
Electrical Measurement Safety Program
FlukePlus is a website for test tool users
who want to learn more. Sign up and get:
• Product tips and “how to” articles
• Previews of the newest Fluke tools
• Special offers and promotions
• Direct connection to Fluke technical
support
Get a free safety video, a summary of
safety standards and helpful articles on
safe electrical measurement practices.
(Available only in the U.S.)
www.fluke.com/flukeplus
www.fluke.com/safety
Test Tool Users
Online Community
www.fluke.com/community
See what other test tool users are saying
and get your questions answered, fast!
The Test Tool Community online bulletin
board is free and open to everyone.
Fluke Education
Partnership Program
www.fluke.com/education
We’ve teamed up with colleges, trade,
technical, vocational schools, and apprenticeship programs to bring the latest
application information and tools into the
classroom. Currently available in USA,
Canada, Brunei, Burma, India, Indonesia,
Laos, Malaysia, Philippines, Singapore,
Taiwan, Thailand and Vietnam.
Application Notes
www.fluke.com/appnotes
Fluke has a
complete library
of application notes and
white papers on
topics ranging
from predictive
maintenance to
maintaining
motors and
drives to
automotive
troubleshooting
and more.
Fluke News
www.fluke.com/flukenews
Fluke News is published two times
a year with new tips, tools and
articles in each issue.
Fluke Electrical News
For electrical
contractors or
electricians
working in
residential,
commercial,
or industrial
environments.
Fluke Plant News
For electricians,
electrical
supervisors,
field service
technicians,
plant
technicians
and process
engineers
maintaining
industrial
equipment in
the field or
plant.
Fluke Electronics News
For electronics
or electrical
engineers who
use DMMs,
benchtop
meters, and
oscilloscopes
in prototyping,
design and
field evaluation
situations.
Fluke HVAC/IAQ News
All-new articles
about tools,
measuring
practices,
and business
opportunities
for HVAC and
Indoor Air
Quality (IAQ)
professionals.
Fluke Test Tool Information
Safety and You
Why is safety important?
Why should you care?
Between five and ten times on any given
day, arc flash explosions, sufficient to send
a victim to a special burn center, take place
in the U.S. These incidents and other less
serious electrical accidents result in injury
—sometimes death—lost work time, medical
costs and insurance claims, downtime, the
list goes on.
The cost to both the victim, the victim’s
family and the company involved, are
high. Yet many of these accidents can be
prevented. The combination of training,
good measurement technique, and the use
of proper tools can significantly reduce the
chance of an accident occurring.
What are the Standards?
To provide improved protection for users,
industry standards organizations have
Go to www.fluke.com/safety to view The
taken steps to clarify the hazards present
Fluke Electrical Measurement Safety Program
in electrical supply environments. The
and order your free copy of the Fluke Safety
American National Standards Institute
video. This video makes the standards easy
to understand and can be used as part of
(ANSI), the Canadian Standards Association
your own internal safety program.
(CSA), and the International ElectroTechnical Commission (IEC), have created
more stringent standards for voltage test
equipment used in environments of up to 1000 volts.
ANSI, CSA and IEC define four measurement categories of over-voltage transient
impulses. The rule of thumb is that the closer the technician is working to the power
source, the greater the danger and the higher the measurement category number. Lower
category installations usually have greater impedance, which dampens transients and
helps limit the fault current that can feed an arc.
•
CAT (Category) IV is associated
with the origin of installation.
This refers to power lines at
the utility connection, but also
includes any overhead and
underground outside cable runs,
since both may be affected by
lightning.
•
CAT III covers distribution level
wiring. This includes 480-volt
and 600-volt circuits such as
3-phase bus and feeder circuits,
motor control centers, load
centers and distribution panels.
Permanently installed loads are
also classed as CAT III. CAT III
includes large loads that can
generate their own transients. At this level, the trend to using higher voltage levels in
modern buildings has changed the picture and increased the potential hazards.
•
•
CAT II covers the receptacle circuit level and plug-in loads.
CAT I refers to protected electronic circuits.
Some installed equipment may include multiple categories. A motor drive panel, for
example, may be CAT III on the 480-volt power side, and CAT I on the control side.
Independent testing labs help ensure safety compliance
You want your tools and equipment to help you work safely. But how do you know that
a tool designed to meet a safety standard will actually deliver the performance you are
paying for?
Unfortunately it’s not enough to just look on the box. The IEC (International
Electrotechnical Commission) develops and proposes standards, but it is not responsible
for enforcing the standards. Wording like “Designed to meet specification...” may not mean
a test tool actually performs up to spec. Designer’s plans are never a substitute for an
actual independent test.
For more information, go to www.fluke.com/safety
Safety
Underwriters
Laboratories (UL)
Canadian Standards
Association (CSA)
TUV and VDE
(German standards
organizations) are
approval/listing
agencies
United States
Department of
Labor Mine Safety
and Health
Administration
That’s why independent testing is
so important. To be confident, check
the product for the symbol and listing
number of Underwriters Laboratories
(UL), the Canadian Standards Association (CSA), TÜV or another recognized
testing organization. Those symbols can
only be used if the product successfully
completed testing to the agency’s
standard, which is based on national/
international standards. That is the
closest you can come to ensuring that
the test tool you choose was actually
tested for safety.
What does the CE symbol indicate?
A product is marked CE (Conformité
Européenne) to show it conforms
to health, safety, environment and
consumer protection requirements
established by the European Commission. Products from outside the European Union cannot be sold there unless
they comply with applicable directives.
But manufacturers are permitted to
self-certify that they have met the
standards, issue their own Declaration
of Conformity, and mark the product
“CE.” The CE mark is not, therefore, a
guarantee of independent testing.
Why are Fluke products different?
Don’t be confused by “Listed” vs.
“Designed to” in your test tools.
IEC sets the standards but does not
test or inspect for compliance. So a
manufacturer can claim to “design
to” a standard with no independent
verification. To be UL-Listed, CSA or
TUV-Certified, a manufacturer must
employ the listing agency to TEST
the product’s compliance with the
standard. Look for the listing agency’s
emblem on the meter.
Service Information
Think of Fluke first for technical
service, repair and calibration
Fluke customer support is ready to help
Application note, literature code
2153519:
Why calibrate test
equipment?
Why would
a digital test
tool need to be
calibrated? It’s
not as though
any analog
parts will go
out of balance.
Well, have any
events occurred
that would
render your
instruments
less accurate or
unsafe? Is accurate measurement essential to your
operations? Are you trending data?
Read this application note to find out
what causes calibration problems
and whether you should consider
calibrating your test instruments.
Visit www.fluke.com/why-calibrate
Application note, literature code
2138394:
Calibrating a thermometer.
Technical service at your fingertips
We know Fluke tool users put their tools through the paces, so we’re ready to answer
your questions and help keep your tools in top shape. No matter what application, in
what industry. And we’ll do it through real technical service professionals in Everett,
Washington.
When you need questions answered, call Sales and Application Support at
1-888-44-Fluke or email fluke-info@fluke.com
The Fluke experts answering your call can help with just about any test tool question.
They specialize in:
• Advice on what to buy, from problem analysis to tool compatibility and configuration
“If I’m working with three phase motors, what’s the best tool to use?”
• Help on how to use your tools in any application, from automotive to industrial
“How come I’m not getting a reading?”
“How do I transfer my test results?” “How do I measure harmonics?”
When your Fluke tools need repair or calibration, call Customer Support Services
at 1-888-99-Fluke or email service.status@fluke.com. Customers outside the U.S.
email service.international@fluke.com or visit www.fluke.com/service to find your
nearest location.
If your tool isn’t working correctly, or if you dropped it, ran over it, or dunked it in the pool,
call Fluke. If it’s not under warranty, we’ll give you a cost estimate over the phone. Once
you send it in, we’ll verify the problem, fix it, test it and put it back in the mail often in
less than five working days.
Fluke recommends having your DMMs, Calibrators and ScopeMeter test tools calibrated
once a year—especially if you use them often or need accurate measurements to meet
regulations requirements. Calibration compares your tool’s measurements to the accuracy
standard—sort of like setting your watch to match an atomic clock. Some test tools live a
pretty rough life. If you calibrate them, you know they’re accurate—even after what you
put them through.
Shocking treatment
Because of
our commitment to safety,
all Fluke
equipment
is designed
to provide as
much protection as possible from
the inherent
dangers of
working in the
unsettled sea
of electricity.
Fluke products are dropped, shocked,
short circuited, injected with thousands of volts of electricity and
forced to endure extreme temperature, just to get out the door.
To learn more about our product tests,
visit www.fluke.com/shocking
For more information on servicing your Fluke tools outside of the U.S., see page 2 for contact information.
Service
Pick the right digital
multimeter for you
Digital Multimeter Selection Guide
Models
Highest
True-rms and
accuracy with
Industrial
built-in
data logging troubleshooting thermometer
189
87V
179
Designed
for building
maintenance
117
Designed
for HVAC/R
technicians
116
Waterproof
and chemical
resistant
27
Two powerful
tools in one
1587
AC
AC
0.1 %
0.09 %
0.1 %
•
Basic features
True-rms readings
AC+DC
AC
AC
AC
AC
Basic dc accuracy
0.025 %
0.05 %
0.09 %
0.5 %
0.5 %
Wide bandwidth
100 kHz
20 kHz
•
•
•
•
•
•
Digits
4-1⁄2
4-1⁄2
3-1⁄2
3-1⁄2
3-1⁄2
3-1⁄2
Counts
50000
20000
6000
6000
6000
3200
Voltage ac/dc
1000 V
1000 V
1000 V
600 V
600 V
Current ac/dc
10 A
10 A
10 A
10 A
600 µA
Resistance
500 MW
50 MW
50 MW
40 MW
40 MW
Frequency
1 MHz
200 kHz
100 kHz
50 kHz
Capacitance
50 mF
10 mF
10 mF
10 mF
Temperature
+1350 °C
+1090 °C
+400 °C
Auto/manual ranging
4-20 mA loop
diagnostics
789
30 kHz
•
•
3-1⁄2
6000
4000
1000 V
1000 V
1000 V
10 A
400 mA
1A
32 MW
50 MW
40 MW
50 kHz
100 kHz
20 kHz
10 mF
10 mF
+400 °C
+500 °C
Measurements
dB
60 dB
Conductance
50 nS
50 nS
•
•
Duty cycle/pulse width
Motor drive measurements/low pass filter
32 nS
•
•
Continuity with beeper
•
•
•
•
•
•
•
•
Diode test
•
•
•
•
•
•
•
•
•
Display
Dual display
•
Analog bargraph
•
•
•
•
•
Backlight
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Data storage and exchange
Min/Max recording
Min/Max recording/with time stamp
Fast Min/Max
•
•
•
250 µs
250 µs
Display Hold/Auto (Touch) Hold
•
•
Relative reference
•
•
PC interface
•
•
Data logging
•
with PC
Readings memories
•
•
•
•
•
•
•
100
Other features
Automatic selection, LoZ
•
Insulation test range
0.01 MW to 2 GW
VoltAlert, non-contact ac voltage detector)
•
Real time clock
•
Overmolded case, integrated holster
•
Removable holster
•
•
•
•
•
ToolPak Magnetic Hangar compatibility
•
•
•
•
•
Closed case calibration
•
•
•
•
•
Separate battery door
•
•
•
•
•
Completely sealed/watertight
•
•
•
•
•
•
•
•
•
Automatic power off
•
•
•
•
•
Low battery indication
•
•
•
•
•
•
–20 °C, +55 °C
–20 °C, +55 °C
–10 °C, +50 °C
–10 °C, +50 °C
–10 °C, +50 °C
–40 °C, +55 °C
Operating temperature range
•
•
•
–20 °C, +55 °C
4-20 mA
•
24 V loop supply
•
Warranty and electrical safety
Limited lifetime warranty
•
•
•
Warranty (years)
Input alert
Dangerous voltage indication
•
3
•
3
•
•
•
•
•
CAT III measurements
1000 V
1000 V
1000 V
600 V
600 V
CAT IV measurements
600 V
600 V
600 V
12
14
15
17
18
See page
3
3
•
•
•
1000 V
1000 V
1000 V
600 V
600 V
19
35
43
More comprehensive information is available at www.fluke.com/dmm
10
Digital Multimeters
Test faster and safer
with a new Fluke
Move up to more measurement
performance and safety
Move up from your old 87 and benefit from more than a dozen improvements
Function
Original 87
87V
Benefit
Selectable filter for
motor drives
No
Yes
Accurate voltage and frequency
measurements on pulse width
modulated signals
Built-in thermometer
No
Yes
No separate thermometer required
Capacitance
5 nf to 5 µF
5 nf to 10,000 µF
Measure more capacitors
V dc accuracy and
resolution
0.1 %, 10 µV
0.05 %, 10 µV
Precise measurements in a
handheld tool
Display digits
13.5 mm x 7 mm
15.25 mm x 8.5 mm
30 % larger makes it easy to read
Backlight
Green
2-level, bright white
Easier to read in dark locations
Magnetic hanger
No
Optional (included with kit)
Position meter for easy viewing
Peak capture
1 ms
250 µS
Record intermittent problems four
times faster
CAT electrical safety
rating
No
Yes, 2nd edition ANSI and
IEC 61010
Increased protection from 8 kV
spikes that can cause arc flash
Battery door
No
Yes
Change battery quickly without
breaking cal seal
Warranty
Expired
Limited lifetime
Lower cost of ownership
87
87V
Get accurate voltage and frequency
measurements on adjustable speed
motor drives with the 87V.
Move up from your old 8060 or 8062 and benefit from more than 20 improvements
Function
8060
189
Benefit
Built-in recorder with
time stamp
No
Yes
Record and view intermittent
problems without a chart recorder
PC interface
No
Yes, software optional
Transfer readings to a PC for
analysis and documentation
Built-in thermometer
No
Yes, probe optional
No need to carry a separate
thermometer
Capacitance
No
5 nf to 50,000 µF
Measure capacitors with one tool
V dc and V ac
resolution
10 µV
1 µV
Precise measurements in a
handheld tool
dBv and dBm
Yes
Yes
Measure communication circuits
Duty cycle and pulse
width
No
Yes
Measure control circuits
In-line current
2A
10 A, 1000 V fuse
Safely measure five times more
current
Relative offset
No
Yes
Remove test lead resistance
See small signal variations
Range selection
Manual, 8 switches
Auto/Manual range
Simpler to use, more durable
Peak capture,
MIN/MAX
No
250 µS
Record intermittent problems
Backlight
No
2-level, bright white
Easier to read in dark locations
Holster
No
Integrated overmold
Stands up to accidental drops
Magnetic hanger
No
optional TPAK
Position meter for easy viewing
CAT electrical
safety rating
No
Yes, 2nd edition
ANSI and IEC
Increased protection from 8 kV
spikes that can cause arc flash
Battery door
No
Yes
Change battery quickly without
breaking cal seal
Warranty
Expired
Limited lifetime
Lower cost of ownership
8060
189
Use the built-in data logging feature of the 189 to record readings
and the time they occurred to catch
intermittent problems.
Move up from your old 70 or 20 series and benefit from more than 15 improvements
Feature
Original 77
179
Benefit
True-rms
No
Yes
Accurate on non-linear signals
Accuracy, basic dc
0.3 %
0.09 %
Three times more accurate
Temperature
No
Yes
No need for a separate thermometer
Min/Max/Average
No
Yes
Capture intermittent problems
Display size
Small
20 % larger
Large, easy to read
Display backlight
No
Yes
Easy to read in dark locations
Simple to use
Yes
Yes
No retraining required
Probe holders
Yes
Improved
One-hand operation
Latest electrical measurement safety standards
Not rated
1000 V CAT III,
600 V CAT IV
Designed to withstand 8,000 volt peak transient
impulses and protect against arc flash
Optional magnetic hanger
No
Yes
Position meter in best location
Warranty
Expired
Limited lifetime
Lower cost of ownership
Frequency
No
Yes
Built in frequency counter
Capacitance
No
Yes
Measure motor capacitors and components
Max. ac voltage
750
1000
Wider measurement range
Battery door
No
Yes
Change battery quickly without breaking cal seal
77
179
The ultimate multi-purpose meter,
the 179 combines precision, safety
and reliability to help you get any
job done.
Digital Multimeters
11
FlukeTools
189 Logging
Test
Catalog
Multimeter
Volume 36
Solve complex problems for electronic
and industrial applications
Contents
The Fluke 189 is the most advanced meter with features,
precision and accuracy to troubleshoot industrial and
electronic equipment in the field or on the bench. The
Fluke 189 has a built-in data logger to record measurements unattended. Recorded data can be viewed on
the 189 or transferred to a PC with optional FlukeView®
Forms software.
• Built in data logger (Fluke 189) records reading and
time to catch intermittent problems
• True-rms, 100 KHz bandwidth for precise
measurement of non linear signals
• 0.025 % dc accuracy and 1 microvolt resolution for
bench meter performance in a handheld package
• Measure 20 A for up to 30 seconds, 10 A continuous
• Temperature, capacitance, dB, frequency, pulse width
and duty cycle to find more problems with one tool
• Large bright white display with dual parameter
readout to view multiple readings at once
• Min/Max with timestamp to record signal fluctuations
• Peak capture to measure transients as short as 250 µS
• Isolated IR communication port to send data to a PC
(with optional FVF pack)
• Premium test leads and alligator clips (AC72) included
• New! Optional USB data cable with FlukeView Forms
• New! Optional battery pack (BP189) extends battery
life to over 400 hours
Log and document
NEW! The 189/FVF2
Data Logging Multimeter
and Software Combo Pack
gives you a practical,
affordable approach to
predictive maintenance.
• With built-in data logger, the
•
Electrical safety
All inputs are protected to measurement CAT III 1000 V
and CAT IV 600 V.
Available in non-logging version as Fluke 187
•
•
Specifications – 189 and 187 DMMs
Function
Range and resolution
•
•
Best accuracy
180 Series
V dc
50.000 mV, 500.00 mV, 3000.0 mV, 5.0000 V, 50.000 V, 500.00 V, 1000.0 V
± 0.025 %
V ac
50.000 mV, 500.00 mV, 3000.0 mV, 5.0000 V, 50.000 V, 500.00 V, 1000.0 V
± 0.4 %
A dc
500.00 µA, 5,000 µA, 50.000 mA, 400.00 mA, 5.0000 A, 10.000 A*
± 0.15 %
A ac
500.00 µA, 5,000 µA, 50.000 mA, 400.00 mA, 5.0000 A, 10.000 A*
± 0.75 %
Resistance
500.00 W to 500.0 MW
± 0.05 %
Capacitance
1.000 nF to 50.00 mF
± 1.00 %
Frequency
500.00 Hz, 5.0000 kHz, 50.000 kHz, 999.99 kHz
Temperature
-200 ºC to 1350 ºC (-328 ºF to 2462 ºF)
± 0.005 %
•
•
•
189 helps you track down
elusive, intermittent problems,
monitoring equipment with
any of its functions, while you
do other jobs
Overlay data from six meters
or six time periods to find
cause and effect relationships
or for condition monitoring
applications
With break-through accuracy
and precision, catch events as
brief as 50 ms
Designed for harsh environments that would ruin most
data loggers or multimeters
Log up to 450 hours of data
using the extended battery pack
Turn data into meaningful
graphs and tables using
FlukeView Forms software
TPAK™ Magnetic Hanger
allows you to securely hang
your meter for monitoring or
hands-free use
Soft carrying case to protect
your investment
USB cable included with kit
± 1 % of reading
Duty cycle
10 % to 90 %, resolution 0.01 %
Pulse width
2 ranges, 499.99 ms and 999.9 ms, best resolution 0.01 ms
—
dBm, dBv
-62 to +60, resolution 0.01dB
3%
0.1 dB
*10 A continuous, 20 A for up to 30 seconds and not specified.
Battery life: 72 hours typical (alkaline), 450 hours typical with Battery Extender (BP189)
Size (LxWxD): 203 mm x 100 mm x 50 mm (8.00 in x 3.94 in x 1.97 in)
Weight: 0.545 kg (19.2 oz)
Recommended accessories – 189 and 187 DMMs
Included accessories
Every 180 series meter comes packaged with TL71 Silicone Test Leads,
probe holders, two AC72 Alligator
Clips, four AA batteries (installed),
CD-ROM (users manual and technical notes) and operator’s guide.
Ordering information
TL910
Electronic Test Probes
See page 63
TL81A
Test Lead Kit
See page 63
C125
Meter Case
See page 70
BP189
FVF-SC2
High Capacity Battery Pack FlukeView Forms Software
See page 65
See page 65
For more information and detailed specifications, go to www.fluke.com/dmm
12
Digital Multimeters
Fluke-189/FVF2 Logging Multimeter
and Software
Combo Pack
Fluke-189
Logging Multimeter
Fluke-187
Digital Multimeter
FVF-SC2
FlukeView Forms
Software w/cable
FlukeView Forms
Software
®
Utilize this powerful tool to
analyze your measurements
Harness the power of the data logging
function on your Fluke Digital Multimeter.
FlukeView Forms offers an easy-to-use,
customizable solution to help you document
logged data. Easy-to-use wizards allow you
to download readings from your Fluke tool
and display individual readings or a series of
measurements.
• Graph data to help you detect trends,
analyze, predict and prevent problems
• Print, save and share logged data
• Log live readings while connected to a PC,
or leave your Fluke 189 in place to capture
up to 1,000 readings for download to a PC
• Display readings from up to six different
meters on the same graph to show links
between multiple processes, events and
locations
• Record and display any function the
meter measures: volts, ohms, frequency,
capacitance, temperature, diode testing
and more
• Free demo-reader download allows
co-workers or clients to open your report
and interact with captured data
• Export data into Microsoft® Excel
Customize reports using your
specific data or company logo,
spot trends and document
interruptions or spikes.
A single graph overlaying two time
periods makes analysis easier.
To take a test drive of the power
of FlukeView Forms, download
demonstration software for free at
www.fluke.com/flukeviewforms
Use the FlukeView designer to turn
simple time and event data into
fully customized reports.
You can share reports and add notes to draw
attention to and explain anomalies.
Fluke 189, 189/FVF2 Kit and 187 capabilities
189/FVF2
189
187
Fluke 180 Series Multimeter
and premium test leads
•
•
•
Fluke’s top-of-the-line multimeter with maximum
feature set to troubleshoot any situation.
PC connectable
•
•
•
Use to download and document test results.
•
•
Logging capabilities
FlukeView Forms software
Benefit
Reduce man-hours by using logging to find
problems and intermittent glitches.
Document and print measurement data in a clear
and organized format.
•
Overlay and graph data from
up to six meters
•
•
Compatible with FlukeView
Forms Demo Reader
•
•
Find elusive cause/effective relationships.
•
Allow data to be distributed and shared with
individuals throughout a company for free.
Compatible with
FVF-SC2
FVF-SC1
FVF-SC3
Fluke 187 and 189
Digital Multimeters,
Fluke 1550B
MegOhmMeter,
Fluke 789
ProcessMeter™
Fluke 53-II and 54-II
Thermometers
Fluke 45 Bench Meter
For more information and detailed specifications, go to www.fluke.com/flukeviewforms
Digital Multimeters
13
Fluke 87V
Industrial Multimeter
Diagnostic functions for
maximum industrial productivity
The Fluke 87V has measurement functions, troubleshooting features, resolution and accuracy to solve more
problems on motor drives, in-plant automation, power
distribution and electro-mechanical equipment.
New features for maximum productivity
• Unique function for accurate voltage and frequency
measurements on adjustable speed motor drives and
electrically noisy equipment (87V and 87V Ex)
• Large digit display with bright two level backlight
makes the 87V significantly easier to read
• Measure 20 A for up to 30 sec, 10 A continuously
• Optional magnetic hanger for easy setup and viewing
while freeing your hands for other tasks (TPak)
• Expanded capacitance range to 10,000 µF
• Built-in thermometer (87V)
pplication note, literature code
A
2155830:
Multimeter measurements
on adjustable speed drives
utilizing the Fluke 87V DMM
How do I
troubleshoot
an adjustable
speed drive
with a digital
multimeter?
Read this and
other application notes at
www.fluke.
com/library
Electrical safety
All inputs are protected to CAT III 1000 V and CAT IV
600 V. They can withstand impulses in excess of 8,000 V
to help protect you from arc blast resulting from surges
and spikes.
Available in intrinsically safe version as the
Fluke 87V Ex.
Also available as 83V average responding
multimeter, see below for specifications
Features – 87V and 83V DMMs
Feature
Fluke 87V/E2 Industrial
Electrician’s Combo Kit
87V Ex
87V
83V
ATEX II 2G EEx ia IICT4 safety rating for use in Zone 1 and Zone 2
•
True-rms ac voltage and current for accurate measurements on non linear signals
•
•

Selectable filter for accurate voltage and frequency measurements on motor drives
•
•

0.05 % dc accuracy
•
•

4-1/2 digit mode for precise measurements
•
•
Built-in thermometer lets you carry one less tool
•
•
Large display digits and two level bright white backlight for increased visibility
•
•
•
10,000 µF capacitance range for components and motor caps
•
•
•
Peak capture to record transients as fast as 250 µs
•
•
Measure up to 1000 V ac and dc
•
•
•
Measure up to 10 A, 20 A for up to 30 seconds
•
•
•
Auto and manual ranging for maximum flexibility
•
•
•
Analog bargraph
•
•
•
Frequency to 200 kHz and % duty cycle
•
•
•
Min/Max and average recording to capture variations automatically
•
•
•
Relative mode to remove test lead resistance from low ohms measurements
•
•
•
Access door for fast battery changes without breaking the calibration seal
•
•
•

Make industrial troubleshooting even
more productive with accessories.
• 87V Industrial Multimeter
• New! C35 lightweight soft case
to provide optimal protection
and storage
• TL224 1.5 m silicone leads
resist heat
• TP238 removable probes with
4 mm of exposed metal for use
on industrial circuits
• AC220 retractable long reach
alligator clips
• ToolPak™ meter hanging accessory
to hold meter to steel surfaces
• 80BK K-type temperature probe
Included accessories
Specifications – 87V and 83V DMMs
Basic accuracy
87V
83V
600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V
0.05 %
0.1 %
AC volts
600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V
0.7 % (true-rms)
0.5 %
DC current
600.0 µA, 6000 µA, 60.00 µA, 600.O mA, 6.000 A, 10.00 A
0.2 %
0.4 %
AC current
600.0 µA, 6000 µA, 60.00 µA, 600.O mA, 6.000 A, 10.00 A
1.0 % (true-rms)
1.2 %
Temperature (excl. probe)
-200 °C to 1090 °C (-328 °F to 1994 °F)
1.0 %
—
80BK Temperature Probe
-40 °C to 260 °C (-40 °F to 500 °F)
Resistance
600.0 W, 6.000 kW, 60.00 kW, 600.0 kW, 6.000 MW, 50.00 MW
Capacitance
10.00 nF, 100.0 nF, 1.000 µF, 10.00 µF, 100.0 µF, 9,999 µF
Frequency
199.99 Hz, 1.9999 kHz, 19.999 kHz, 199.99 kHz
Function
Range and resolution
DC volts
2.2 °C or 2 %
—
0.2 %
0.4 %
1.0 %
1.0 %
0.005 %
0.005 %
Battery life: 400 hours typical with backlight off. Size (LxWxD): 201 mm x 98 mm x 52 mm (7.9 in x 3.8 in x 2 in).
Weight: 355 g (22 oz)
For more information and detailed specifications, go to www.fluke.com/dmm
14
Digital Multimeters
Every Fluke 83V and 87V meter
comes packaged with TL75 Test
Leads, AC72 Alligator Clips,
holster, 9 V battery (installed),
80BK Temperature Probe (87V only)
CD-ROM (users manual and technical notes) and operator’s guide.
Ordering information
Fluke-87-5
Industrial True-rms
Multimeter with
Temperature
Fluke-87-5/E2 Industrial
Electrician’s
Combo Kit
Fluke-83-5 Industrial Multimeter
Fluke 179 Digital
Multimeter
Versatile meters for maintenance
and field service
The 179 true-rms Multimeter has the features needed
to find most electrical and HVAC problems. Simple
to use with significant improvements over the original
Fluke 70 Series like true-rms, the 179 has more
measurement functions, conformance to the latest
safety standards and a much larger display that’s
easier to view.
Features include:
• Wide 1000 V measurement range
• True-rms for precise measurement of non
179/EDA2 Electronics
Multimeter and Deluxe
Accessory Combo Kit
• 179 True-rms Digital Multimeter
• New! C35 lightweight soft case
linear signals
Capacitance, resistance, continuity and frequency
Built-in thermometer (Fluke 179 only)
Large, easy-to-read display
Backlight for work in dimly lit areas
(Fluke 177 and179 only)
• Min/Max/Avg to record signal fluctuations
• Free your hands with the optional TPAK magnetic
hanger (Fluke TPAK)
•
•
•
•
to provide optimal protection
and storage
• TL910 Electronic Test Probes
• TL224 SureGrip™ Silicone Test
Leads resist heat
• AC280 SureGrip™ Heavy Duty
Hook Clips
• 80BK Type-K temperature probe
• ToolPak™ meter hanging accessory
to hold meter to steel surfaces
Electrical safety
All inputs are protected to measurement CAT III 1000 V
and CAT IV 600 V. This meter can withstand transient
impulses in excess of 8000 V to help protect you from
arc blasts resulting from surges and spikes.
Features – 175, 177 and 179 DMMs
Feature
179
177
175
Max voltage
1000
1000
1000
•
 •
•
0.09 %
0.09 %
0.15 %
Backlight
 •
•
Min/Max/Avg
 •
•
 •
ToolPak meter hanging kit with magnet
Opt
Opt
Opt
True-rms
Temperature
 •
Basic dc accuracy
179/1AC-II Electrician’s
Multimeter and Voltage
Tester Combo Kit
• 179 True-rms Digital Multimeter
• 1AC-II VoltAlert™ Non-Contact
Voltage Detector
Specifications – 179, 177 and 175 DMMs
Function
Range and resolution
Best accuracy
DC voltage
600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V
± 0.09 % (Models 177 and 179)
± 0.15 % (Model 175)
AC voltage1
600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V
± 1.0 % of reading
DC current
60.00 mA, 400.0 mA, 6.000 A, 10.00 A2
± 1.0 % of reading
AC current2
60.00 mA, 400.0 mA, 6.000 A, 10.00 A2
± 1.5 % of reading
Resistance
600.0 W, 6.000 kW, 60.00 kW, 600.0 kW, 6.000 MW, 50.00 MW
± 0.9 % of reading
Capacitance
1000 nF, 10.00 µF, 100.0 µF, 9999 µF
± 1.2 % of reading
Frequency3
99.99 Hz, 999.9 Hz, 9.999 Hz, 99.99 kHz
± 0.1 % of reading
-40 ºC to +400 ºC (-40 ºF to +752 ºF)
1.0 % of reading
Temperature (Model 179)
1All ac voltage and ac current ranges are specified from 5 % of range to 100 % of range.
210 A continuous, 20 A for up to 30 seconds.
3Voltage frequency is specified from 2 Hz to 100 kHz. Current Frequency is specified from
2 Hz to 30 kHz.
Battery life: 200 hours typical for alkaline. Size (HxWxL): 4.3 cm x 9.0 cm x 18.5 cm (1.7 in x 3.5 in x 7.3 in)
Recommended accessories – 179, 177 and 175 DMMs
• New! C35 lightweight soft case to
provide optimal protection and storage
• AC220 retractable long reach
alligator clips
TP220 sharp 12 mm stainless steel
tip provides reliable contact
• TL224 1.5 m silicone leads resist heat
• ToolPak™ meter hanging accessory
to hold meter to steel surfaces
• 80BK K-type temperature probe
•
Included accessories
Every Fluke 170 Series meter
comes packaged with TL75 test
leads, 9 V battery (installed) and
manual. The Fluke 179 comes with
an 80BK Temperature Probe.
Ordering information
L210
Probe Extender
with light
See page 64
TL220
C510
SureGrip Industrial
Carrying Case
See page 70
Test Lead Set
See page 61
PV350
i400s
Pressure-Vacuum
AC Current Clamp
Module
See page 66
See page 65
For more information and detailed specifications, go to www.fluke.com/dmm
Fluke-179
Digital Multimeter
Fluke-179/1AC-II Electricians
Combo Kit
Fluke-179/EDA2 Electronics
Combo Kit
Fluke-175
Digital Multimeter
Fluke-177
Digital Multimeter
Digital Multimeters
15
Fluke Family of True-rms
Digital Multimeters
Engineered by Fluke for
working professionals
Commercial electricians
HVAC/R technicians
Fluke 117
Fluke 116
voltage detection
• LoZ low impedance
input for safer
troubleshooting
• Resistance, continuity,
frequency and
capacitance
• AC/DC voltage to 600 V,
ac/dc current to 10 A
frequency and
capacitance
• LoZ low impedance
input for safer
troubleshooting
• AC/DC voltage to 600 V,
ac/dc current to 600 μA
• VoltAlert™ non-contact
• Temperature to 400 °C
• Resistance, continuity,
Fluke 112
Fluke 12, 16
Field service technicians
Basic electrical
Fluke 115
Fluke 114
frequency and
capacitance
• AC/DC voltage to 600 V
• AC/DC current to 10 A
input for safer
troubleshooting
• Resistance and
continuity
• AC/DC voltage to 600 V
• Resistance, continuity,
• LoZ low impedance
Fluke 110, 111
Fluke 7-600
Basic features
114
115
116
True-rms readings
ac
ac
ac
117
ac
Basic dc accuracy
0.5 %
0.5 %
0.5 %
0.5 %
Digits
3-1⁄2
3-1⁄2
3-1⁄2
3-1⁄2
Counts
6000
6000
6000
6000
Voltage ac/dc
600 V
 600 V
600 V
 600 V
Current ac/dc
—
10 A
600 µA
10 A
Resistance
40 MW
40 MW
40 MW
40 MW
Frequency
—
50 kHz
50 kHz
50 kHz
Capacitance
—
10 mF
10 mF
10 mF
Temperature
—
—
+400 °C
—
Analog bargraph
•
•
•
•
Large backlit display
•
•
•
•
Min/Max recording
•
•
•
•
Display hold/auto touch hold
•
•
•
•
•
•
Measurements
Display
Data storage and exchange
Other features
Automatic selection, LoZ
VoltAlert, non-contact ac voltage detector
For more information and detailed specifications, go to www.fluke.com/dmm
16
Digital Multimeters
•
•
Fluke 117 and 115 True-rms
Digital Multimeters
Designed for commercial electricians
and field service technicians
Application note, literature code
1260729:
Why true-rms?
If you’re
measuring
non-linear
Why true-rms?
loads like
variable
frequency
drives, solid
state heater
drives, or
electronics,
you need a
true-rms tool
to get accurate
readings.
Average
responding meters will read low,
up to 30 or 40 percent low in some
cases. This application note explains
what true-rms is and when you need
it in your test tool.
Fluke 117
The Fluke 117 is the ideal meter for demanding settings
like commercial buildings, hospitals and schools. The 117
includes integrated non-contact voltage detection to help
get the job done faster.
Non-linear loads need a true-rms
current clamp for accurate readings
Application Note
can usually be separated into
one of three categories:
1. Too much current.
2. Too much heat in the
electrical enclosure.
3. Faulty circuit breaker
(or fuse).
Your first instinct will probably
be to measure the current with
a current clamp while the load
is on. If the current is within
the circuit rating, you may be
tempted to replace the circuit
breaker.
The 117 features include:
• VoltAlert™ Technology for integrated non-contact
voltage detection
• AutoVolt feature for automatic ac/dc voltage selection
• LoZ: low input impedance prevents false readings due
to “ghost voltage”
• Large display and white LED backlight to work in
poorly lit areas more effectively
• Compact design for one-handed operation
• Min/Max/Average to record signal fluctuations
• Compatible with optional magnetic hanger (ToolPak™)
for hands free operation
• Current measurement 20 A (30 seconds momentary;
10 A continuous)
• Resistance, continuity, frequency and capacitance
Figure 1. One current—two readings. Which do you trust? The branch circuit above feeds a
non-linear load with distorted current. The true-rms clamp reads correctly but the average
responding clamp reads low by 32 percent.
Troubleshooting the electrical
service feeding adjustable
speed motor loads can be difficult if you don’t have the right
tools. New solid state motor
drives and heating controls
often conduct non-sinusoidal
(distorted) current. In other
words, the current occurs in
short pulses rather than the
smooth sine wave drawn
by a standard induction motor.
The current wave shape can
have a drastic effect on a
current clamp reading.
Basically, there are two
types of current clamps
commonly available: “average
responding” and “true-rms.”
The average responding units
are widely used and are usually
Figure 2. A computer load.
Non-linear loads that cause
measurement errors.
Introduction
lower cost. They give correct
readings for linear loads such
as standard induction motors,
resistance heaters, and incandescent lights. But when loads
are non-linear, containing
semiconductors, the average
responding meters typically
read low. Worst case nonlinear loads include small
adjustable speed drives (5 hp
or less) connected line to line
across two phases of a 480 V,
three-phase system, solid state
heater controls connected
single phase to 240 V, or
computers connected to 120 V.
When troubleshooting a branch
circuit that suffers from circuit
breaker tripping (or fuse blowing), the cause of the trouble
Figure 3. An adjustable speed motor load.
From the Fluke Digital Library @ www.fluke.com/library
Want to read more? Download this
and other application notes at
www.fluke.com/library
Fluke 115
The new Fluke 115 is the solution for a wide variety of
electrical and electronic testing applications.
The 115 features include:
• Large display and white LED backlight to work in poorly lit areas more effectively
• Compact ergonomic design for
one-handed operation
• Min/Max/Average to record signal
fluctuations
• Resistance, continuity, frequency and capacitance
Features – 117 and 115 DMMs
Feature
117
115
VoltAlert™
•
AutoVolt/LoZ
•
Analog bargraph
•
•
Large backlit digital display
•
•
True-rms for accurate measurements on non-linear loads
•
•
Min/Max recording
•
•
Display hold
•
•
3-1⁄2 digits
•
•
6000 counts
•
•
CAT III 600 V safety rated
•
•
Specifications – 117 and 115 DMMs
Function
Range and resolution
Best accuracy
Volts ac/dc
600 V
0.5 % + 2
Current ac/dc
10 A
1.0 % + 3
40 MW
0.9 % + 2
1 nF to 9,999 µF
1.9 % + 2
5 Hz to 50 kHz
0.1 % + 2
2V
0.9 % + 2
Resistance
Capacitance
Frequency
Diode
Recommended accessories – 117 and 115 DMMs
ToolPak™
Meter Hanger
See page 71
TL220
SureGrip Industrial
Test Lead Set
See page 61
117/322 Electrician’s
Combo Kit
• 117 True-rms digital multimeter
with non-contact voltage detection
New! C115 Deluxe carrying case
with shoulder strap
• 322 Compact clamp meter
• TL75 Hard Point Test Lead Set
• ToolPak Magnetic Meter Hanging
Strap
•
Included accessories
TL75 Test leads, holster, users
manual and 9 V battery (installed).
Ordering information
Fluke-117
Fluke-117/322
Fluke-115
Multimeter with
Non-Contact Voltage
Electrician’s
Combo Kit
Multimeter
C50
Carrying Case
See page 70
For more information and detailed specifications, go to www.fluke.com/dmm
Digital Multimeters
17
Fluke 116 and 114
Digital Multimeters
Designed for HVAC/R technicians
and electrical troubleshooting
Application note, literature code
2434064:
Fossil fuel heating
equipment
Fluke 116
This
Fossil fuel heating
equipment
application
note explains
the basic
principles
of fossil fuel
heating
systems
(gas and oil)
and how to
troubleshoot
them using
thermometers,
DMMs,
clamp meters, pressure/vacuum
modules, and other accessories. The
instructions cover the thermostat
controls, fan controls, flame
verification controls, and cad cell
testing.
The Fluke 116 was specifically designed for the HVAC
professional. It has everything needed in an HVAC meter
including temperature and microamp measurements to
quickly troubleshoot problems with HVAC equipment and
flame sensors.
principles and troubleshooting
techniques
Application Note
This application note was written
to provide you with an understanding of the basic principles of fossil
fuel heating systems and how to
troubleshoot these systems using
thermometers, digital multimeters
(DMMs), clamp meters, pressure/
vacuum modules and other accessories. Heat pumps and forced air
electric heat furnaces are discussed
in other application notes available
from Fluke.
Heating systems
principles
The 116 features include:
• Built in thermometer for HVAC applications
• Microamps to test flame sensors
• Min/Max/Average to record signal fluctuations
• Large white LED backlight to work in poorly lit areas
• Compact ergonomic design for one-handed operation
• Min/Max/Average to record signal fluctuations
• Compatible with optional magnetic hanger (ToolPak™)
• Resistance, continuity, frequency and capacitance
Forced-air heat is generated at
a central furnace and is then
distributed and delivered to the
conditioned space via a duct
system. A properly designed
heating system will generate
quiet, filtered, and comfortable
air into the conditioned zone.
Modern systems have been
recently designed that will also
filter the air electronically, modulate airflow as zone temperatures
change, and bring in fresh outside
air based on occupied time.
There are three types of fossil
fuel heating systems predominantly available on the market
today. These include natural gas,
liquefied petroleum (LP) and fuel
oil forced-air furnaces.
Fossil fuel forced-air
heating
Forced-air fossil fuel furnaces are
factory manufactured, packaged
heating units that include:
• A combustion chamber
designed for gas or oil
DMM with microamps capability testing the flame rectification circuit.
•
•
•
•
A heat exchanger
A flue gas exhaust chamber
A forced air circulating fan
and,
A controller section.
Newer units often include a
secondary heat exchanger to
increase efficiency and an auxiliary fan for combustion gases.
Since the newer units substantially cool the combustion gases,
removing water vapor from the
combustion gases, they often are
called condensing high-efficiency
furnaces. Additionally, they
will have plastic flue gas piping
instead of older more traditional
metal flue pipe since the gas
temperatures are much lower
than less efficient older units.
Older standard gas furnaces
were 65 % to 78 % efficient,
while newer high efficiency
furnaces are 78 % to 85 %
efficient when used with induced
draft fans. Modern condensing
furnaces, however, are 90-95 %
efficient.
Modern fossil fuel furnaces also
come equipped with electronic
controls for ignition, fan speed
control, electronic thermostats,
and safety controls. The typical
operating pressure of the natural
gas furnaces at the burner is
3.5 inches of water column.
Natural gas is predominantly
used as the preferred fuel in
larger cities and communities
where main gas lines are
available. Fuel oil and Liquid
Petroleum (LP) heating furnaces
are more popular in rural
communities.
F ro m t h e F l u k e D i g i t a l L i b r a r y @ w w w. f l u k e . c o m / l i b r a r y
Fluke 114
The new Fluke 114 is the troubleshooting tool for “go/
no-go” testing. It includes a feature to prevent false
readings caused by ghost voltage.
Want to read more? Download this
and other application notes at
www.fluke.com/library
The 114 features include:
• AutoVolt: Automatic ac/dc voltage
selection
• LoZ: Helps prevent false readings due to ghost voltage
• Large white LED backlight to work in poorly lit areas
• Compact ergonomic design for
one-handed operation
• Resistance, continuity, frequency and capacitance
Features – 116 and 114 DMMs
Feature
116
114
Temperature measurements
•
AutoVolt/LoZ
•
•
Analog bargraph
•
•
Large backlit digital display
•
•
True-rms for accurate measurements on non-linear loads
•
•
Min/Max recording
•
•
Display hold
•
•
3-1⁄2 digits
•
•
6000 counts
•
•
CAT III 600 V safety rated
•
•
Function
Range and resolution
Best accuracy
Volts ac/dc
600 V
0.5 % + 2
Current ac/dc
10 A
1.0 % + 3
+400 °C
1.0 % + 18
Resistance
Capacitance (116 only)
Frequency (116 only)
Diode (116 only)
50 kHz
0.9 % + 2
1 nF to 9,999 µF
1.9 % + 2
5 Hz to 50 kHz
0.1 % + 2
2V
0.9 % + 2
Recommended accessories – 116 Digital Multimeter
80AK
80PK-24
80PK-8
DMM Adapter
SureGrip Air Temperature Probe Pipe Clamp Temperature Probe
See page 69
See page 68
See page 68
Digital Multimeters
•
•
•
Temperature and Microamps
Fluke 62 Infrared Thermometer
TL75 Hard Point Test Lead Set
ToolPak™ Magnetic Meter
Hanging Strap
New! C115 Deluxe carrying case
with shoulder strap
New! 80PK-11 Pipe Wrap
Thermocouple
Fluke 80AK Thermocouple Adapter
Fluke 80BK B-Type Integrated
Temperature Probe
Included accessories
TL75 Test Leads, 80BK Integrated
Temperature Probe (116 only),
holster, users manual and 9 V
battery (installed).
Ordering information
80BK
Integrated DMM Temperature Probe
ships with 116
See page 68
For more information and detailed specifications, go to www.fluke.com/dmm
18
•
•
•
•
Specifications – 116 and 114 DMMs
Temperature (116 only)
116/62 HVAC Combo Kit
• Fluke 116 HVAC Multimeter with
Fluke-116
Fluke-116/62
Fluke-114
HVAC Multimeter
with Temperature
and Microamps
HVAC Combo Kit
Electrical Multimeter
Fluke 77-IV
Digital Multimeter
Versatile meters for field service
or bench repair
The new 77-4 digital multimeter has the features needed
to repair most electrical and electronic problems. This
meter is simple to use and has significant improvements
over Fluke’s original 70 Series with more measurement
functions, conformance to the latest safety standards, and
a much larger display that’s easier to view.
Measures
• Wide 1000 V measurement range
• Average responding ac measurements
• 0.3 % accuracy
• 10 Amps continuous
• Frequency and capacitance
• Resistance and continuity
Features
• Large display
• Backlight for work in dim areas
• Min / Max to record signal fluctuations
• Integral holster with probe holders
• Free your hands with the optional TPAK magnetic
hanger
• Auto and Manual ranging
Made
in the
U.S.A.
Fluke 27 waterproof
multimeter
Completely
sealed for extreme
conditions
Designed for U.S.
military, mining and
other extreme applications. A special
case with o-rings
prevents water from
entering the input
jacks, switches and
fuse door. Meets
military specifications for vibration,
shock and water
resistance.
• Waterproof design
with rugged, o-ring
sealer case protects
rotary switch, input
jacks, battery and
fuse door
• Operates from -15 °C
to +55 °C (5 °F to
131 °F) and 95 %
relative humidity
Fluke 73-III
Features – 77-IV Digital Multimeter
Feature
Old 77
New 77-IV
Accuracy
0.3 %
0.3 %
True-rms
No
No
Same familiar readings
Frequency
No
Yes
Built in frequency counter
Capacitance
No
Yes
Test components
Maximum ac voltage
750
1000
Min/Max/Average
No
Yes
Capture transients automatically
Display backlight
No
Yes
Usable in dim areas
Battery door
No
Yes
Fast battery changes
Probe holders
No
Yes
One-hand operation
Not rated
600 V CAT IV
No
Yes
Overvoltage category safety rating
Optional magnet hanger
Benefit
Same great accuracy
Wider measurement range
Higher level of protection
Position meter in best location
The Fluke 73-III product
represents one of the best
selling multimeter designs
of all time. It’s classic
simplicity combined with
attractive feature set make
this meter the perfect
choice for electronic and
automotive applications.
The 73-III features
include:
• Average responding
• Measures both amps and milliamps
• Removable high impact holster
• Manual or autoranging
Specifications – 77-IV Digital Multimeter
Function
Range
Best accuracy
Best resolution
V dc
600.0 mV to 1000 V
± (0.3 % + 1)
0.1 mV
V ac
6.000 V to 1000 V
± (2.0 % + 2)
1.0 mV
A dc
60.00 mA to 10 A
± (1.5 % + 2)
0.01mA
A ac
60.00 mA to 10 A
± (2.5 % + 2)
0.01 mA
Resistance
600.0 Ω to 50 MΩ
± (0.5 % + 1)
0.1 Ω
1 nF to 9,999 µF
± (1.2 % + 2)
1 nF
99.99 Hz to 99.99 kHz
± (0.1 % + 1)
0.01 Hz
Capacitance
Frequency
Recommended accessories – 77-IV Digital Multimeter
Fluke 77-IV
included accessories
TL75 test leads, 9 V battery
(installed) and manual.
Fluke 27
included accessories
TL75 test leads, alligator clips, 9 V
battery (installed) and manual.
Ordering information
Fluke-77-4
Digital Multimeter
Fluke-73-3
Digital Multimeter
Fluke-27-YEL Multimeter
i400s
C35
AC Current Clamp
Meter Case
See page 66
ToolPak™
Meter Hanger
See page 71
For more information and detailed specifications, go to www.fluke.com/dmm
Digital Multimeters
19
Complete automotive
diagnostic tools
Tools designed to help
you beat the book
Application note, literature code
1547394:
Beat the book
This amazing reference covers test
procedures commonly used by
experienced automotive technicians.
Covers basic troubleshooting
techniques and measurements using
a DMM and
describes
Beat the Book
tests for the
charging
system,
starting
system, fuel
and air system,
ignition
system, and
the body
electric/engine
management/
cooling system.
Fluke 88V Automotive Multimeter
The Fluke 88V Automotive Multimeter is designed
to help automotive professionals beat the book.
This DMM has more measurement functions, troubleshooting features and accuracy to solve virtually
any problems on conventional and hybrid vehicles.
• Automotive test functions include dc and ac voltage, resistance and current
• Min/Max recording for logging the highest and
lowest readings over time
• Frequency measurements for magnetic sensors
and ac/dc frequency signals
• Duty Cycle for variable duty cycle signals with
selectable trigger slope and level
• Pulse width for fuel injector on time measurements
• Conductance testing for secondary ignition coils
• RPM measurements for DIS and
conventional ignition systems
• Built-in thermometer
Automotive electrical diagnosis.
Better diagnosis, faster repair.
Application Note
Work safely
This application note is intended
as a guide for the professional
mechanic. It describes some of
the test procedures commonly
used by experienced technicians.
However, some of the procedures
require you to take certain precautions to avoid personal injury
and/or damage to equipment or
vehicles. Fluke cannot anticipate
all possible precautions that you
must take on all the different
vehicles for which this guide is
applicable. For this reason, you
should thoroughly familiarize
yourself with proper safety
habits and take all precautions
described in the vehicle’s
repair manuals to avoid injury
or damage.
Testing automotive
systems with an
analog/digital multimeter
Perhaps the most important tool
you’ll use in troubleshooting auto
electrical systems is the multimeter. The basic multimeter
measures voltage, current and
resistance, while more elaborate
multimeters, such as the new
Fluke 88-V, have features that
can check things such as
frequency, duty cycle, pulse
width, make diode tests, and
even measure temperature.
In this application note you
will find troubleshooting techniques using the high quality,
affordable and popular line of
Fluke analog/digital multimeters
and automotive troubleshooting
accessories. Fluke’s analog/
digital combination has distinct
advantages over either digital
or analog meters alone, and
the accessories are designed to
make your job easier and more
profitable.
Although automotive multimeters with various capabilities
have been around for years,
many of them didn’t have the
scales and functions required for
todays’ automotive applications.
Hybrid, electric and fuel cell
powered vehicles have special
requirements, ones met with the
new 88-V. Now that computers
and their sensors are a part of
everyday automobile troubleshooting, you need a true
multimeter to do the job.
The common analog type multimeter is not only inadequate, it
can damage delicate computer
circuitry. Both analog meters and
test lights, due to their low internal resistance (input impedance),
draw too much power from the
device they’re testing to be used
on computers. What’s more,
many analog meters use 9V to
power the resistance test, which
is enough to destroy sensitive
digital components.
From the Fluke Digital Library @ www.fluke.com/library
Want to read more? Download this
and other application notes at
www.fluke.com/library
Fluke 73-III (see pg 19 for details)
• Simple interface for
one-handed operation
• Current measurement (A and mA)
• Auto or manual ranging
Features – 88V and 73 DMMs
Feature
88V
73
Digital display with analog bargraph
•
•
Continuity for detecting opens and shorts
•
•
Diode test for alternator testing
•
•
Peak Min/Max captures intermittence as fast as 250 microseconds
•
Min/Max average to monitor trends in oxygen sensor values for fuel trim
•
Pulse width for fuel injector on time measurements
•
Milliamp ranges to find low current parasitic drains
•
Lo-Ohms (.01 W) for low resistance sensor and coil measurements
•
Duty cycle for pulse width modulated signals
•
RPM for ignition systems
•
Temperature for coolant and air temperature sensors
•
•
•
Dwell for points and feedback carburetors
Limited lifetime warranty
•
For the complete diagnostics
package and maximum value,
pick up the 88V/A combo kit.
• Includes Fluke 88 Series V
•
Buy accessory kits and save
•
•
•
•
•
•
•
Automotive Multimeter
TL224 Heat Resistant Silicone
Test Leads
TP220 Removable Sharp Point
Test Probes
AC285 Large Jaw Alligator Clips
TPAK Magnetic Hanger
80BK Temperature Probe
RPM80 Inductive Pick-up
Automotive Backprobe Pins
Insulation Piercing Probe
Packaged in a durable carrying case
(C800)
Fluke 88V
included accessories
TLK281
Automotive Test Lead Kit
See page 61
TLK282
Deluxe Automotive Test Lead Kit
See page 61
TL28A
TL82
Automotive Test Lead Set Automotive Pin & Socket Adapter Set
See page 62
See page 63
Recommended automotive accessories – 88V DMM
TP81 or TP82
Insulation
Piercing Probes
See page 63
TP84
Oxygen Sensor Insulation
Piercing Probe
See page 63
TP88
Rigid Backprobe
Pin Set
See page 63
Ordering information
TP40
Automotive Back
Probe Pin Set
See page 63
For more information and detailed specifications, go to www.fluke.com/dmm
20
Digital Multimeters
Test leads, 9 V battery (installed),
RPM pickup, carrying case and
users manual.
Fluke-88-5
Automotive
Multimeter
Fluke-88-5/A KIT Automotive
Multimeter
Combo Kit
Fluke-73-3
Digital Multimeter
Fluke 8845A and 8846A
6.5 Digit Precision Multimeters
Precision and versatility for
bench or systems applications
The Fluke 8845A and 8846A, 6.5 digit precision
multimeters have the precision and versatility to
handle your most demanding measurements on the
bench or in a system.
Dual display offers versatile graphical
capabilities: The 8845A and 8846A feature a unique
graphical display that can reveal signal quality
issues like drift, intermittent and stability by viewing
the measurement data as a real time TrendPlot,™
Histogram or Statistics using the unique analyze
mode.
Wide measurement ranges: Resistance or
current has been extended to cover the widest range
possible.
Perform 4-wire measurements easily with
two leads: Patented split terminal jacks for 2x4
ohms function allow you to perform precise 4-wire
measurements with only two leads instead of four.
Optional Kelvin leads accessories are available to
enable you to establish a 4-wire connection even in
tight spaces.
Systems capabilities: Both instruments include
an RS-232, IEEE-488 and Ethernet interface as
standard, with popular DMM emulation modes that
make systems integration a simple task.
Software: Transfer data points from your meter to
your PC with the free copy of FlukeView Forms Basic.
To customize your forms, upgrade with FVF-UG.
Fluke 8845A
Fluke 8846A
Application note, literature code
2547797:
Understanding specifications
for precision multimeters
A solid understanding of
specifications
is critical
when you’re
evaluating the
suitability of
DMMs for an
application,
or when
you must be
confident that
your readings
accurately
reflect
reality. This
application
note discusses some of the thinking
behind DMM specifications and
spec sheets. It defines the various
elements of DMM specs and gives
tips on how to apply them.
5NDERSTANDINGSPECIlCATIONS
FORPRECISIONMULTIMETERS
!PPLICATION.OTE
$IGITALMULTIMETERSARETHEWORKHORSESOFTHE
ELECTRONICSINDUSTRY!LMOSTALLOFTHEELECTRONIC
PRODUCTSWEUSEINOURPERSONALANDPROFESSIONAL
LIVESAREBUILTORSERVICEDUSINGMULTIMETERS
$IFFERENT$--APPLICATIONSREQUIREDIFFER
ENTDEGREESOFATTENTIONTOSPECS!TECHNICIAN
CHECKINGALOGICPOWERSUPPLYCANUSEHISTRUSTY
BENCH$--CONlDENTLYTOVERIFYTHATTHESUPPLY
ISWITHINAFEWPERCENTOF6(OWEVER WHEN
THEJOBREQUIRESTESTINGCRITICALCIRCUITS CHECKING
PRECISIONCOMPONENTS MAKINGlNEADJUSTMENTS
INPRODUCTION VERIFYINGCOMPLIANCEWITHINDUSTRY
STANDARDS ORTAKINGMEASUREMENTSOUTSIDETHE
CONTROLLEDENVIRONMENTOFTHELAB THENYOULLNEED
TOEVALUATESPECIlCATIONSCAREFULLY
!SOLIDUNDERSTANDINGOFSPECIlCATIONSISCRITICAL
WHENYOUREEVALUATINGTHESUITABILITYOF$--S
FORANAPPLICATION ORWHENYOUMUSTBECONlDENT
THATYOURREADINGSACCURATELYREmECTREALITY4HIS
APPLICATIONNOTEDISCUSSESSOMEOFTHETHINKING
BEHIND$--SPECIlCATIONSANDSPECSHEETS)T
DElNESTHEVARIOUSELEMENTSOF$--SPECSAND
GIVESTIPSONHOWTOAPPLYTHEM
3PECIlCATIONSANDTHE
SPECSHEET
&ROMTHISFORMALDElNITIONWE
CANDRAWTHECHARACTERISTICSOF
GOODSPECIlCATIONS
7HENEVERWETAKEAMEASURE
s #OMPLETENESSnANYFACTOR
MENTWITHANYMETER WERE
THATIMPACTSUNCERTAINTYIS
GAMBLING7EREGAMBLINGTHAT
COVERED INCLUDINGOPERAT
THEINSTRUMENTISGOINGTOGIVEUS
INGLIMITSSUCHASHUMIDITY
THEhREALvREADING&ORTUNATELY
ALTITUDE ORVIBRATION
ITSAVERYSAFEBETTHATAQUALITY
s #LARITYnALLEFFORTSSHOULDBE
MULTIMETERWILLDELIVERREADINGS
MADETOMAKETHESPECIlCA
THATCOINCIDEWITHREALITY3PECIl
TIONSSTRAIGHTFORWARD
CATIONSQUANTIFYTHECONlDENCEOF /BJECTIVITYnDOESNOTATTEMPT
s
GETTINGACCURATEREADINGSANDTHE
TOMISLEADFORTHESAKEOF
RISKOFSEEINGINACCURATEREADINGS
PROMOTION
!SPECIlCATIONSDOCUMENTIS
ACLEARLYWRITTENDESCRIPTIONOF !WELL
WRITTENSPECIlCATION
SHOULDMAINTAINTHESAMELEVEL
ANINSTRUMENTSPERFORMANCE
OFINTEGRITYASAMEDICALCHARTOR
)TSHOULDQUANTIFYANINSTRU
BANKSTATEMENT-ANUFACTURERS
MENTSCAPABILITIESOBJECTIVELY
UNDERWELL
DElNEDOPERATING
CONDITIONS
MUSTSTANDlRMLYBEHINDTHEIR
SPECSANDYOUSHOULDFULLYEXPECT
THATTHEINFORMATIONYOUARE
GETTINGISACCURATEANDCOMPLETE
/NTHESPECSHEET YOUSHOULD
SEEMEASUREMENTUNCERTAINTY
SPECSANDMODIlERSTHATAFFECT
THEUNCERTAINTY9OUWILLALSOSEE
OPERATINGLIMITSTHATCONSTRAIN
THEENVIRONMENTINWHICHTHE
UNCERTAINTYSPECIlCATIONSWILL
HOLDTRUE4HESEARESTATEDIN
NUMERICALVALUESEGHUMIDITY
ORWITHREFERENCETOINTERNATIONAL
STANDARDSSHOCKANDVIBRATION
&IRSTLETSTAKEACLOSERLOOKAT
HOWWEQUANTIFYMEASUREMENT
UNCERTAINTY
À Ê Ì
i Ê Õ i Ê } Ì > Ê L À > À Þ Ê J Ê Ü Ü Ü° v Õ i ° V É L À > À Þ
Want to read more? Go to www.
fluke.com/library to download this
and other application notes, or get
info specific to your industry and
sign up for Fluke News publications
at www.fluke.com/subscribe.
Features – 8845A and 8846A
Feature
8845A
8846A
Display
Dual VFD Dot Matrix
Resolution
6.5 Digits
Continuity / Diode Test
Use the built-in TrendPlot paperless chart recorder
to graphically identify the extent of drift and intermittent events in analog circuits.
Yes
Analytical Functions
Statistics, Histogram, TrendPlot™, Limit Test
Math Functions
Zero, Min/Max/Average, Std Dev; mx + b, dB/dBm
USB Device Port
—
USB memory drive port
Real Time Clock
—
Yes
Interfaces
RS-232, IEEE-488.2, Ethernet, USB (with optional adapter)
Programming Languages/Emulation Modes
Safety
SCPI (IEEE-488.2), Agilent 34401A, Fluke 45
Designed to comply with IEC 61010-2000-1, ANSI / ISA-S82.01-1994,
CAN / CSA-C22.2 No.1010.1-92 1000 V CAT I / 600 V CATII
View results in Histogram mode to reveal stability
or noise problems in analog circuits.
Specifications – 8845A and 8846A
8845A
8846A
Function*
Range
Resolution
Accuracy* (%)
Range
Resolution
Accuracy* (%)
Voltage dc
1000 V
100 nV
0.0035
1000 V
100 nV
0.0024
Voltage ac (freq. 300 Hz)
750 V
100 nV
0.06
1000 V
100 nV
0.06
100 MΩ
100 µΩ
0.01
1 GΩ
10 µΩ
0.01
Current dc
10 A
100 pA
0.05
10 A
100 pA
0.05
Current ac (freq. 3 Hz to 10 kHz)
10 A
1 µA
0.10
10 A
10 nA
0.10
Freq/period
300 kHz
1 µHz
0.01
1 MHz
1 µHz
0.01
Capacitance
—
—
—
1 nF to 0.1 F
1 pF
1
—
—
—
-200 °C to
+600 °C
0.001°
0.06°
Resistance (2x4 wire)
Temperature RTD
*Accuracy = ± (% of reading)
Size (HxWxD): 88 mm x 217 mm x 297 mm (3.45 in x 8.54 in x 11.69 in) Weight:3.6 kg (7.9 lb) One-year warranty
Recommended accessories – 8845A and 8846A Precision Multimeters
Handle even the most demanding measurements
with high accuracy and 6.5 digit resolution.
Included accessories
LCI Line Power Cord, TL71 Test
Lead Set, Spare Line Power fuse,
Programmers Manual/User Manual
on CD-ROM, FVF-BASIC FlukeView
Forms Software Basic Version.
Ordering information
TL2X4W-PT
2x4 Wire Ohms Test Lead
2 mm probe tip
TL2X4W-TWE
884X-512M
2x4 Wire Ohms
USB Memory 512M
Tweezer
FVF-UG
FlukeView Forms
Software Upgrade
Fluke-8845A 6.5 Digit Precision
Multimeter, 35 ppm
Fluke-8846A 6.5 Digit Precision
Multimeter, 24 ppm
For more information and detailed specifications, go to www.fluke.com/884X
Digital Multimeters
21
Fluke T5 and T3
Electrical Testers
Alternatives to traditional
solenoid testers
Fluke T5 Voltage, Continuity and
Current Tester
• Excellent front-line troubleshooting and
measurement tool
Available in 600 V and 1000 V models
Digital display
OpenJaw™ current measurement
Rotary switch selects volts, amps and ohms
functions
• Heavy-duty test leads
•
•
•
•
Fluke T3 Voltage and Continuity Tester
• LED voltage indicators
• Seven key voltage levels
• Automatically switches to continuity beeper or
•
Fluke
9040
Rotary Field
Indicator
The Fluke 9040 is
a premium phase
rotation tester with
a CAT III, 600 V rating. The frequency
range is from 15 Hz
to 400 Hz for
demanding applications. The clear
liquid crystal display and the holster
make it suitable for rough outdoor
applications. This instrument is supplied with three unique, expandable,
test probes which fit most sockets.
For more information, visit
www.fluke.com/9040
ac/dc voltage
Heavy-duty test leads
Fluke
1AC-II/1LAC-II
VoltAlert
Specifications – T5 and T3 Testers
T5-1000
T5-600
T3
Measure dc voltage
1000 V
600 V
Preset 6 V, 12 V, 24 V,
36 V, 48 V, 110 V and
220 V*
Measure ac voltage
1000 V
600 V
Preset 24 V, 48 V, 120
V, 208 V, 240 V, 277 V
and 480 V*
Measure ac current (average)
100 A
100 A
N/A
Measure continuity
< 25 W
< 25 W
< 20,000 W
Measure resistance
N/A
1000 W
1000 W
DC polarity indicator
Yes
Yes
Yes
Detachable probe tips with
optional probe tips styles
Yes
Yes
N/A
1000 V Overvoltage
CAT III
600 V Overvoltage
CAT III
1000 V Overvoltage
CAT III
Two-years
Two-years
One-year
Safety rating
Warranty
* Voltage levels will vary depending on country of intended use.
The pocket-sized voltage detector
The next generation VoltAlert™ ac
non-contact voltage testers from
Fluke are easy to use—just touch
the tip to a terminal strip, outlet, or
supply cord. When the tip glows
red and the unit beeps, you know
there is voltage present. Electricians,
maintenance, service, safety personnel
and homeowners can quickly test for
energized circuits in the workplace or
at home. Certified up to CAT IV 1000 V.
Two models to choose from:
• 1AC-II – detects voltage from
90 V ac to 1000 V ac
• 1LAC-II – detects voltage from
20 V ac to 90 V ac
Included accessories
The T5-1000 and T5-600 come with
detachable probes and instruction
sheet. The T3 has fixed test leads
and probes.
Buy Electrical Tester Kits and Save
Ordering information
T3 Tester Kit
Combo kit includes:
• Fluke T3 Voltage and
Continuity Tester
• Fluke VoltAlert™
T5-1000 Tester Kit
Combo kit includes:
• Fluke T5-1000 Voltage
Electrical Tester
• Fluke VoltAlert™
• Fluke H5 Holster
VoltAlert™ Multi Pack
Includes five Fluke VoltAlerts.
The special kit pricing gets you
the fifth VoltAlert™ free. Outfit
your entire staff.
Recommended accessories – Electrical Testers
H5
Electrical Tester Holster
See page 70
AC285 (T5)
SureGrip™ Alligator Clips
See page 62
Meter Cleaner
Cleaning Wipes
See page 71
T5 Kit
Starter Kit
See page 61
For more information and detailed specifications, go to www.fluke.com/tseries
22
Electrical Testers
C520A
Leather Tool Case
See page 70
T5-1000
1000 V Voltage,
Continuity and
Current Tester
T5-600
600 V Voltage,
Continuity and
Current Tester
T3
Voltage and Continuity
Tester
T3-1AC Kit Voltage and Continuity
Tester Kit
T5-H5-1AC Voltage, Continuity
Kit
and Current Tester Kit
1AC-II 5PK VoltAlert 5 Pack
1AC-II
Voltage Detector
1LAC-II
Voltage Detector
9040
Rotary Field Indicator
Fluke 1625 and 1623
Geo Earth Ground Testers
Advanced technology for all your earth
ground testing applications
The new Fluke 1620 Series Earth Ground
Testers not only measure ground resistance
using the classic ‘fall of potential test’
but also enable time saving testing using
the ‘selective’ and ‘stakeless’ methods.
‘Selective’ testing does not require the
electrode under test to be disconnected
during the measurement, thus increasing
safety. The simple ‘stakeless’ method
quickly checks ground connections using
two current transformers (probes) clamped
around the ground conductor under test.
Offering ‘one-button’ simplicity, the 1623
is an all-in-one earth ground tester, while
the 1625 has extra versatility for more
demanding applications.
Fluke 1623
Earth ground resistance and soil
resistivity should be measured when:
• Designing earth ground systems
• Installing new ground system and
electrical equipment
• Periodically testing ground and lightning
protection systems
• Installing large electrical equipment
such as transformers, switchgears,
machines, etc.
Brochure, literature code 2633834:
Earth Ground Resistance:
Principles, testing methods
and applications
This brochure
is a highly
informative
collection of
information
about Earth
Ground
Systems,
testing
methods and
applications.
Principles,
testing methods
and applications
Diagnose intermittent
electrical problems
Avoid unnecessary
downtime
Learn earth ground
safety principles
Want to
Earth Ground
Resistance
read more?
Download
this and other application notes at
www.fluke.com/library
The 1623 is perfect for performing
predictive maintenance checks of
commercial and industrial applications.
The 1625 is intended for electrical utility or
other high frequency environments.
Fluke 1625
Features – 1625/1623 Earth Ground Testers
Feature
1625
3- and 4-pole earth ground measurement
•
•
4-Pole soil resistivity testing
•
•
2-Pole resistance measurement ac
•
•
2-and 4-pole resistance measurement dc
•
Selective testing, no disconnection of ground conductor (1 clamp)
•
•
Stakeless testing, quick ground loop testing (2 clamps)
•
•
Measuring frequency 128 Hz
•
Earth impedance measurement at 55 Hz
•
Automatic frequency control (AFC) (94 Hz to 128 Hz)
•
Measuring voltage switchable 20/48V
•
Programmable limits, settings
•
Continuity with buzzer
•
Dust/water resistance
IP56
IP56
CAT II 300 V
CAT II 300 V
Safety rating
Battery type: 6 x AA alkaline cells
Size (HxWxD): 110 mm x 180 mm x 240 mm (4.33 in x 7.08 in x 9.45 in)
Weight (including batteries): 1623 Geo: 1.1 kg (2.42 lb); 1625 Geo: 1.5 kg (3.31 lb)
Two-year warranty
EI-1623
Selective/stakeless
clamp set
for 1623
EI-1625
Selective/stakeless
clamp set
for 1625
ES-162P3
Stake/reel set
for 3 pole
measurements
Included accessories
Fluke 1625 Tester: 2 test leads,
2 alligator clips, and users manual.
Fluke 1625 Kit: Same as above
plus stake/reel set 4 pole, selective/
stakeless clamp set, and rugged
carrying case.
Fluke 1623 Tester: 2 test leads,
2 alligator clips, and users manual.
Fluke 1623 Kit: Same as above
plus stake/reel set 4 pole, selective/
stakeless clamp set, and rugged
carrying case.
Ordering information
Recommended accessories – 1625 and 1623 Earth Ground Testers
1623
•
One-button measurement concept
ES-162P4
Stake/reel set
for 4 pole
measurements
Fluke-1625 Advanced GEO
Earth Ground Tester
Fluke-1625 Kit Advanced GEO
Earth Ground
Tester Kit
Fluke-1623 Basic GEO Earth
Ground Tester
Fluke-1623 Kit Basic GEO Earth
Ground Tester Kit
These products are for unpowered
installations measuring grounding
connections.
For more information and detailed specifications, go to www.fluke.com/egt
Earth Ground Testers
23
Fluke 1630 Earth
Ground Clamp Meter
Measure earth ground loop resistance
anywhere. Quickly and easily.
The Fluke 1630 Earth Ground Clamp is able to measure
ground loop resistances—using the Stakeless testing method.
This test technique eliminates the dangerous, and time
consuming activity of disconnecting parallel grounds, as
well as the process of finding suitable locations for auxiliary
ground stakes. You can also perform earth ground tests in
places you have not considered before: inside buildings, on
power pylons or anywhere you don’t have access to soil.
With the Stakeless testing method, the Fluke 1630 Earth
Ground clamp is placed around the earth ground rod or
the connecting cable. No earth ground stakes are used at
all. A known voltage is induced by one half of the clamp
and the current is measured by the other half. The tester
automatically determines the ground loop resistance at this
grounding connection. Gone are the days of spending time
placing and connecting stakes for each earth ground rod on
your system—a major time saver.
• Quick and easy use—no earth ground stakes are
necessary
• Large, 35 mm (1.35 in) jaw opening
• Measures ground resistance from 0.025 Ω to 1500 Ω
• Measures ground leakage current from 0.2 mA to 30 mA
• High and Low alarming
• Automatic self calibration
• Rugged carrying case and resistance check loop included
What is ground, and what
does it do?
The NEC, National Electrical Code,
defines a ground as a “conducting
connection, whether intentional or
accidental between an electrical
circuit or equipment and the earth, or
to some conducting body that serves
in place of the earth.”
When talking about grounding
it is actually two different subjects,
earth grounding and equipment
grounding. Earth grounding is an
intentional connection from a circuit
conductor usually the neutral to a
ground electrode placed in the earth.
Equipment grounding is to ensure
that operating equipment within a
structure is properly grounded.
These two grounding systems
are required to be separate except
for a connection between the two
systems to prevent differences in
potential from a possible flashover
from a lightning strike. The purpose
of a ground besides the protection
of people, plants and equipment
is to provide a safe path for the
dissipation of fault currents, lightning
strikes, static discharges, EMI and
RFI signals and interference.
Handy GEO Earth Ground Tester
Earth ground tester for resistance measurement
The Handy GEO Earth Ground Tester is a rugged,
easy-to-use tester for three-pole ground resistance
measurements and two-pole ac resistance
measurements.
Earth ground resistance is measured by installing
earth ground test electrodes and testing with the
Handy GEO. Earth ground resistance measurements
are used to ensure safe operation and reduce power
quality problems. The Handy GEO is extremely
lightweight making it ideal to test for lightning
protection levels and periodic check-ups during
routine maintenance.
Two-pole ac resistance is measured to confirm low
resistance between electrical joints:
• Fuse-to-fuse holder (to ensure there is no
overheating)
• Bonding of ground earth connections
• Additional bonding
• Cable to terminal connections
AC current can be used to confirm the low resistance
path in two directions simultaneously.
The gold standard for measuring ground resistance
using classic fall of potential as well as selective and
stakeless methods.
Included accessories
Fluke 1630 Clamp Meter: Rugged
carrying case with belt, resistance
test loop, 9 V battery and users
manual.
Handy GEO Tester: Rugged rubber
holster with carrying belt, battery,
and operating instructions.
Ordering information
Fluke-1630
Handy GEO
Handy GEO Kit
Earth Ground
Clamp Meter
Earth Ground Tester
Earth Ground Tester
Kit with 25 m and
50 m cable reel
and two earth
ground stakes
These products are for unpowered
installations measuring grounding
connections.
For more information and detailed specifications, go to www.fluke.com/egt
24
Earth Ground Testers
Fluke 430 Series Three-Phase
Power Quality Analyzers
Pinpoint power problems faster,
safer and in greater detail
Fluke 435
Fluke 434
The Fluke 435 and 434 Three-Phase Power Quality
Analyzers help you locate, predict, prevent and troubleshoot problems in three- and single-phase power distribution systems. Troubleshooting is faster with on-screen
display of trends and captured events, even while background recording continues. The new IEC standards for
flicker, harmonics, and power quality are built right in to
take the guess work out of power quality.
• Troubleshoot real-time:
Analyze the trends
using the cursors and
zoom tools—even while
background recording
continues
• AutoTrend: Every
measurement you see
is always automatically
recorded, without any setup
• Automatic Transient
Mode: Capture 200 kHz
waveform data on all
phases simultaneously
up to 6 kV
• Measure all three
phases and neutral:
With included four
current probes
• Fully Class-A compliant: Conduct tests according to
the stringent international IEC 61000-4-30 Class-A
standard
• System-Monitor: Up
to ten power quality
parameters on one screen
according to EN50160
power quality standard
• Inrush mode: For
troubleshooting nuisance
circuit breaker tripping
• Logger function:
Configure for any test condition with memory for over
400 parameters at user defined intervals
pplication note, literature code
A
2435490:
Six simple ways to reduce
costs with a Fluke 434
Power Quality Analyzer
There are
hundreds of
power quality
measurements
you can take
on electrical
systems and
equipment.
These
instructions
focus on four
predictive
maintenance
(PdM)
measurements and two power
consumption measurements that
can help you uncover hidden costs,
protect equipment from damaging
conditions, reduce unscheduled
downtime, and improve system
performance.
Features – 435 and 434 PQ Analyzers
Features
435
434*
Measures voltage, current, dips, swells,
interruptions, harmonics, inter-harmonics,
flicker, power, energy, transients, frequency,
unbalance, inrush, EN50160 overview
•
•
Logger function with multi-parameter logging
•
optional*
Mains signaling
•
optional*
Memory size
16 MB
8 MB
Current probes
3000 A flexible (4)
40 A/400 A clamp (4)
Carrying case
water-tight hard case with rollers
rugged hard case
Software
Fluke Power Log and FlukeView®
FlukeView®
*Optional functionality can be added with upgrade kit.
Recommended accessories – 435 and 434 PQ Analyzers
Included accessories
Fluke 435 Analyzer: Hard carrying case with rollers, four flexible
current probes (i430-flex), five test
leads and clips, battery charger,
FlukeView software, Power Log software, optical USB cable, color localization set, getting started manual,
users manual on CD-ROM.
Fluke 434 Analyzer: Hard carrying
case, four current probes (i400s),
five test leads and clips, battery
charger, FlukeView software, optical USB cable, color localization set,
getting started manual, users manual
on CD-ROM.
Ordering information
I5sPQ3
3 pack of 5 A
precision current
clamps
i430-flex-4pk
C435
4 pack of 3000 A
Water-tight hard
flexible current
case with rollers
probes
GPS430
GPS time
synchronization
module
For more information and detailed specifications, go to www.fluke.com/pq
Fluke-435 Three-Phase Power
Quality Analyzer
Fluke-434 Three-Phase Power
Quality Analyzer
Power Quality Analyzers
25
Fluke 43B Power
Quality Analyzer
Power quality analysis plus a
scope and a meter
Application note, literature code
2391563:
The costs of poor power
quality
The Fluke 43B Power Quality Analyzer performs the
measurements you need to maintain power systems,
troubleshoot power problems, and diagnose equipment
failures. The 43B has 20 storage locations and can store
data as well as screens.
•
•
•
•
•
•
•
Productivity
is the key to
survival in
today’s global
competitive
environment.
Power quality
problems
can cause
processes and
equipment to
malfunction
or shut down.
And the consequences can range
from excessive energy costs to
complete work stoppage. Obviously,
power quality is critical.
To reduce your power bill, you
need to record consumption patterns
and adjust the system and load
timing to reduce one or more of the
following:
1. Actual power (kWh) usage
2. Power factor penalties
3. A peak demand charge structure
NiMH battery provides
extended operating time of
6.5 hours
Voltage, current and power
harmonics up to 51st
Total harmonic distortion
(THD)
Phase angle of individual
harmonics
FlukeView® software with
enhanced analysis and
documentation capabilities
Continuously measure volts
and amps cycle-by-cycle for
up to 16 days
Cursors give time and date
of sags and swells
Want to read more? Download this
and other application notes at
www.fluke.com/library
Specifications – 43B Analyzer
Function
•
Fluke 43B*
Volts/Amps/Hz
Volts rms
± (1 % + 10 counts)
Amps rms
± (1 % + 10 counts)
Frequency (Hz)
± (0.5 % + 2 counts)
Crest Factor (CF)
± (5 % + 1 count)
Sags and swells
± (2 % +10 counts)
Power
W, VAR, VA
PF, Cos ( (DPF)
± (2 % + 6 counts)
± 0.04
Harmonics and THD
Harmonics
±3%
THD
± 3%
Transient display
Minimum transient detection
Inrush current
40 ns
± 5 % of full scale
Additional capabilities
AutoTrend
•
Real time scope
•
Ohms, diode, continuity, capacitance
Memory (screens/data)
FlukeView software and interface cable
•
20 (screens, settings, data)
Standard
Battery life: Rechargeable NiMH pack
(charger included), 6.5 hours typical
(continuous)
Shock and vibration: Mil 28800E,
Type 3, Class III, Style B
Operating temperature: 0 ºC to 50 ºC
(32 ºF to 122 ºF)
Case: IP51 (dust, drip waterproof)
Size (HxWxD): 232 mm x 115 mm x
50 mm (9.1 in x 4.5 in x 2 in)
Weight: 1.1 kg (2.5 lbs)
Safety: IEC 1010-1, CAT III 600 V.
Tested and approved to UL 3111-1,
CSA C.22.2 No. 1010.1-92.
Warranty: Three-years on Fluke 43B,
one-year on accessories
Watts, power
factor, displacement power
factor, VA and
VAR
• Voltage
and current
waveforms
• Calculates threephase power
on balanced
loads from a
single-phase
measurement
• Catch up to
40 voltage
transients and
waveform
distortions
*Not including current probe specifications
Included accessories
The Fluke 43B includes a hard
case, voltage and current probes,
FlukeView® software, power quality
instructional CD, USB interface cable,
line voltage adapter/battery charger
and users manuals.
Recommended accessories – 43B Analyzer
i1000s
i2000flex
AC Current Probe
AC Current Clamp
See page 66
See page 66
TLK225
SureGrip Master
Accessory Kit
See page 61
C43
Carrying Case
See page 70
For more information and detailed specifications, go to www.fluke.com/pq
26
Power Quality Analyzers
Ordering information
Fluke-43B Power Quality Analyzer
Fluke 1760 Power Quality
Recorder Topas
cal Sa
tri
The Fluke 1760 Three-Phase Power
Quality Recorder is the ideal portable
instrument for power quality experts. It is
fully compliant to IEC 61000-4-30 Class-A,
for advanced power quality analysis and
consistent compliance testing. Designed
for analysis of utility and industrial power
distribution systems, in medium- and lowvoltage networks, the Fluke 1760 provides
the flexibility to customize thresholds,
algorithms, and measurement selections.
It captures the most comprehensive details
on user-selected parameters and allows for
later analysis and reporting.
ty
fe
Ele
c
Class-A compliance for the most
demanding power quality tests
1000 V CAT III
600 V CAT IV
•
•
•
•
•
Fully Class-A compliant: Conduct tests
according to the stringent international
IEC 61000-4-30 Class-A standard
GPS time synchronization: Correlate
data with events or datasets from other
instruments, with precision
Flexible and fully configurable
thresholds and scale factors: Allows
user to pinpoint specific issues by
defining the detailed criteria for detection
and recording of disturbances.
Highest safety rating in the industry:
600 V CAT IV/1000 V CAT III rated for
use at the service entrance
Uninterrupted power supply
(40 minutes): Never miss important
events—even record the beginning and
end of interruptions and outages, to help
determine the cause
•
•
•
•
•
10 MHz, 6000 Vpk waveform capture:
Get a detailed picture of even the
shortest event
2 GB data memory: Enables detailed,
simultaneous recording of numerous
power parameters for long periods of
time
Comprehensive software included:
Provides trend diagrams for root cause
analysis, statistical summaries, report
writing, and real-time data monitoring
in the online mode
Plug and play: Allows quick setup with
automatic sensor detection; sensors are
instrument powered, eliminating the
need for batteries
Rugged field design: Insulated housing
and a solid state design with no rotating
components, enable reliable testing
under nearly any conditions
For more information and detailed specifications, go to www.fluke.com/pq
Fluke 1650 RPM Power Recorder
Power recorder
Fewer connections, shorter set up, less mistakes.
Patented Full-Disclosure technology captures every
measurement, every event, on every cycle, all the
time—without thresholds. From simple set-ups to
finished reports, the Fluke 1650 is the complete
solution to your portable power recording needs.
The Power Recorder is all you need to record, analyze,
and document:
• Loading and load interaction
• Power consumption and demand
• Sags, swells, harmonics or transient events
• Ground currents
• Phase relationships, including phase
imbalance
Multipoint
For permanent installations, select Multipoint to get the same
performance as the portable Power Recorder—simultaneously measuring all power quality
parameters, as well as power consumption and harmonics.
Application note, literature code
2555030:
What does Class A
mean to me?
The new IEC 61000-4-30 Class A
standard takes the guesswork out
of selecting a
power quality
instrument.
The standard
IEC 610004-30 Class A
defines the
measurement methods for each
power quality
parameter to
obtain reliable, repeatable and
comparable
results. It also defines the accuracy,
bandwidth, and minimum set of
parameters. Going forward, manufacturers can begin designing to
Class A standards, giving technicians
a level playing field to choose from
and increasing their measurement
accuracy, reliability, and efficiency
on the job.
Included accessories
Fluke 1760 Recorder: Voltage
probes (4), current probes (4),
ethernet cable for network connection (1), crosslink ethernet cable for
direct PC connection (1), mains cable
(1), GPS time sync receiver, PC software on CD-ROM, operators manuals
and carrying case.
Fluke 1650 Recorder: Five flexible
current probes (four 1000 A and one
100 A), PAS software with report
writer, ethernet cable and manual.
Ordering information
Fluke-1760
Fluke-1760TR
1695-Flexi Pack
Without fast
transient, voltage
or current option
With fast transient
option
Power Recorder
These power quality recorders are
sold exclusively through power
quality representatives. To request
a demonstration, or to order, call
1-888-257-9897 or email questions
to fpqsupport@fluke.com.
Many configurations and accessories
are available for these recorders,
go to www.fluke.com/pq for more
information.
For more information and detailed specifications, go to www.fluke.com/pq
Power Quality Analyzers
27
Fluke 1740 Series ThreePhase PQ Loggers Memobox
Assess power quality and
conduct long-term studies with ease
Fluke 1744/1743
Fluke 1745
Compact and rugged, the Fluke 1740 Series Three-Phase
Power Quality Loggers are everyday instruments for technicians who troubleshoot and analyze power distribution
systems. Capable of simultaneously logging up to 500
parameters for up to 85 days and capturing events, the
Fluke 1740 Series helps uncover intermittent and hardto-find power quality issues. The included PQ Log software quickly assesses the quality of power at the service
entrance, substation, or at the load, according to the latest
EN50160 standard.
• Plug and play: Setup in minutes with automatic current
probe detection and powering
• Installs inside the cabinet: Compact, fully-insulated
housing and accessories fit easily in tight spaces, next
to live power
• Determines the root cause: Included PQ Log software
quickly analyzes trends, creates statistical summaries,
and generates detailed graphs and tables
• Monitors power for the long-term: Data can be
downloaded during recording without interruption
• Measure voltage with premium accuracy: IEC610004-30 Class-A compliant voltage accuracy (0.1 %)
• Quickly validate quality of power: Assess power
quality according to EN50160 power quality standard,
with statistical overview
• Rugged and reliable: Designed for everyday field use,
with no moving parts and durable, insulated case, with
two-year warranty
Application note, literature code
2646555:
Power quality recording and
analysis: Techniques and
applications
Hooking up a
power quality
recorder and
taking days’
worth of
data can give
you a rich
picture of your
power. In this
article we’ll
talk about
the various
recording
techniques
available in power loggers and
recorders-understanding the tools
and techniques you have available
will be key to your strategy. What
should you be looking for? And
when does recording make sense?
Power quality recording
and analysis: Techniques
and applications
Application Note
Hooking up a power quality recorder and taking
days’ worth of data can give you a rich picture
of your power. In this article we’ll talk about the
various recording techniques available in power
loggers and recorders—understanding the tools
and techniques you have available will be key to
your strategy. What should you be looking for?
And when does recording make sense?
Recording techniques
To really know your power, ideally,
you’d want to look at every line
cycle to see even the smallest
changes. However, since our power
swings through more than four
million cycles per day, it’s impractical to look at tiny changes—and
often unnecessary. Few loads even
notice occasional voltage dips of
one or two cycles.
How long you record depends
somewhat on the rhythm of your
building. If you are working on a
typical commercial or light industrial building, then a week is long
enough for a building to go through
its normal cycle. If you are working in a plant that runs special
equipment only periodically (say
a furnace that runs only monthly),
you’ll need to be sensitive to the
timing of these loads.
Different recording techniques
have been developed to look at
small changes over relatively long
time periods. Many instruments
combine several techniques to
improve their coverage. We’ll
describe the common techniques
and some of their pros and cons.
By understanding the different
techniques. you’ll be better able to
choose an appropriate tool for the
job at hand.
Setting up a Fluke 1735 Power Logger at the service entrance for a
30-day load study.
F ro m t h e F l u k e D i g i t a l L i b r a r y @ w w w. f l u k e . c o m / l i b r a r y
Want to read more? Go to www.
fluke.com/library to download this
and other application notes, or get
info specific to your industry and
sign up for Fluke News publications
at www.fluke.com/subscribe.
Features – 1740 Series PQ Loggers
Features
1745
1744
1743
Measurement of common power parameters: V, A, W, VA,
VAR, PF, energy, flicker, voltage events, and THD
•
•
•
Measurement of voltage and current harmonics to the
50th, unbalance, and mains signaling
•
•
Dust/water resistance
Display
UPS ride-through
Dimensions (HxWxD)
IP50
IP65 water proof
LED + LCD
LED
LED
5 hours
3s
3s
282 mm x 216 mm x 74 mm
(11.5 in x 8.8 in x 3 in)
170 mm x 125 mm x 55 mm
(6.9 in x 5.1 in x 2.2 in)
Recommended accessories – 1740 Series PQ Loggers
MBX CLAMP 1 A/10 A + N
3-phase+N current clamps
2 m cable
MBX 300 POLESET
Pole mounting kit for 1743 and 1744
C435
Water-tight hard case with rollers
For more information and detailed specifications, go to www.fluke.com/pq
Fluke VR101S Voltage Event Recorder System
Power tools for power quality
The VR101S is the perfect system for catching
sags, swells, transients, outages, and frequency
variations on line voltage at receptacles.
The VR101S is a starter system that includes a
compact VR101 event recorder, an optical interface cable, and EventView® software that turns
your PC into a power quality reporting tool. The
VR101S is covered by a one-year warranty.
For more information and detailed specifications, go to www.fluke.com/vr101
28
Power Quality Analyzers
Included accessories
Fluke 1740 Series: 4 Flexible
probes 15/150/1500/3000 A with
2 m cable, PQ Log software, RS-232
interface cable and RS-232-USB
adapter, 4 black dolphin clips, test
leads for voltages and power supply,
color localization kit, carrying bag,
test certificate with measurement
values, printed English manual and
multi-language manual CD.
VR101S: VR101, optical interface
cable, and EventView software on CD.
VR101: Instruction sheet.
Ordering information
Fluke-1743
Fluke-1744
Fluke-1745
VR101S
VR101
Power Quality
Logger – Memobox
Power Quality
Logger – Memobox
Power Quality
Logger – Memobox
Voltage Event
Recorder System
Voltage Event
Recorder
Note: At least one VR101S is required for
proper operation.
Fluke 1735 Three-Phase
Power Logger
Electrical load studies, energy consumption
testing, and general power quality logging
The Fluke 1735 Three-Phase Power
Logger is the ideal electrician or
technician’s tool for conducting energy
studies and basic power quality logging.
Set up the 1735 in seconds, with the
included flexible current probes and
color display. The 1735 logs most
electrical power parameters, harmonics
and captures voltage events.
Application note, literature code
2584800:
30 Day Load Studies with
the Fluke 1735 Power
Logger
Day Load
When a build- 30
Studies with the
Fluke 1735
Power
Logger
ing owner
wants you to
add new loads
to an existing
service or set
of feeders,
the first thing
you have to
is determine
whether
the existing
system will
support the new loads. If you have a
600 amp service installed in a facility, can you add another 100 amps
of load?
To answer this question you
have to ask another one: What is
the highest load the system carries now? Often, local electrical
authorities will need to know these
answers before they issue permits.
Application Note
When a building owner wants
you to add new loads to an existing service or set of feeders, the
first thing you have to is determine whether the existing system will support the new loads.
If you have a 600 amp service
installed in a facility, can you add
another 100 amps of load?
To answer this question you
have to ask another one: What is
the highest load the system carries now?
Often, local electrical authorities will need to know these
answers before they issue permits. You’ll also need a comprehensive understanding of today’s
loading to evaluate the new system, once installed.
To determine the existing
equipment’s capacity, factor in
the incoming conductor size, the
ratings of the equipment, and
space for new circuits. To determine present loading, you’ll need
to either precisely calculate the
existing loads, or measure them.
Article 220 of the 2005
National Electrical Code offers
two measurement methods for
determining existing loads and
the maximum demand the system
is likely to handle.
The NEC defines demand as
the power consumption of the
loads averaged over 15-minute
intervals.
The primary NEC method is to
find the maximum demand during a one-year period. This only
works if you have a year’s worth
of demand data.
The alternate method is to
record the demand over a 30-day
period and find the maximum
demand. This article describes
the 30-day recording method,
known as a load study.
The NEC specifies that:
• The highest demand is the
highest demand among all
feeders.
• Take the measurements when
the building is occupied.
• Include heating or cooling
loads, whichever is larger, or
correct to account for these
loads.
• Add in any other periodic
loads.
As always, local authorities
are responsible for interpreting
the Code and measurements.
Local regulations determine
when a load study must be performed, exactly what information
is required, and the review process. Make sure you understand
your local requirements before
you start a load study.
Recording Current
and Power with the
Fluke 1735
The compact, rugged Fluke 1735
Power Logger is an excellent tool
for performing load studies.
• It includes flexible current
probes for connecting around
multiple conductors or bus bars.
• It has a PC interface and
software for downloading
measurements to a Windows-based PC and creating
professional reports for your
electrical plans.
• It measures voltage on three
phases and current on three
phases and neutral.
• It records multiple parameters
that can help determine system
load, including voltage, current,
frequency, real power (kW),
From the Fluke Digital Library @ www.fluke.com/library
•
Record power and associated parameters
for up to 45 days
• Monitor maximum power demand over
user-defined averaging periods
• Prove the benefit of efficiency
improvements with energy consumption
tests
• Measure harmonic distortion caused by
electronic loads
•
•
•
•
•
Improve reliability by capturing voltage
dips and swells from load switching
Easily confirm instrument setup with
color display of waveforms and trends
Measure all three phases and neutral
with included 4 flexible current probes
View graphs and generate reports with
included Power Log software
Compact, rugged design with IP65 case,
600 V CAT III and two-year warranty
Recommended accessories – 1735 Three-Phase Power Logger
MBX Clamp 1 A/10 A
3 precision dual range
current clamps (1 A/10 A)
MBX Clamp 5 A/50 A +N
4 precision dual range
current clamps (5 A/50 A)
Want to read more? Go to www.
fluke.com/library to download this
and other application notes, or get
info specific to your industry and
sign up for Fluke News publications
at www.fluke.com/subscribe
C435
Water-tight hard case with rollers
Norma 4000 and 5000
High Precision Power Analyzers
The Norma High Precision Power Analyzers
deliver precise measurements of single or
three-phase current and voltage as well
as calculation of power and other derived
values. They provides class-leading
accuracy for any waveform, frequency or
phase shift. Its 144 mm (5.7 in) color display
makes it easy to use both in the field and as
a table unit in labs and on test benches.
Configurations
Included accessories
Fluke 1735 Logger: Four flexible
current probes (15 A/150 A/3000 A),
Power Log software, voltage leads
and clips, color localization set, PC
interface cable, international ac
adapter (115/230 V, 50/60 Hz), soft
carrying case, printed English manual and multi-language manual CD.
Number of channels
NORMA 4000: 1 phase or 3 phase; NORMA 5000 and 2x3 phases
Basic accuracy
0.05 % to 0.3 % ± rdg depending on options
Sample rate
1 MHz, 1/3 MHz or 0.1 MHz depending on options
Ranges
Up to 100 V and 10 A or 20 A direct inputs, depending on model. With shunts, transducer
or clamp accessories – up to 300 A.
Mechanical power
Optional process interface 4 x speed/torque/Pmech
Interfaces
RS-232, optional IEEE 488.2/1, Ethernet, USB
Norma 4000/5000 Analyzers:
Test certificate with calibration
values, user manual, power supply
cable and are completely customizable with a variety of accessories.
RMS values
V/A/P/Q/S and derived values like Fundamental, THD ...
Ordering information
Oscilloscope
Simultaneous display of up to three values on sample level
FFT
Up to H40 or half of sampling rate
Recorder
Display of three average values over time for trend determination
Vector
Display of Fundamental of all channels
Functions
Fluke-1735
Three-Phase
Power Analyzer
Norma 4000 BU43 High Precision
Power Analyzer
Norma 5000 BU56 High Precision
Power Analyzer
For more information and detailed specifications, go to www.fluke.com/pq
Power Quality Analyzers
29
Fluke 345 Power Quality
Clamp Meter
The ideal meter for commissioning and
troubleshooting modern electrical loads
With a bright color display to analyze the harmonic spectrum,
a low-pass filter to remove high frequency noise, and a high
EMC immunity design, the Fluke 345 is ideal for measurements
on switching loads such as variable speed drives, electronic
lighting and UPS systems. Additionally, the Hall Effect
measurement system makes measurement of dc current
possible without the need to break the circuit, and the internal
memory enables long-term logging for analysis of trends or
intermittent problems.
• AC/DC current: Clamp-on measurement of ac peak and dc
current up to 2000 A without breaking the circuit
• Highest safety rating: 600 V CAT IV/1000 V CAT III rated for
use at the service entrance
• Accurate measurement of parameters: Even with distorted
waveforms present on electronic loads with low-pass filter
• Data logging: Identify intermittent faults by logging
any power parameters for minutes or months, including
harmonics
• Verify batteries: Direct measurement of dc ripple (%) for
battery and dc systems
• Troubleshoot harmonics: Analyze and log harmonics
digitally or graphically
• Inrush current: Capture and analysis from 3 seconds to
300 seconds
• Easy-to-use: Easily confirm instrument setup with large
backlit color display of waveforms and trends
• Three-Phase power: Built in capability for balanced loads.
• View graphs and generate reports: with included Power
Log software
Application note, literature code
2722823:
Basic power quality
measurements on the go
with the Fluke 345
A great
introduction to
Basic power quality
power quality,
measurements on the
go with the Fluke 345
this short
application
note teaches
the basics of
simple voltage,
current,
waveform,
harmonics,
power, inrush,
and logging
measurements
using the
Fluke 345. Learn how to read
waveforms and how and where
to use them, and then learn about
harmonics and how they distort
voltage and current.
Application Note
During your day-to-day
measurement activities,
there may be situations
where you need to know
more than what voltage or
current is present. When
that happens, the standard
clamp meter isn’t going to
get the job done. The solution may be a power quality
clamp meter such as the
Fluke 345.
A power quality clamp
meter like the Fluke 345
combines a clamp meter,
power quality meter, oscilloscope and data logger
in one. This combination
of functions coupled with
high quality digital filtering
makes it ideal for working
with variable speed motor
drives, high efficiency lighting, and other loads using
switching electronics.
The basics
Of course, the Fluke 345 will make the basic measurements of voltage and current to determine if
there is something seriously wrong with the circuit
under test. It’s rated for use at the service entrance
with a 600 Volt CAT IV rating.
Measuring voltage is as simple as using a clamp
meter: Connect the test leads up to the voltage
inputs, select voltage, and then read the rms voltage. Current measurement is just as easy. Select
current, open the jaw, clamp around the wire and
measure. With the 2000A range and large jaw
opening, you can evaluate most of the circuits in
the building.
The Fluke 345 can also measure both ac and dc
voltage and current simultaneously, and identify
the magnitude of each separately and combined as
ac+dc true-rms. That’s helpful for checking a UPS,
battery, and output, to make sure that the circuits
are working correctly and the batteries are in good
condition. A dc voltage component on the output
of a UPS or even an adjustable speed motor drive
may even be a quick indicator of a developing
problem. For example, waveform non-symmetry
will cause an apparent dc voltage component and
may indicate impending failure of system output
electronics.
From the Fluke Digital Library @ www.fluke.com/library
Download this and other
application notes at www.fluke.
com/library or sign up for Fluke
News to get pertinent information on
your industry at www.fluke.com/
subscribe
LH1050 and LH1060 Power Clamp Meters
Ideal combination of a clamp and power meter
The LH1050/1060 ac/dc meters are essential tools for power
measurement and diagnostics on switching loads such as drives and
high efficiency lighting. They combine the functionality of a current
clamp, power meter and harmonics meter in a single handheld
instrument that has been designed to a CAT III 600 V rating. Common
applications include:
• Installing and testing of dc power systems
• Measurement of harmonics voltage and current on industrial systems
• Power and energy optimization
LH1050 and LH1060 features:
• Wide range of measuring tasks possible with V, A, Hz, W, VAR, VA and
•
•
•
•
•
•
•
PF in one easy to use clamp
True-rms ensures correct, accurate measurement of ac+dc and
distorted signals
Clear presentation of results with bargraph for dual display of V/Hz,
A/Hz and PF/W
Flexible applications with three-phase power capability for
balanced loads
Easy data evaluation with ‘Smart Hold’ saving up to 7 parameters
Capture trends with record mode storing Min Max and Average values
EL backlight visible in varying light levels
Two-year warranty
Additional LH1060 features:
• Check startup characteristics with measurement of peak voltage and
current values
Harmonic trouble shooting with measurement of Total Harmonic
Distortion (THD), Distortion Factor (DF) and Crest Factor (CF)
• Monitor the effects of loads with dc ripple measurement
•
For more information and detailed specifications, go to www.fluke.com/clamps
30
Clamp Meters
Included accessories
Fluke 345 Clamp Meter: Batteries,
pair of measuring leads, alligator
clips, operating instructions, Power
Log software, interface cable pouch,
and calibration certificate.
LH1050/LH1060 Clamp Meters:
Battery, pair of measuring leads,
operating instructions, and pouch.
Recommended
accessories
WINLOG S/W
WinLOG software for
LH 1050/1060,
Analyst 2050/2060
Ordering information
LH1050
LH1060
Fluke-345
AC/DC Power
Clamp Meter
AC/DC Power
Clamp Meter
AC/DC Power
Quality Clamp Meter
The LH1050 and LH1060 are not
available in Canada.
Fluke 360 AC Leakage
Current Clamp Meter
1 μA resolution leakage current measurements with a tough, pocket sized clamp
The unique jaw design of the Fluke 360 eliminates
the influence of adjacent current conductors
and measures leakage current down to 1 μA for
monitoring of insulation. The ergonomic design
of the Fluke 360 ensures easy measuring. The
measuring clamp fits into tight spaces and the
wide display angle clearly shows the measurement
result. The data hold button keeps the measured
value on the display after removing the clamp for
the measured conductor.
The light Fluke 360 offers the widest range
of current measurement for maintenance
professionals and contractors. Use the light and
rugged Fluke 360 when it’s not possible to power
down and break the circuit.
Current measurement
• Automatic ranging within the manually selected
•
•
•
•
•
•
mA or A range
Ranges 3/30 mA and 30/60 A
Current resolution 1 µA/0.01 mA and
0.01 A/0.1 A
Frequency range 50 and 60 Hz
Jaw size: 40 mm (1.55 in) maximum conductor
diameter
Auto power off
One-year warranty
LH41 AC/DC Low Current Clamp Meter
AC/DC current clamp for low current applications
The compact size of the LH41 makes it ideal for making
general measurements on small conductors. With excellent
accuracy and resolution of 1 mA, the LH41 offers exceptional
performance for automotive and other low current
applications.
Features
• Easy use autoranging ac/dc leakage current
•
•
•
•
•
•
•
•
measurements from 10 mA to 40 A
High 1 mA current resolution for quick circuit comparison
on sensor and control circuits
Patented jaw design for high accuracy, low dc current
measurement ensures no interference from other circuits
Push button dc Auto Zero for correct measurement
every time
Battery saving auto power off function
‘Carry everywhere’ pocket size, lightweight design
Convenient display hold for capturing measurement in
inaccessible spots
CAT III 300 V
Two-year warranty
LH2015 AC/DC
True-rms Clamp Meter
High current, large jaw clamp for
industrial and utility applications
The LH2015’s
large jaw is
suitable for current
measurements
up to 2000 A
ac/dc on large
conductors or bus
bars. The LH2015’s
measurement
accuracy is
unaffected by
external magnetic
fields or offcenter conductor
positioning due to
its advanced jaw
design. Its DisplayHold feature freezes
the measurement for
viewing after measuring and the
Max-Hold captures the maximum
measured current.
Current clamp measurement can be
used when:
• it’s not possible to power down
equipment and break the circuit.
• checking the current on large
loads to avoid overheating of
conductors.
• measuring large dc currents in
industrial drives.
Features:
• 2000 ac and dc current
•
•
•
•
•
measurement
Accurate true-rms measurement
for distorted waveforms
Large 50 mm (2 in) jaw capacity
Autoranging and Auto-zero
Display-Hold and Max-Hold
(surge)
Two-year warranty
Included accessories
Fluke 360 Clamp Meter: Soft
carrying pouch and users manual.
LH41 Clamp Meter: Battery and
operating instructions.
LH2015 Clamp Meter: Soft case and
users manual.
Ordering information
Fluke-360
LH41
LH2015
AC Leakage Current
Clamp Meter
AC and DC Current
Clamp Meter
AC/DC True-rms
Clamp Meter
These products are not available
in Canada.
For more information and detailed specifications, go to www.fluke.com/clamps
Clamp Meters
31
Get more done with the
latest Fluke tools
Move up to better design and
performance with Fluke clamp meters
It’s never been more important to be
efficient, fast, and accurate at your job.
Today, you need a tool that can keep up
with the demanding needs of residential,
commercial, and industrial electricians. The
Fluke 337 Clamp Meter provides you the
ability to work quickly and easily in narrow
and dark locations, and makes it possible to
keep track of your measurements for further
analysis.
The Fluke 337 is a significant
improvement from the Fluke 30 Series
clamps that were built in the mid 1990’s.
While the 30 Series was a leader in its day,
the 337 offers a design that is compact and
lightweight, and functionality that allows
you to take measurements that are more
precise.
Fluke 330 Series clamps are designed
more ergonomically with capabilities not
found in their predecessors, the Fluke 30, 31,
32, 33 and 36.
Specialty clamp meters
See page 54 for information on the NEW!
902 True-rms HVAC Clamp Meter.
See page 44 for information on the NEW!
771 Milliamp Process Clamp Meter.
Function
Fluke 30 Series Clamps
Fluke 337
Out of warranty
Three-year warranty
Small body and jaws fit
perfectly in your hand and
into tight places
—
•
Fits into tight areas for
maximum usability
Frequency measurement
—
•
Built-in frequency counter
Three-year warranty
Meter controls are positioned
so current measurements
can be done with one hand
(index finger on clamp
opening lever and thumb on
rotary switch)
—
•
Large, backlit display is
easy-to-see
—
•
Inrush current function for
measuring starting current for
motors, lighting, etc.
—
•
—
•
Max only
Min/Max
Improved low current
measurement accuracy
from new microprocessor
technology
Min/Max capability
Benefit
Lower cost of ownership
Easier to use, efficient
measurements
Use in dark areas
Easily measure inrush
current on motors, switches,
and circuit protectors to
determine if equipment can
work with high current levels
More precise measurements
Easily track your
measurements
For more information and detailed specifications, go to www.fluke.com/clamps
32
Clamp Meters
Fluke 337 Premium
Clamp Meter
• Rugged
• CAT III 600 V
• Inrush
• Compact
Fluke 337 and 322
Clamp Meters
Measure inrush motor starting current
the way a circuit breaker sees it
•
•
•
•
•
•
•
•
•
Making accurate inrush
current measurements
Inrush current feature (selected models)
Small body and jaws fit perfectly in your hand
and into tight places
Controls positioned for one hand operation
Accurate low current measurements
Backlight available on most models
Auto shut-off
Display hold
Safety rating: IEC 1010-2-031, CAT III 600 V
Three-year warranty on 330 Series
New high-efficiency motors require
better tools to evaluate and fix the
consequences of their high inrush
current. The Fluke 335, 336 and
337 Clamp
Meters are
designed
to capture
inrush current
accurately
and, most
importantly,
synchronously
and provide
readings that
accurately
depict what
the circuit
protector
experiences.
This application note covers
practices to help you accurately
and safely measure and interpret
inrush current measurements.
Fluke 322 Clamp Meter
• Precise measurements with 1.8 % basic accuracy
• Resolution up to 0.01 A and 0.1 V
• Measures ac current 40.00 A/400.0 A
• Measures ac and dc volts to 600 V
• Resistance measurement to 400 W
• Continuity for quick checking of shorts
Specifications – 320 and 330 Series
Fluke 320 and 330 Series Clamp Meters offer an impressive array of innovative features with
current ranges up to 1000 A. Choose the model that matches the jobs you do.
(@23 °C ± 5 °C RH
0 to 90 %)
Fluke 321
Fluke 322
Fluke 333
Range
to 400.0 A
40.00 A/
400.0 A
to 400.0 A
AC
current Accuracy
1.8 % + 5 counts
(50 to 60 Hz)
AC response
Fluke 334
Range
DC
current
Accuracy
—
—
—
—
—
—
—
—
400.0 V/600.0 V
Accuracy
1.2 % + 5 counts
(50 to 400 Hz)
AC response
Ohms
100 mS
0 to
600.0 A
—
—
—
Accuracy
—
2 % + 3 counts
1 % + 5 counts
(50/60 Hz)
1 % + 5 counts
(20 to 100 Hz)
True-rms
400.0 V/
600 V
to 600.0 W
600.0 W/6000 W
1 % + 5 counts
1.5 % + 5 counts
< 30 W
Continuity
Range
—
—
—
—
—
—
to 400 Hz
Accuracy
—
—
—
—
—
—
0.5 % + 5
counts
MIN/MAX
—
—
—
—
—
—
Yes
Backlight
—
—
—
Hz
HxWxD
Size
Yes
Yes
Display hold
7.5 in x 2.5 in x 1.4 in
9.4 in x 3.1 in x 1.6 in
9.9 in x 3.1 in x 1.6 in
Max wire dia.
1 in
1.2 in
Weight
8 oz
11 oz
Want to read more? Download
this and other application notes at
www.fluke.com/library
Models 333, 334, 335, 336
and 337
Operating temperature: -10 °C to 50 °C
(-14 °F to 122 °F)
Altitude: 2,500 meters
Battery life: (2) AA alkaline approximately
150 hours continuous, automatic low battery
indicator
Safety rating: IEC 1010-2-031, CAT III 600 V
Temperature de-rating: Add 0.1 x specified
accuracy for each ºC above 28 ºC or below
18 ºC
Storage temperature: -40 ºC to 60 ºC
(-40 ºF to 140 ºF)
Models 321 and 322
to 600.0 V
1 % + 5 counts
to 400.0 W
Range
0 to
999.9 A
to 600.0 V
Averaging
Range
Accuracy
to 999.9 A
True-rms
—
Range
Fluke 337
2 % + 5 counts
(10 to 100 Hz)
Averaging
—
DC
volts
Fluke 336
to 600.0 A
—
AC
volts
Fluke 335
2 % + 5 counts
(50 to 60 Hz)
Inrush Integration time
Application note, literature code
2041766:
Operating temperature: -10 °C to 50 °C
(-14 °F to 122 °F)
Altitude: 2,000 meters
Battery life: (2) AAA carbon zinc
approximately 100 hours continuous,
automatic low battery indicator
Safety rating: IEC 1010-2-031, CAT III 600 V
Temperature de-rating: < 18 °C, > 28 °C add
0.1 x specified accuracy /°C
Storage temperature: -30 °C to 60 °C
(-22 °F to 140 °F)
See page 54 for information on the
NEW! 902 True-rms HVAC Clamp Meter
Recommended accessories – 320 and 330 Series
Included accessories
Soft carrying case, test leads,
(2) batteries, instruction card and
safety information.
TL223
SureGrip™ Electrical Test Lead Set
See page 61
H3
Clamp Meter Holster
See page 70
LVD1
Volt Light
See page 64
TL71
Premium Test Lead Set
See page 62
Ordering information
Fluke
Fluke
Fluke
Fluke
321
322
333
334
Fluke 335
Fluke 336
Fluke 337
For more information and detailed specifications, go to www.fluke.com/clamps
Clamp Meters
33
Fluke 1550B and 1520
MegOhmMeters
Powerful troubleshooting and
predictive maintenance tools
The 1550B automatically calculates
polarization index and dielectric absorption ratios. The 1550B features:
• Standard test voltages of 250 V,
500 V, 1000 V, 2500 V and 5000 V
for a wide range of equipment testing
• Programmable test voltages
available in 50-volt steps from 250 V
to 1000 V and 100-volt steps from
1000 V to 5000 V
• Automatic calculation of Dielectric
Absorption Ratio (DAR) and Polarization
Index (PI) with no additional setup
• Easy setup saves time and effort when
conducting “timed” and “ramp” test of
insulation breakdown
• Improved ramp function (0 V dc to
5000 V dc) for breakdown testing
• Autodischarge of capacitive voltage
• Measures resistances up to one
teraohm
• Includes improved FlukeView®
Forms Software and Optical Interface
cable for easier downloading to a
Windows® PC
Specifications – 1550B MegOhmMeter
The meter’s accuracy is specified for one year after calibration at operating temperatures of 0 °C to 35 °C. For operating temperatures outside
the range (-20 °C to 0 °C and 35 °C to 50 °C), add ± .25 % per °C,
except on the 20 % bands add ± 1 % per °C.
Insulation resistance measurement
Test Voltage (dc)
Range
Accuracy (± reading)
250 V
200 kW to 5 GW
5 GW to 50 GW
5%
20 %
500 V
200 kW to 10 GW
10 GW to 100 GW
5%
20 %
1000 V
200 kW to 20 GW
20 GW to 200 GW
5%
20 %
2500 V
200 kW to 50 GW
50 GW to 500 GW
5%
20 %
5000 V
200 kW to 100 GW
100 GW to 1 TW
5%
20 %
Accuracy (± reading)
Function
Range
Leakage current
1 nA to 2 mA
± (5 % + 2 nA)
Capacitance
measurement
0.01 uF to 15.00 µF
± (15 % rdg + 0.03 µF)
Live circuit
indicator
30 V to 600 V ac/dc,
50/60 Hz
± (5 % + 2 V)
Short circuit current: greater than 1 mA and less
than 2 mA
Bargraph range: 0 to 1 TΩ
Insulation test voltage accuracy: -0 % to +10 % at
1 mA load current
Induced ac mains current rejection: 2 mA maximum
Charging rate for capacitive load: 5 seconds per µF
Timer: 0 to 99 minutes; settable in 1 minute increments; indicated to within 1 second
Ramp: 0 % to 100 % of selected test voltage, or until
breakdown
Dimensions (HxWxL): 330 mm x 242 mm x 170 mm
(13 in x 9.5 in x 6.7 in)
Weight (with battery): 4 kg (8.8 lb)
Battery type: 12 V, lead-acid, rechargeable
Charger input (ac): 85 to 250 V ac, 50/60 Hz, 50 VA
Operating temperature: -20 ºC to 50 ºC
(-4 ºF to 122 ºF)
Storage temperature: -20 ºC to 65 ºC (-4 ºF to 149 ºF)
Relative humidity: 80 % at 31 °C decreasing linearly
to 50 % at 50 °C
Operating altitude: 0 to 2000 meters
Enclosure sealing: IP 40
Safety conformance: EN 61010-1, CAT III, 600 V,
EN61557, Parts 1 & 2
Input overload protection: 600 V ac continuous
Warranty: Two-years
Software: FlukeView® Forms Basic Software requires a
PC running Windows® 95, 98, Me, 2000, NT4.0
FVF-UG
TL1550EXT
FlukeView Forms
25 Foot Extension
Software Upgrade
Test Lead Set
See page 65
Fluke 1550B MegOhmMeter: Test
leads, 5000 V-rated probes, alligator
clips, interface adapter and cable,
FlukeView Forms software, line cord,
soft carrying case, and users manual.
Fluke 1520 MegOhmMeter: TL27
Heavy Duty Test Leads, TP74
Lantern Tip Test Probes, AC285
Large Jaw Alligator Clips, protective
holster with hand strap, carrying
case with accessory storage, four
C-cell alkaline batteries, instruction
manual, and instruction manual on
CD-ROM.
L206
Deluxe LED Hat Light
See page 64
Recommended accessories – 1520 MegOhmMeter
TL27
ToolPak™
SH100
Heavy-Duty
Meter Hanger
Shoulder harness
Test Lead Set
See page 71
for 1520
See page 62
TL223
SureGrip™ Electrical
Test Lead Set
See page 61
C43
Soft Carrying Case
See page 70
For more information and detailed specifications, go to www.fluke.com/1550
34
Insulation Resistance Testing
A proven workhorse,
the 1520 can make
up to 5,000 insulation resistance tests,
more than any other
Fluke insulation
tester, without changing batteries. A dual
analog/digital display
makes it easy to use.
A lo-ohms function
measures voltage and
checks connections.
Thanks to superb accuracy, endurance, and handheld size,
the 1520 is a long-standing tool
of choice for demanding plant and
utilities work.
• Large, backlit LCD with analog
bar graph and digital display
• Three output voltages for insulation resistance testing: 250 V,
500 V and 1000 V
• Perform up to 5,000 insulation
resistance tests without changing
batteries
• Insulation resistance testing up to
4000 MW; switches automatically
to voltage measurement when
voltage is greater than
30 V ac or 30 V dc
• Auto-discharge of capacitive
voltage
• AC/DC voltage measurement up
to 600 V
• Lo-Ohms function for testing
connections
• Last reading memory display
Included accessories
Recommended accessories – 1550B MegOhmMeter
Fluke 1520
MegOhmMeter
Ordering information
Fluke-1520 MegOhmMeter
Fluke-1550B MegOhmMeter
Fluke 1587 and 1577
Insulation Multimeters
Two powerful tools in one
The Fluke 1587 and 1577 Insulation Multimeters combine a
digital 1 kV insulation tester with a full-featured, true-rms
digital multimeter in a single compact, handheld unit, which
provides maximum versatility for both troubleshooting and
preventative maintenance. Whether you work on motors,
generators, cables, or switchgear, the Fluke 1587 and 1577
Insulation Multimeters are ideally suited to help you with
your tasks.
• Insulation test (1587: 0.01 MW to 2 GW)
(1577: 0.1 MW to 600 MW)
• Insulation test voltages (1587: 50 V, 100 V, 250 V, 500 V,
1000 V), (1577: 500 V, 1000 V) for many applications
• Live circuit detection prevents insulation test if voltage
> 30 V is detected for added user protection
• Auto-discharge of capacitive voltage for added
user protection
• Filter for motor drive measurements (1587 only)
• AC/DC voltage, dc milliVolts, ac/dc milliamps,
resistance (W), and continuity
• Capacitance, diode test, temperature, Min/Max, and
frequency (Hz) (1587 only)
• Auto power off to save battery power
• Large display with backlight and large digits
• Included accessories: Remote probe, test leads and probes,
alligator clips, (K-type thermocouple, 1587 only)
• Accepts optional Fluke TPAK™ magnetic hanging system to
free your hands for other work
• Rugged, utility hard case allows you to bring everything
you need for the job
• Three-year warranty
Get the most value and
productivity from Fluke kits
Establishing a preventive maintenance program is becoming critical to
maintaining the uptime of electrical
equipment and can significantly
reduce both planned and unplanned
downtime. Unplanned downtime
costs are difficult to calculate, but are
often significant. For some industries,
it can represent 1 % to 3 % of
revenue (potentially 30 % to 40 % of
profits) annually.
These kits can help you be
proactive and efficient with your
maintenance and can save you up
to 10 % off the individual price of
the tools.
Fluke 1587/ET Advanced Electrical
Troubleshooting Kit includes:
•
•
•
Fluke 1587 Insulation Multimeter
Fluke i400 Current Clamp
Fluke 62 Mini Infrared
Themometer
Fluke 1587/MDT Advanced Motor
and Drive Troubleshooting Kit
includes:
Specifications
1587
Insulation test voltages 50 V, 100 V,
250 V, 500 V, 1000 V
Insulation test voltages 500 V, 1000 V
Insulation test: 0.01 MW to 2.0 GW
1577
•
•
•
Insulation test: 0.1 MW to 600 MW
•
Auto-discharge of capacitive voltage
•
Insulation test smoothing reading
•
Frequency
•
Capacitance
•
Diode test
•
Temperature
•
Min/Max
•
Low-pass filter (for work on VSDs)
•
AC/DC Voltage
•
•
DC Millivolts
•
•
AC/DC milliAmps
•
•
Resistance (0.1 W to 50 MW)
•
•
Continuity
•
•
Three-year warranty
•
•
Remote probe, test leads, alligator clips
•
•
K-type thermocouple
•
Rugged, utility hard case
•
•
Auto power off
•
•
•
•
•
•
Fluke 1587 Insulation Multimeter
Fluke i400 Current Clamp
Fluke 9040 Phase Rotation
Indicator
Included accessories
Remote probe, test leads,
alligator clips, K-type thermocouple
(1587 only), hard case and user
documentation.
Ordering information
Recommended accessories
ToolPak™
Meter Hanger
See page 71
i400s
AC Current Clamp
See page 66
C25
Meter Case
See page 70
For more information and detailed specifications, go to www.fluke.com/1587
Fluke-1577
Insulation
Multimeter
Fluke-1587
Insulation
Multimeter
Fluke-1587/ET Advanced
Electrical
Troubleshooting Kit
Fluke-1587/MDT Advanced Motor
and Drive
Troubleshooting Kit
Insulation Resistance Testing
35
Fluke 1507 and 1503
Insulation Testers
Insulation resistance testing
in the palm of your hand
Application note, literature code
1579160:
Insulation resistance testing
The Fluke 1507 and 1503 Insulation Testers are
compact, rugged, reliable, and easy to use. With
their multiple test voltages, they are ideal for many
troubleshooting, commissioning, and preventive
maintenance applications. Additional features, like the
remote probe on these tools save both time and money
when performing tests.
Insulation test ranges:
• 1507: 0.01 MW to 10 GW
• 1503: 0.1 MW to 2 GW
Insulation test voltages:
• 1507: 50 V, 100 V, 250 V, 500 V, 1000 V
• 1503: 500 V, 1000 V
• Save both time and money with automatic calculation
•
•
•
•
•
•
•
•
•
•
•
•
•
•
of Polarization Index and Dielectric Absorption Ratio
(1507 only)
Make repetitive tests simple and easy with the
1507’s compare (Pass/Fail) function (only available on
the 1507)
Repetitive or hard-to-reach testing is easy with the
remote test probe
Live circuit detection prevents insulation test if
voltage > 30 V is detected for added user protection
Auto-discharge of capacitive voltage for added user
protection
AC/DC voltage: 0.1 V to 600 V
Lo-Ohms/Earth bond continuity (200 mA)
Resistance: 0.01 W to 20.00 KW
Save battery power with auto-power off
Read measurements easily with large, backlit display
CAT IV 600 V overvoltage category rating for added
user protection
Remote probe, test leads, probes, and alligator clips
included with each tester
Accepts optional Fluke ToolPak™ magnetic hanging
system to free your hands for other work
Four AA alkaline batteries (NEDA 15 A or IEC LR6) for
at least 1000 insulation tests
One-year warranty
Insulation
resistance
testers can
be used to
determine
the integrity
of windings
or cables
in motors,
transformers,
switchgear,
and electrical
installations.
The test
method is determined by the type
of equipment being tested and the
reason for testing. For instance,
when testing electrical cabling
or switchgear (low-capacitance
equipment) the time-dependent
capacitive leakage and absorption
leakage currents become insignificant and decrease to zero almost
instantly. A steady conductive
leakage current flow is reached
almost instantly (a minute or less)
providing perfect conditions for the
spot-reading/short time resistance
test.
Want to read more? Download this
and other application notes at
www.fluke.com/library, or sign
up for Fluke News for pertinent
information on your industry at
www.fluke.com/subscribe
Features – 1507 and 1503 Testers
Feature
1507
Insulation test voltages 50 V, 100 V, 250 V, 500 V, 1000 V
1503
•
Insulation test voltages 500 V and 1000 V
•
•
Insulation test: 0.01 MW to 10 GW
•
Insulation test: 0.01 MW to 2 GW
PI/DAR
•
Auto discharge of capacitive voltage
•
•
Remote test probe, test leads, alligator clips
•
•
Rugged utility hard case
•
•
Auto power off
•
•
Recommended accessories – 1507 and 1503 Testers
Included accessories
Remote probe, test leads, test
probes, alligator clips, holster and
user documentation.
C101
Meter Hard Case
See page 70
ToolPak™
Meter Hanger
See page 71
C25
Meter Case
See page 70
For more information and detailed specifications, go to www.fluke.com/1507
36
Insulation Resistance Testing
Ordering information
Fluke-1507
Fluke-1503
Insulation Tester
Insulation Tester
Pick the right
process tool for you
Process Tools Selection Guide
Model
Loop Calibrator
Pressure
Calibrator
Temperature
Calibrator
Precision
Multifunction
Process
Calibrator
Intrinsically
Safe
Calibrator
Documenting
Process
Calibrator
Process mA
Clamp Meter
ProcessMeter®
Test Tool
715
718
724
726
725Ex
744
771
789
30 V
30 V
30 V
300 V
1000 V
300 V
1000 V
Measure
V dc
25 V
V ac (true-rms)
Resistance
A dc
24 mA
24 mA
3200 W
4000 W
3200 W
11 kW
24 mA
24 mA
24 mA
110 mA
15 kHz
10 kHz
50 kHz
•1
•5
•1
40 MW
20.99, 99.9 mA
A ac
30 mA, 1 A
•
Frequency
1 psi, 30 psi,
100 psi and
300 psi
Pressure
Temperature: RTDs
7 types
8 types
7 types
8 types
Temperature: TCs
12 types
13 types
12 types
13 types
20 kHz
Source/Simulate
V dc
20 V
10 V
20 V
10 V
15 V
3200 W
4000 W
3200 W
11 kW
24 mA
24 mA
24 mA
22 mA
24 mA
•
•
•
•
•
Resistance
mA dc/% scale
mA source; auto step,
auto ramp
Frequency
15 kHz
10 kHz
50 kHz
Temperature: RTDs
7 types
8 types
7 types
8 types
Temperature: TCs
12 types
13 types
12 types
13 types
Record
Min/Max
•
•
Hold
•
•
As Found/As Left results
•
Log data
•
Upload data to PC
•
•
•
•
Remote operation
•
•
Features
24 V loop supply
•
•
•
•
12 V
•
•
Non-contact measurement
•
Hart communication
•
Integrated hand pressure
pump
•
Intrinsically safe (ATEX)
Warranty
•
3 years
1 year
3 years
3 years
1 year
3 years
NIST traceable
certification
•
•
•
•
•
•
Accessories3
A/B
C
A/B
A/B
•
•
•
39
45
38
Pressure enabled4
See page
•
42
41
40
1 year
3 years
A/B
44
43
1Fluke
700 Pressure Modules required.
the internal sensor or a Fluke 700 Pressure Module may be used.
3Accessories: A. Compatible with LockPak B. Compatible with ToolPak C. Accepts hanging straps from ToolPak D. Optional accessories
4Fluke Process Calibrators in this guide displaying the Pressure Enabled symbol display readings from the 700 Series Pressure Modules.
5Fluke 700PEx Pressure Module required.
2Either
Process Calibration Tools
37
Fluke 741B, 743B and
744 Calibrators
For the calibration and troubleshooting
of process control instrumentation
•
•
•
•
•
•
•
•
•
•
•
Calibrate temperature, pressure, voltage, current,
resistance and frequency instruments
Built-in procedures for transmitters, square root
transmitters, pressure and temperature switches
Simultaneously measure and source
Automatically capture calibration results
Document procedures and results to meet ISO 9000,
EPA, FDA, OSHA, and other government requirements
Measure/simulate 13 types of thermocouples and
eight RTDs
Store up to 8,000 readings in data logging mode
(743B and 744 only)
Protected against dirt, dust and moisture; unaffected
by vibration
Includes a PC interface (743B and 744 only)
Operate in English, French, German, Italian and Spanish
Offer one- and two-year calibration cycles and a
three-year warranty (one-year for pressure modules)
Pressure
Enabled
Application note, literature code
1262439:
HART® transmitter
calibration
The need for calibration of HART
smart transmitters is often misunderstood. What do you calibrate and
when? Here is a step-by-step
procedure showing how to use the
Fluke 744 to perform calibration and
digital adjustments of Rosemount
3051 and 3144 transmitters and
other HART devices.
744: Get HART-ability
The Fluke 744 offers all of the capabilities of the 743B, plus
the ability to calibrate, maintain, and troubleshoot HART
instrumentation. Integrated HART communication functions
permit you to monitor, control, and calibrate HART instrumentation. It handles fast pulsed instruments such as RTD
transmitters and PLCs, with pulses as short as 1 ms.
See www.fluke.com/744upgrade for the latest list of
HART instruments.
741B: A complete documenting calibrator
The 741B is the economical choice for plants that don’t use
PCs or that require traditional paper forms. It has storage
capacity for a day’s calibration and measurement data. When
you’re back at the shop, recall the data on-screen to fill out
calibration forms.
743B: More memory, plus a PC interface
and data logging
The 743B has all the capabilities of the 741B plus a PC
interface that lets you load procedures, lists, and instructions
created with software—or unload data for printing, archiving,
and analysis. With its expanded memory, the 743B can hold
a full week of calibrations and procedures.
Specifications – 741B, 743B and 744
Function
Measure
Sourcing
DC voltage
0.025 % reading +
0.005 % full scale
0.01 % output +
0.005 % full scale
DC current
0.01 % reading +
0.015 % full scale
0.01 % output +
0.015 % full scale
Resistance
0.05 % reading + 50 mΩ
0.01 % output + 40 mΩ
Frequency
0.05 %
0.01 %
Thermocouples
0.3 °C
0.2 °C
RTDs
0.3 °C
0.1 °C
Pressure
To 0.25 % of full scale, per pressure
module specifications.
Summary specifications: best case,
midrange, one-year.
Battery life: Typically over eight hours
Internal battery pack: NiCd, 7.2 V,
1700 mAh, NiMH 3500 mAh on 744.
Battery replacement: Via snap-shut
door without opening calibrator; no
tools required
Weight: 1.4 kg (3 lb 1 oz)
Size (HxWxD): 236 mm x 130 mm x
61 mm (9.3 in x 5.1 in x 2.4 in)
Instrumentation
management software
The Fluke 743B and 744 are compatible
with Fluke 700SW DPC/TRACK software
and with software from Beamex,
Cornerstone, Emerson, Honeywell,
On Time Support, Prime Technologies,
Yokogowa, Intools and Meridium.
For more information, visit
www.fluke.com/software
Included accessories
TL224 Industrial Test Leads (2 sets),
AC220 Test Clips (2 sets), TP220
Test Probes, BP7217 Battery Pack,
BC7217 Battery Charger, instruction
manual, NIST Traceable calibration
certificate and data, serial port cable
(743B and 744 only), DPC/TRACK
sample version with free PC communication utility software (743B and
744 only).
Additional 744 accessories
BP7235 NiMH Battery Pack, HART
communications cable, HART user’s
manual and NIST Traceable calibration certificate and data.
Ordering information
Recommended accessories – 741B, 743B and 744
C789
Meter and
Accessory Case
See page 70
Fluke-700PTP
Fluke-700Pxx
Pneumatic
Pressure Modules
Test Pump
See page 41
See page 69
80PK-25
SureGrip Piercing
Temperature Probe
See page 68
For more information and detailed specifications, go to www.fluke.com/740
38
Process Calibration Tools
TL220
SureGrip Industrial
Test Lead Set
See page 61
Fluke-741B
Fluke-743B
Fluke-744
Fluke-700S
Documenting Process
Calibrator
Documenting Process
Calibrator
Documenting Process
Calibrator
DPC/Track
Software
Fluke 726 and 725 Multifunction Process Calibrators
Step up to unmatched accuracy in
process measurement and calibration
Fluke 725 Multifunction
Process Calibrator
• Measure volts, mA, RTDs,
Pressure
Enabled
Fluke 726 Precision Multifunction
Process Calibrator
The Fluke 726 Precision Multifunction Process Calibrator
is designed specifically for the Process industry with
broad workload coverage, calibration power and
unsurpassed accuracy in mind. The 726 measures and
sources almost all process parameters and can calibrate
almost anything. The 726 will also interpret results
without the help of a calculator and store measurement
data for later analysis.
•
•
•
•
•
•
•
•
•
Precise measurement and calibration source
performance, accuracies of 0.01 %
Transmitter error% calculation, interpret calibration
results without a calculator
Memory storage for up to 8 calibration results, return
stored calibration data from the field for later analysis
Frequency totalizer and frequency pulse train source
mode for enhanced flowmeter testing
HART mode inserts 250 ohm resistor in mA
measure and source for compatibility with HART
instrumentation
Integrated pressure switch test allows you to capture
the set, reset and deadband of a switch
Custom RTD curves, add calibration constants for
certified RTD probes for enhanced temperature
measurement
New voltage input protection design for improved
reliability
Three-year warranty
•
•
•
•
•
thermocouples,
frequency and ohms
to test sensors and
transmitters
Source/simulate volts,
mA, thermocouples,
RTDs, frequency,
ohms and pressure to
calibrate transmitters
Measure/source
pressure using any
of 29 Fluke 700Pxx
Pressure Modules
Source mA with
simultaneous pressure
measurement to
conduct valve and
I/P tests
Support flow meter
testing with frequency
and counts per minute (CPM)
functions
Perform fast linearity tests with
auto step and auto ramp features
Intrinsically safe version available
(see page 45)
Specifications – 726 and 725 Calibrators
Simultaneous function
capability
Channel
A
Channel
B
24.000 mA dc
M
M or S
Measure and source
24.000 mA dc with 24 V
loop supply
M
Function
Range or type
Resolution
Accuracy
Notes
Voltage
0 to 100 mV
0 to 10 V (source)
0 to 20 V (source)
0 to 30 V (measure)
0.01 mV
0.01 V
0.01 V
0.01 V
0.01 %,
0.02 %
Rdg + 2 LSD
Max load, 1 mA
mA
0 to 24
0.001 mA
0.01 %,
0.02 %
Rdg + 2 LSD
Max load, 1000 W
mV (TC
terminals)
-10.00 mV to
+75.00 mV
.01 mV
0.01 %, 0.02 %
of range + 1 LSD
Ohms
15 W to 3,200 W
5 W to 4,000 W
0.01 W
to 0.1 W
0.10 W to 1.0 W
0.015 %
Hz - CPM
2.0 to 1,000 CPM
1 to 1000 Hz
1.0 to 10.0 kHz
10.0 to 15.0 kHz
0.1 CPM
1 Hz
0.1 kHz
0.1 kHz
± 0.05 %
± 0.05 %
± 0.25 %
± 0.05 %
Loop supply
24 V dc
N/A
10 %
T/C
J, K, T, E, L, N, U, XK
0.1 °C, 0.1 °F
to 0.7 °C
to 0.2 °C
T/C
B, R, S, BP
1 °C, 1 °F
to 1.7 °C
to 1.2 °C
RTDs
Cu (10), Ni120 (672)
Pt 100, 200, 500,
1000 (385)
Pt 100 (3916),
Pt 100 (3926)
0.01 °C,
0.01 °F
to 0.15 °C
0.1 °C, 0.1 °F
to 0.2 °C
Source;
5 V p-p
1 V to 20 V p-p
squarewave,
-0.1 V offset
General specifications
Storage temperature:
-20 °C to 71 °C
Operating temperature:
-10 °C to 55 °C
Relative humidity:
90 % (10 °C to 30 °C);
75 % (30 °C to 40 °C);
45 % (40 °C to 50 °C);
35 % (50 °C to 55 °C)
Shock: 1 meter drop test
Safety: CSA C22.2
No. 1010.1:1992
EMC: EN50082-1:1992 and
EN55022:1994 Class B
Size (HxWxD): 200 mm x
96 mm x 47 mm (7.9 in x
3.8 in x 1.9 in)
Weight: 650 g (23 oz)
Battery: Four AA alkaline
batteries
Battery life: 25 hours
typical
Unique 726 specifications are bolded
Recommended accessories – 726 and 725 Calibrators
Fluke-700PTP
C125
ToolPak
80PK-27
Pneumatic
Meter Case
Meter Hanging Kit
SureGrip Industrial
Surface Temperature Probe
Test Pump
See page 70
See page 71
See page 69
See page 68
100.00 mV dc
30.000 V dc measure
M or S
M
20.000 V dc measure
10.000 V dc source
20.000 V dc source
M or S
15 to 3200 Ohms
5 to 4000 Ohms
M or S
Thermocouple J, K, T, E, R, S,
B, M, L, U, N, XK, BP
M or S
RTD Cu 10, Ni120; Pt100 (392);
Pt100 (JIS); Pt100, 200, 500,
1000 (385), XK and BP
M or S
Pressure (requires Fluke
700PXX Modules)
M
M used
as S
Frequency; 10 kHz;
(15 KHz 726)
M or S
M = Measure, S = Source/Simulate
Included accessories
TL75 Test Leads, AC72 Test Clips,
one pair of stackable test leads,
product overview manual (print)
and users manual in 14 languages
on CD-ROM.
Ordering information
Fluke-726 Precision Multifunction
Process Calibrator
Fluke-725 Multifunction Process
Calibrator
Fluke-724 Temperature Calibrator
(also see page 40)
For more information and detailed specifications, go to www.fluke.com/726
Process Calibration Tools
39
Fluke 712, 714 and 724
Temperature Calibrators
Accurate and rugged,
temperature calibration tools
ata Sheet, literature code
D
1560369:
Temperature
calibration
The Fluke 710 Series temperature calibrators deliver
outstanding performance, durability and reliability. And
with a push-button interface, similar to the multifunction Fluke 740 Series Documenting Process Calibrators,
the 710s are easy to use. Each calibrator is EMI tolerant,
dust- and splash-resistant, and features a removable
battery door for quick battery changes.
See how Fluke
can help you
calibrate,
troubleshoot
and verify the
most common
temperature
devices, faster
and easier.
Fluke 712 RTD Calibrator
• Compatible with pulsed current transmitters
• Measure temperature from an RTD probe
• Simulate RTD output
• Operates with seven types of RTD
• Measure additional RTDs using Ohms measurement
•
•
•
•
function
Simulate additional RTDs using Ohms source function
°F or °C selectable
25 % stepping, auto-step and auto-ramp
Ramp and Step Ramp output functions
Fluke 714 Thermocouple Calibrator
• Measure temperature from TC probes
• Simulate TC output
• Operable with nine types of thermocouples
• Calibrate linear TC transmitter with mV source function
• Selectable °F or °C
• 25 % stepping, auto-step and auto-ramp
• Available as accessories: Fluke 700TC1 and TC2
•
Want to read
more? Download
this and other
application notes at
www.fluke.com/library
Fluke 724 Temperature
Calibrator
• Source/measure TCs, RTDs,
volts and ohms
Measure mA while supplying
loop power
• 25 % and 100 % stepping,
auto-step and auto ramp
•
Thermocouple Mini-plug Kits
Ramp and Step Ramp output functions
Specifications – 712 and 714 Calibrators
Model
Function
Range
Resolution
Accuracy
Notes
Fluke-712
Measure/simulate RTD
-200 °C to 800 °C
(Pt 100-385)
0.1 °C, 0.1 °F
0.2 °C, 0.4 °F
(Pt 100-385)
Pt; 100 200 500
1000 (385); Pt 100
(392); Pt 100 (392) JIS;
Ni 120 (672)
Measure/simulate
resistance
5 W to 4000 W
0.1 W
0.025 %
Measure/simulate
thermocouple
-200 °C to 1800 °C,
depending on type
(K, -200 °C to
1370 °C)
0.1 °C or °F
(1 °C or °F; BRS)
0.5 °C, 0.8 °F
(Type K)
Measure/simulate mV
-10 mV to 75 mV
0.01 mV
0.015 % +10 µV
Fluke-714
9 TC types; J K T E R
S B per NIST 175 and
ITS-90 L U per DIN
43710 and PTS-68
General specifications for all Fluke 712 through 718 calibrators
Maximum voltage: 30 V Non-operating temperature: -40 °C to 60 °C Operating temperature: -10 °C to 55 °C
Relative humidity: 95 % (10 °C to 30 °C); 75 % (30 °C to 40 °C); 45 % (40 °C to 50 °C); 35 % (50 °C to 55 °C)
Operating altitude: 3,000 m max Shock: 1 m drop test Vibration: Random, 2 g, 5-500 Hz
Safety: CSA C22.2 No. 1010.1:1992 EMC: EN50082-1:1992 and EN55022:1994 Class B
Size/weight (HxWxD) (712-717): 187 mm x 87 mm x 32 mm (7.35 in x 3.41 in x 1.25 in) 330 g (12 oz)
Size/weight (HxWxD) (712-717 with holster): 201 mm x 98 mm x 52 mm (7.93 in x 3.86 in x 2.06 in) 600 g (21 oz)
Size/weight (HxWxD) (718): 210 mm x 83 mm x 62 mm (8.25 in x 3.27 in x 2.44 in) 737 g (26 oz)
Size/weight (HxWxD) (718 with holster): 216 mm x 94 mm x 66 mm (8.50 in x 3.72 in x 2.60 in) 992 g (35 oz)
Power: 9 V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718
Battery life: 4 to 20 hours, typical, depending on functions used
Warranty: Three-years (one-year on pressure pump in Fluke 718)
TL75 (712 and 724)
C550
Hard Point
Tool Bag
Test Lead Set
See page 70
See page 62
TL220 (712 and 724) C25 (712 and 714)
SureGrip Industrial
Large Soft Case
Test Lead Set
See page 70
See page 61
Included accessories
Each 71X calibrator includes:
Protective yellow holster with test
lead storage, test leads and alligator
clips (excluding model 714), single
9 V alkaline battery and instruction
sheet (14 languages).
Recommended accessories – 712, 714 and 724 Calibrators
80PK-24 (714)
SureGrip Air
Temperature Probe
See page 68
Fluke 724: TL75 Test Leads, AC72
Test Clips, one pair of stackable test
leads, product overview manual
(print) and users manual in 14
languages on CD-ROM.
Ordering information
C101 (724)
Meter Hard Case
See page 70
80PK-3A (714, 724)
Surface Probe
See page 68
ToolPak
Meter Hanging Kit
See page 71
For more information and detailed specifications, go to www.fluke.com/tempcal
40
Process Calibration Tools
Fluke-712 RTD Calibrator
Fluke-714 Themocouple Calibrator
Fluke-724 Temperature Calibrator
Fluke 718 and 717
Pressure Calibrators
Pressure
Enabled
Compact, professional,
pressure calibration tools
Application note, literature code
2577485:
Pressure calibration with the
Fluke 718
Fluke 718 Pressure Calibrators
New design protects on-board
pump from fluid
damage. This
application note
explains how
to drain pressure lines safely
before calibration, and how to
clean the pressure pump on the
new Fluke 718.
New! 1 psi and 300 psi models in addition to the
30 and 100 psi models previously available
• Compact size, lightweight
• New built-in pressure switch test feature
• Built-in pressure/vacuum hand pump, with vernier
•
•
•
•
•
and bleed valve
Pressure and vacuum measurement to 0.05 % of full
span, using an internal pressure sensor (dry air only)
Pressure measurement to 10,000 psi/700 bar using
any of 29 Fluke 700Pxx Pressure Modules
Measure mA with 0.015 % accuracy and 0.001 mA
resolution, while providing 24 volt loop power supply
1⁄8 inch NPT female pressure fitting
Min/Max/Hold functions
0RESSURECALIBRATION
WITHTHE&LUKE
.EWDESIGNPROTECTSON
BOARD
PUMPFROMFLUIDDAMAGE
!PPLICATION.OTE
0ROTECTYOURTOOLS
0RESSURECALIBRATIONTYPICALLY
INVOLVESAPNEUMATICCALIBRATION
PUMPANDAPRESSURECALIBRA
TIONTOOLORREFERENCEGAUGE4HE
PUMPAPPLIESPRESSURETOBOTH
THEDEVICEUNDERTEST$54 AND
6
THECALIBRATIONTOOLSEEFIGURE
4HETRICKISTHATBEFOREYOU
6
CANAPPLYPRESSUREWITHAPNEU
MATICHANDPUMP YOUABSOLUTELY
MUSTFIRSTDRAINALLCONDENSATE
ANDOILFROMTHELINES7HY )F
THERESOILORWATERTRAPPEDIN
THELINEWHENTHEPUMPISCON
2ED
NECTED THATFLUIDCANBEPULLED
BACKINTOTHEPUMPWHENTHE
PRESSUREISRELEASED4HATCAN
"LACK
EITHERCAUSECOSTLYDAMAGETOTHE
PUMP ORATTHEVERYLEASTFORCE
YOUTODISASSEMBLEANDCLEANTHE
PUMPBEFORERE
USE
&IGURE4ODRAINPROCESSmUIDS CLOSE6ANDOPEN6BEFORECONNECTINGTHE#ALIBRATOR
&ORTHISREASON THEUPDATED
&LUKE0RESSURE#ALIBRA
THECOMPLEXITYANDCOSTOFREPAIR ENTERINGTHEPUMPANDCAUSING
TORNOWCONTAINSANINNOVATIVE
OFAPUMPFOULEDBYPROCESS
DAMAGE4HESETWOCHECKVALVES
NEWPUMPDESIGNTHATISEASILY
MEDIAISNORMALLYHIGHERTHANA ALLOWTHEBI
DIRECTIONALFLOWOF
CLEANEDINTHEFIELDANDINHIBITS STANDALONEPUMP
AIRINTOOROUTOFTHE
DAMAGEFROMPROCESSFLUIDS
%VENAFTERDRAININGTHEPRO
5SINGTHEUPDATED
#ALIBRATORPUMP
0NEUMATICPRESSURE
CALIBRATORSWITH
INTEGRATEDTESTPUMPS
)NSTEADOFTHEPUMP
PLUS
CALIBRATORMETHODDESCRIBED
ABOVE MANYTECHNICIANSNOW
USEAHANDHELDPNEUMATICPRES
SURECALIBRATORTHATINCLUDESAN
ONBOARDPNEUMATICPUMP MAR
RYINGTWODEVICESINTOONEHANDY
INTEGRATEDTOOL7HILETHEINTE
GRATEDPUMPISMORECONVENIENT
ANDEASIERTOUSE ITISDOUBLY
IMPORTANTTOMAKESUREPROCESS
FLUIDSAREPROPERLYDRAINEDBEFORE
MAKINGACONNECTION"ECAUSE
THEPUMPITSELFNORMALLYNEEDS
TOBEREMOVEDFROMTHECALIBRA
TORBEFORECLEANING REBUILDINGOR
REPLACEMENTCANBEPERFORMED
CESSFLUIDFROMTHECALIBRATION
PORTOFTHEDEVICEUNDERTEST
MINUTEAMOUNTSOFPROCESS
4HENEW&LUKEISAUNIQUELY
FLUIDSMAYOFTENSTILLBELURKING
PROTECTEDPNEUMATICPRESSURE
BEHIND)NTHEEVENTTHESEFLUIDS
CALIBRATORANDPUMP4HENEW
ENTERTHEPUMPCAVITIES THE
PUMPDESIGNUSESPROTECTIVE
NEWPUMPDESIGNENABLESQUICK
CHECKVALVESTHATALLOWAIRTO
CLEANINGANDMAINTENANCE EVEN
PASSTHROUGHTHEPUMPFORCALI
INTHEFIELD
BRATIONBUTINHIBITSFLUIDSFROM
!IRFLOWTO
INPUT
CONNECTOR
ANDVERNIER
ADJUSTMENT
)NLET
/UTLET
4OPUMP
&IGURE4HE&LUKEISDESIGNEDTOPROTECTTHEHANDPUMPANDSIMPLIFYMAINTENANCE
ÀÊÌ
iÊÕiÊ }Ì>Ê LÀ>ÀÞÊJÊÜÜÜ°vÕi°VÉLÀ>ÀÞ
Want to read more? Download
this and other application notes
at www.fluke.com/library
Intrinsically safe 718 version available (see page 45)
Fluke 717 Pressure Calibrators
Now with 9 ranges: 1, 30, 100, 300, 500, 1000,
1500, 3000 and 5000 psi
• Measure pressure and vacuum to 0.05 % of full scale
with internal 30 or 100 psig sensor
– 1/8 NPT pressure fitting
– Compatible with non-corrosive gasses and liquids
• Measure pressure to 10,000 psi/69 mPa using one of
29 Fluke 70Pxx Pressure Modules
• Measure mA with 0.015 % accuracy and 0.001 mA
resolution, while providing 24 V loop power
• New built-in pressure switch test feature
• Min/Max/Hold functions
Pressure
Enabled
Fluke Process
Calibrators in
this catalog
displaying
the Pressure
Enabled symbol
display readings
from the 700
Series Pressure
Modules.
Fluke 700 Series
Pressure Modules
• 29 pressure modules
• 8 intrinsically safe pressure modules*
• Ranges from 1.000 in H 0
2
Specifications – 717 and 718 Calibrators
•
•
(0.2491 kPa) to 10,000 psi
(68.948 MPa)
Gage, differential, dual (compound),
absolute, and vacuum modules
Rugged cases protect the modules
from harsh environments
Full-accuracy performance from
0 °C to 50 °C
Pressure readings update twice per
second, and may be displayed in
up to 11 different units
One-year warranty
Range
Resolution
Comment
+/- 1 psi, 27.5 in H20,
(-7 - +7 kPa)
+0.0001 psi, 0.0001 kPa,
0.0001 in H20
Fluke-718 dry air only and
includes on board pump
-12 to + 30 psi,
(-83 to 207 kPa)
0.001 psi, 0.001 kPa, 0.001
in H20
Fluke-718 dry air only and
includes on board pump
-12 to + 100 psi,
(-83 to 690 kPa)
0.01 psi, 0.01 kPa, 0.01 in H20
Fluke-718 dry air only and
includes on board pump
-12 to +300 psi,
(-83 to +2070 kPa)
0.01 psi, 0.01 kPa, 0.01 in H20
718-300G
Fluke-718 dry air only and
includes on board pump
•
717-500G
0-500 psi, 0-3450 kPa
0.01 psi, 0.1 kPa
Compatible with non-corrosive
gases and fluids
*for use with 718Ex and 725Ex only
(see page 45 for more information)
717-1000G
0-1000 psi, 0-6900 kPa
0.01 psi, 0.1 kPa
Compatible with non-corrosive
gases and fluids
717-1500G
0-1500 psi, 0-10342 kPa
0.1 psi, 1 kPa
Compatible with non-corrosive
gases and fluids
717-3000G
0-3000 psi, 0-20700 kPa
0.1 psi, 1 kPa
Compatible with non-corrosive
gases and fluids
717-5000G
0-5000 psi, 0-34500 kPa
0.1 psi, 1 kPa
Compatible with non-corrosive
gases and fluids
Pressure accuracy
0.05 % of range
mA measurement
0-24 mA range
0.001 mA resolution
Accuracy: ± 0.015 % + 1 count
Loop power
24 V dc
717-1
718-1G
717-30G
718-30G
717-100G
718-100G
717-300G
Accuracy: ± 10 %
Recommended accessories – 717 and 718 Calibrators
700ILF
In-Line Filter
See page 69
700LTP
Low Pressure
Test Pump
See page 69
TL220
C25 (717 only)
SureGrip Industrial
Large Soft Case
Test Lead Set
See page 70
See page 61
700HTP
Hydraulic Test Pump
See page 69
For more information and detailed specifications, go to www.fluke.com/pressure
•
•
Included accessories
Fluke 718 and 717: Protective
yellow holster, test leads and
alligator clips, single 9 V alkaline
battery (two 9 V batteries in 718)
and instructions.
Ordering information
Fluke-718
Fluke-718
Fluke-718
Fluke-718
Fluke-717
Fluke-717
Fluke-717
Fluke-717
Fluke-717
Fluke-717
Fluke-717
Fluke-717
Fluke-717
30US Pressure
100US Pressure
1G
Pressure
300G Pressure
30G Pressure
100G Pressure
1G
Pressure
300G Pressure
500G Pressure
1000G Pressure
1500G Pressure
3000G Pressure
5000G Pressure
Calibrator
Calibrator
Calibrator
Calibrator
Calibrator
Calibrator
Calibrator
Calibrator
Calibrator
Calibrator
Calibrator
Calibrator
Calibrator
Process Calibration Tools
41
Fluke 715, 707 and
705 Loop Calibrators
Application note, literature
code 1989137:
Complete family of volt/mA calibrators
Troubleshooting
process loops
Fluke 707 and 705
In process
systems, problems with
the loop can
bring things to
a screeching
halt. In this
application
note, find out
how to use
Fluke test tools
to identify
current loop
prolems such
as noise,
ripple and drift.
Two powerful models to choose from
• Innovative output adjustment dial on 707 provides
•
•
•
•
•
•
•
•
•
1 µA and 100 µA resolution and one-hand operation
Large display and simple interface for ease of use
Simultaneous mA and % readout for quick, easy
interpretation of readings
mA accuracy of 0.015 % on the Fluke 707 and 0.02 %
on the 705
HART™ mode on 707 connects 250 ohm resistor in
series with 24 V loop for compatibility with HART
communicators
Push button 25 % steps for fast, easy linearity checks
“Span Check” for fast confirmation of zero and span
Selectable slow and fast linear step ramp provide
ramping outputs for valve slewing, remote testing
and loop functional tests
24 V internal loop supply, so you can power and read
a transmitter at the same time without carrying a DMM
0 mA to 20 mA or 4 mA to 20 mA default start
up modes
Intrinsically safe 707 version available (see page 45)
Fluke 715 Volt/mA Calibrator
• Source voltage to 200 mV or 20 V
• Measure loop current (0 to 20 mA,
•
•
•
Specifications – 715, 707 and 705
Functions
•
Fluke 705 and 707
4 to 20 mA) signals with 0.01 %
accuracy and 1 µA resolution
Measure voltage output process
signals from PLCs, transmitters
Source or simulate 24 mA
loop current
24 V loop supply with simultaneous
current measurement
Ramp and Step Ramp output functions
Fluke 715
Voltage measurement
Range
Resolution
Accuracy
0 to 28 V
0 to 200 mV
0 to 25 V
1 mV
10 µV
1 mV
705: 0.025 % Rdg + 1 LSD 707,
707Ex: 0.015 % Rdg + 2 LSD
0.01 % Rdg + 2 LSD
0 to 24 mA
0 to 24 mA
Current measurement
Range
Resolution
Accuracy
0.001 mA
0.001 mA
705: 0.02 % Rdg + 2 LSD 707,
707Ex: 0.015 % Rdg + 2 LSD
0.01 % + 2 LSD
Current sourcing
Range
0 to 20 mA or 4 to 20 mA
0 to 20 mA or 4 to 20 mA
705: 0.025 % Rdg + 2 LSD 707,
707Ex: 0.015 % Rdg + 2 LSD
0.01 % Rdg + 2 LSD
705: 1000 W @ 24 mA 707: 1200 W @
24 mA 707Ex: 700 W @ 20 mA
1000 W @ 24 mA
1
Accuracy
Drive capability
1
Loop power while measuring mA
24 V
24 V
Voltage sourcing
N/A
0 to 200 mV or 0 to 20 V
Display current and % of span
Yes
mA or %
Auto step, auto ramp
Yes
Yes
Span Check
Yes
Yes
Battery life
18 hours typical, at 12 mA
18 hours typical, at 12 mA
Will over-range to 24 mA
1
Recommended accessories – 715, 707, 707Ex and 705 Calibrators
Included accessories
Fluke 715: Protective yellow holster, test leads and alligator clips,
single 9 V alkaline battery and
instruction sheet (14 languages).
Fluke 705, 707 and 707Ex:
Protective holster, TL75 Test Leads,
AC72 Test Clips and instruction
sheet (14 languages).
TL28A
Heavy Duty
Test Lead Set
See page 62
TL220
C25
C550
SureGrip Industrial
Large Soft Case
Tool Bag
Test Lead Set
See page 70
See page 70
See page 61
For more information and detailed specifications, go to www.fluke.com/loop
42
Process Calibration Tools
PV350
Pressure Vacuum
Module
See page 65
Ordering information
Fluke-715
Fluke-707
Fluke-707Ex
Fluke-705
Volt/mA Calibrator
Loop Calibrator
IS Loop Calibrator
Loop Calibrator
Fluke 789 and 787
ProcessMeter ™ Test Tools
Safety rated multimeters with mA source
In-field valve positioner
checks
Fluke 789 ProcessMeter
With the Fluke 789 ProcessMeter, process technicians
can do a lot more while carrying a lot less.
Key Fluke 789 features:
• 24 V loop power supply
• HART mode setting with loop power
(adds 250 ohm resistor)
Double-sized, dual display
20 mA drive into 1200 ohms
Backlight with two brightness settings
0 to 100 % mA Span Check buttons to toggle between
4 mA and 20 mA
• Infrared I/O serial port compatible with FlukeView®
Forms Software
• Improved battery power with four AA batteries
• Plus all the proven 787 features
•
•
•
•
Fluke 787 ProcessMeter
• Simultaneous mA and % of scale readout on mA output
• 25 % Manual Step plus Auto Step and Auto Ramp on
•
•
Application note, literature code
2041342:
Valve positioners
open and close
with a 4 to
20 mA signal
applied. This
application note
explains how to
adjust these
valves so they
open and close
correctly.
Want to read
more? Download
this and other
application notes
at www.fluke.com/library
mA output
Min/Max/Average/Hold/Relative modes
Externally accessible battery for easy changes
Designed and
Conforms to
IEC 1010-1
600V
CAT IV
(Fluke 789 only)
Specifications – 789 and 787 ProcessMeter
Measurement function
Best accuracy range and resolution
V dc
400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V
(% of reading + LSD)
0.1 % + 1
V dc (true-rms)
400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V
0.7 % + 2
mA dc
30.000 mA
.05 % + 2
A dc
1.000 A (0.440 A continuous)
0.2 % + 2
A ac
1.000 A (0.440 A continuous)
Resistance
400.0 W, 4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M
Frequency (0.5 Hz to 20 kHz)
199.99 Hz, 1999.9 Hz, 19.999 kHz
Diode Test
789: 2.000 V (shows diode voltage drop) 787:
2.400 V (shows diode voltage drop)
Continuity
Beeps for resistance < approx. 100 ohms
Output function
Range and resolution
DC current output (Internal
battery operation)
0.000 mA to 20.000 mA or 4.000 mA to 20.000 mA
(selectable at power-up) Over-range to 24.000 mA
789: 24 V compliance
or, 1,200 Ohms,
@ 20 mA 787: 12 V
compliance or,
500 Ohms, @ 20 mA
.05 %
DC current simulate
(Ext. 24 Volt loop supply,
up to 48 V on 789 only)
0.000 mA to 20.000 mA or 4.000 mA to 20.000 mA,
(selectable at power-up) Over-range to 24.000 mA
1000 Ohms, @ 20 mA
.05 %
24 V loop supply
789: Minimum 24 V 787: not available
250 Ohms @ 20 mA
> 24 V
Current adjustment modes
Manual: Coarse, Fine, 25 % and 100 % step
(100 % step 789 only) Automatic: slow ramp,
fast ramp, 25 % step
1%+2
0.2 % + 1
.005 % + 1
2%+12%+1
Drive capability
Accuracy
(% of span)
Temperature range of 18 °C to 28 °C, for one year after calibration
Maximum voltage applied between any jack and earth ground:1000 V rms Storage temperature: -40 °C to 60 °C
Operating temperature: -20 °C to 55 °C Relative humidity: 95 % up to 30 °C; 75 % up to 40 °C; 45 % up to 50 °C; 35 % up to 55 °C
Safety: Designed in accordance with EN61010, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No. 1010.1-92 Over-voltage CAT III
Size (HxWxL)/weight (787 with holster): 52 mm x 98 mm x 201 mm (2.06 in x 3.86 in x 7.93 in)/638 g (1.4 lb)
Size (HxWxL)/weight (789): 50 mm x 100 mm x 203 mm (1.97 in x 3.94 in x 8.00 in)/600 g (1.3 lb)
Recommended accessories – 787 and 789 ProcessMeter
TL220
ToolPak
SureGrip Industrial
Meter Hanging Kit
See page 71
Test Lead Set
See page 61
80T-150U
C125
Universal
Meter Case
Temperature Probe
See page 70
See page 69
PV350
Pressure Vacuum Module
See page 65
Included accessories
Fluke-789 ProcessMeter: TL71
Premium Safety-Designed Test Lead
Set plus alligator clips, 4 AA alkaline
batteries (installed), product overview
and users manual (CD-ROM) in
14 languages.
Fluke-787 ProcessMeter: Protective
yellow holster with test lead storage,
TL75 Safety-Designed Test Lead Set
plus alligator clips, one 9 V alkaline
battery (installed), product overview
and users manual (CD-ROM) in
14 languages.
Ordering information
Fluke-789 ProcessMeter
Fluke-787 ProcessMeter
For more information and detailed specifications, go to www.fluke.com/processmeters
Process Calibration Tools
43
Fluke 771 Milliamp
Process Clamp Meter
Save time and money troubleshooting
process control loops
The innovative new Fluke 771 mA Process Clamp Meter is
designed to measure, test, and troubleshoot 4-20 mA control signals without breaking the mA loop. Make mA measurements in
active control systems without disrupting process control.
Features:
• Best in class 0.2 % accuracy
• Resolution and sensitivity to 0.01 mA
• Hold function captures and displays changing measurements
• Dual display with both mA measurement and 0 % to 100 % of
4 mA to 20 mA span
• Measurement spotlight illumination hard to see wires in dark
enclosures
• Detachable clamp with extension cable for measurements in
tight locations
• Includes carrying case that can be used as a belt mounted
holster
Key uses:
• Measure mA signals for PLC and control system analog I/O
• Measure 4 mA to 20 mA output signals from transmitters
• Measure 10 mA to 50 mA signals in older control systems
using the 99.9 mA range
Detachable clamp used to measure 4 mA
to 20 mA signals on transmitters without
breaking the loop.
Fluke 771
included accessories
N10140
Carrying case, and instruction
manual.
Ordering information
Range
Resolution
Accuracy
Features
Notes
-20.99 mA to +20.99 mA
0.01 mA
0.2 % or reading Zero, Hold, backlight,
+ 5 counts
measurement spotlight
Use for measuring and troubleshooting
4 mA to 20 mA signals
-21.0 mA to -99.9 mA
+21.0 mA to +99.9 mA
0.1 mA
1 % reading
+ 5 counts
Use for measuring and troubleshooting
10 mA to 50 mA signals
Zero, Hold, backlight,
measurement spotlight
For more information and detailed specifications, go to www.fluke.com/processmeters
9102S and 9100S Handheld Drywell
Temperature Calibrators
Fluke Corporation, Hart Scientific Division
The smallest, lightest and most
portable dry-wells in the world
• 9100 model weighs only 2 pounds, 3 ounces
(1 kilogram)
• Temperature ranges from -10 °C to 375 °C
• Stability during calibrations to ± 0.05 °C
• Fast and easy calibrations of RTDs and
thermocouples
• Includes RS-232 interface, instrument
control software
• Direct interface to the Fluke 744
44
Fluke-771
9102S and 9100S
ordering information
9100S-A-156
9100S-A-256
9100S-B-156
9100S-B-256
9100S-D-156
9100S-D-256
9300
9102S-156
9102S-256
9320-156
9320-256
Dry-Well, Block A (1)
Dry-Well, Block A (2)
Dry-Well, Block B (1)
Dry-Well, Block B (2)
Dry-Well, Block D (1)
Dry-Well, Block D (2)
Rugged Carrying
Case, 9100
Dry-Well, -10 to 122
(2 Wells) (1) (3)
Dry-Well, -10 to 122
(2 Wells) (2) (3)
Battery Pack, 9102 (1)
Battery Pack, 9102 (2)
9102S and 9009
inserts
3102-1
3102-2
9100S
9102S
Range
35 °C to 375 °C (95 °F to 707 °F)
-10 °C to 122 °C (14 °F to 252 °F) at 23 °C ambient
Accuracy
± 0.5 °C
± 0.25 °C
Stability
± 0.1 °C at 100 °C ± 0.3 °C at 375 °C
± 0.05 °C at 0 °C
Well-to-well
uniformity
± 0.2 °C with sensors of similar size at equal depths within wells
Stabilization
5 minutes
7 minutes
Well depth
102 mm (4 in); 1.6 mm (1/16 in) hole is 89 mm (3.5
in) deep
102 mm (4 in)
3102-7
Removable inserts
N/A
1/4 in, 3/16 in (Standard) 1/16 in, 1/8 in, 3/8 in
(optional)
3102-8
Power
115 V ac (± 10 %), 1.5 A or 230 V ac (± 10 %, 0.8 A,
specify, 50/60 Hz, 175 W
94 V ac to 234 V ac (± 10 %), 50/60 Hz, 60 W; or
12 V dc
Size (H x W x D)
57 mm x 125 mm x 150 mm (2.25 in x 4.9 in x 5.9 in)
99 mm x 140 mm x 175 mm (3.9 in x 5.5 in x 6.9 in)
Weight
1 kg (2 lb, 3 oz)
1.8 kg (4 lb)
NIST-traceable
calibration
Data at 50 °C, 150 °C, 200 °C, 250 °C, 300 °C and
350 °C
Data at -10 °C, 24 °C, 50 °C, 55 °C, 100 °C and 122 °C
Process Calibration Tools
Milliamp Process
Clamp Meter
3102-3
3102-4
3102-6
9308
Insert, AL 1/16 in
(1.6 mm)
Insert, AL 1/8 in
(3.2 mm)
Insert, AL 3/16 in
(4.8 mm)
Insert, AL 1/4 in
(6.4 mm) (Standard)
Insert, AL 3/8 in
(9.5 mm) (Standard)
Insert, AL 7/16 in
(11.1 mm) (Standard)
Insert, AL 5/32 in
(4 mm) (Standard)
Hard Carrying Case,
9102/9132
(1) 156 Blocks are 115 V 50/60 Hz
(2) 256 Blocks are 220 V 50/60 Hz
(3) Specify two 3102 inserts
Intrinsically Safe
Products
Calibrators, thermometers and multimeters
designed to intrinsic safety standards
What is “Intrinsically Safe”?
Intrinsic safety is a protection method employed in potentially explosive atmospheres.
Devices that are certified as “intrinsically safe” are designed to be unable to release
sufficient energy, by either thermal or electrical means, to cause ignition of flammable
material (gas or dust/particulates).
There are no global intrinsically safe standards or certifications, but there are
organizations that influence directives in certain world geographies.
Factory Mutual
In The United States, Factory Mutual Research, managed by
Factory Mutual (FM) Global, is a not-for-profit scientific and testing
organization that has tested and certified over 40,000 products in
the last 165 years. FM Research has set certification guidelines for
equipment used in potentially explosive atmospheres.
Canadian Standards Association (CSA)
ATEX
The primary intrinsically safe standard which has been set in the
European Union with the Directive 94/9/EC, commonly called ATEX
(“Atmosphères Explosibles,”) French for explosive atmospheres.
For more information and detailed specifications, turn to the
corresponding non-intrinsically safe product pages (Fluke 707, 718,
725, 574, 68) or go to www.fluke.com/ex
Fluke products
ATEX certified
For
additional
product
detail
87V Ex: Intrinsically
Safe True-rms Multimeter
See page 14
II 2 G EEx ia IIC T4
707Ex: Intrinsically
Safe mA Calibrator
II 2 G EEx ia IIC T4
N.I. Class I, Div 2,
Groups A-D T4
See page 42
718Ex: Intrinsically
Safe Pressure Calibrator
II 1 G EEx ia IIC T4
I.S. Class I, Div 1,
Groups A-D T4
See page 41
II 1 G EEx ia IIB 171 °C
I.S. Class I, Div 1,
Groups B-D, 171 °C
See page 39
II 1 G EEx ia IIC T4
I.S. Class I, Div 1,
Groups A-D T4
See page 41
700PEx: Intrinsically
Safe Pressure Modules
Fluke 574-NI Nonincendive
Infrared Thermometer
See page 51
Fluke 68IS Intrinsically Safe
Infrared Thermometer
Class I, Division 1,
Groups A, B, C, D
Class I, Zone 0 AEx
ia IIC
Want to know
what industries
Intrinsically Safe
products are
designed for?
Want to know
why intrinsic
safety is so
important? Want
to make sense
of the product
ratings and
classifications?
Fluke 68IS Intrinsically Safe
Infrared Thermometer
• Laser guided sighting
system for easy targeting
with 1 % accuracy
• 12-point data logging
• Advanced optics to
measure smaller targets
at greater distances
• Adjustable emissivity for
more accurate temperature
measurements
• Selectable MAX, MIN, DIF
and AVG functions that
display values instantly
with Hi/Lo Alarm
• Expanded measurement
range up to 760 °C (1400 °F)
• RTD probe accessory included
for dual contact and non-contact
temperature measurements
• Class I, Division 1, Groups A, B, C,
D Class I, Zone 0, AEx ia IIC, T4 at
50 °C when used with 9 V alkaline
battery
Not available for purchase in Europe.
Ordering information
725Ex: Intrinsically Safe
Multifunction Calibrator
Class I, Division 2,
Groups A, B, C, D;
Class I, Zone 2 IIC
Making sense of intrinsic
safety and intrinsically
safe tools
Go to www.fluke.com/ex
Accreditation body for North American regulations based in
Toronto, Canada.
North American
Certification
Application note, literature code
2096400:
See page 53
For more information and detailed specifications, turn to the corresponding non-intrinsically
safe product pages (Fluke 87V, 707, 718, 725, 574, 68) or go to www.fluke.com/ex.
Fluke-87V Ex
Fluke-707Ex
Fluke-718Ex
Fluke-725Ex
Fluke-700PEx
Fluke-574-NI
Fluke-68IS
IS True-rms
Multimeter
IS Loop
Calibrator
IS Pressure
Calibrator
IS Multifuction
Process Calibrator
Pressure Modules
(700P01Ex,
700P05Ex,
700P06Ex,
700P09Ex,
700P24Ex,
700P27Ex,
700P29Ex and
700PA4Ex)
Precision Infrared
Thermometer w/
Logging SW
Nonincendive
Infrared
Thermometer
Intrinsically Safe
Intrinsically Safe Products
45
Ti40 and Ti50 Series IR
FlexCam® Thermal Imagers
The thermal imagers for
professionals demanding the best
FIND problems faster with
Fluke thermal imagers.
Reduce costs and maximize uptime
with our complete range of imaging
solutions. They combine the largest,
sharpest images in the industry with
innovative, easy-to-use features. Fluke
Ti40 and Ti50 Series reveal more
with IR Fusion® Technology—merging
infrared and visible light images in
one display. Fluke puts powerful
technology within your reach.
Fluke Ti40, Ti45,
Ti50, Ti55
Application note, literature code
2764017:
Thermography at Ford’s
Dearborn Stamping Plant
The Dearborn
Stamping Plant
at Ford’s
Dearborn Stamping Plant:
has had thermal Thermography
cameras on site
in the past, but
has not met
the objectives
of a successful
thermography
program. Today,
DSP’s thermography program
is a model for
the rest of Ford,
and the program
came on line in a matter of weeks.
Want to read more? Download
this and other application notes
at www.fluke.com/library
From start to best-in-Ford in
30 days—and still accelerating
The Dearborn Stamping Plant has had thermal cameras
on site in the past, but has not met the objectives of a
successful thermography program. Today, DSP’s thermography program is a model for the rest of Ford, and
the program came on line in a matter of weeks.
caption
Application Note
Lately, there has been a stream
of visitors to the Dearborn
Stamping Plant (DSP) housed in
the historic Ford Rouge Center
in Dearborn, Michigan. What’s
the attraction? The DSP operation, which manufactures subassembly doors and hoods for
the popular Ford F-150 pickup
truck, achieved a perfect score in
a recent independent audit of its
weld effectiveness. That makes
the plant best in company—
perhaps the best period—when
it comes to the precision with
which it forms and welds subassemblies. Executives from Ford
Motor Company corporate offices
and management from other Ford
operations want to know how
they do it.
A significant factor is a condition-monitoring program using
thermography or thermal imaging. Thermography itself isn’t
new to DSP or new to Ford
operations, but the DSP thermography program is unique. After
only 30 days, the program scored
higher in an insurance audit
than any other Ford thermography program had ever scored. It
continued to work even when
new thermography team members came on board. In the best
tradition of Ford’s commitment to
continuous improvement, DSP’s
thermography program keeps
getting better. And possibly the
most distinctive aspect: the program is designed around a systems approach and supported by
a systems solution. That means
it has the potential to be quickly
and easily replicated and the
possibility of being deployed
with equal success and equivalent return on investment in any
Ford operation.
From the Fluke Digital Library @ www.fluke.com/library
Fluke Ti40FT, Ti45FT,
Ti50FT, Ti55FT
Features – Ti40 and Ti50 Series Imagers
Features
Ti40
Ti45
Ti50
Ti55
•
•
•
•
Choice of 3 interchangeable lenses to cover every application
•
•
•
•
Large 5” high contrast color LCD for a clear picture independent of
lighting conditions
•
•
•
•
Fully radiometric for detailed temperature analysis and tracking
•
•
•
•
SmartFocus for best image quality and accurate temperature measurements
•
•
•
•
Windows® CE based menu structure for ease of use
•
•
•
•
Personalized instrument set-up for multiple use
•
•
•
•
CompactFlash memory cards to store over 1000 IR images plus fully
radiometric temperature data
•
•
•
•
SmartView reporting and analysis software included
•
•
•
•
180° articulating flexible lens to view images in every situation
AutoCapture for making intermittent problems visible
•
•
On-board analysis functions
•
•
User defined text annotations for simplified reporting
•
FT model
FT model
FT model
FT model
IR-Fusion blending thermal and visible light images to easily pinpoint
suspect components
FT model
Pictureinpicture
only
FT model
FT model
FT model
IR/Visible Alarm
FT model
FT model
FT model
Laser pointer for easy targeting
FT model
FT model
FT model
FT model
Flash and torch light for high quality images in dark environments
FT model
FT model
FT model
FT model
Complete package
The IR FlexCam thermal imagers are
delivered as a complete package.
46
•
Built-in visible light (digital) camera
Thermal Imaging
To find the best thermal imaging solution
for your application go to our Thermal
Imaging Web Selection Guide at
www.fluke.com/thermal_imaging
IR-Fusion™ Technology
IR-Fusion technology simultaneously
captures pixel-for-pixel infrared and visible light images and allows full image
optimization with 5 different on-camera
as well as software viewing modes. With
the integrated laser pointer visible on
the images, precise and accurate (faulty)
component identification is very easy.
Full IR
Picture-in-Picture
Alpha Blending
IR/Visible Alarm
Full Visible Light
Ti40 and Ti50 Series IR
FlexCam® Thermal Imagers
The thermal imagers for
professionals demanding the best
Specifications – Ti40 and Ti50 Series
Fluke
Ti40
Fluke Ti45
Fluke
Ti50
Fluke Ti55
Thermal imaging performance
Field of view (FOV)*
23° horizontal x 17° vertical
Spatial resolution (IFOV)*
2.60 mrad
1.30 mrad
Min focus distance*
0.15 m
≤0.09 °C
Thermal sensitivity (NETD) at 30 °C
Detector data acquisition/image frequency
≤0.08 °C
≤0.07 °C
30 Hz/30 Hz
Focus
≤0.05 °C
60 Hz/60 Hz
SmartFocus; single finger continuous focus
IR digital zoom
2x
Detector size
2x
160 x 120
2x, 4x. 8x
320 x 240
Detector type
Focal Plane Array, Vanadium Oxide (VOx) Uncooled
Microbolometer
Spectral band
8 µm to 14 µm
Fluke SmartView™ IR
analysis and reporting
software for Fluke IR
cameras.
Included with each Fluke IR
thermal imager, Fluke SmartView
software is a modular suite of
tools that annotates, views, edits
and analyzes IR images. It also
generates fully customizable and
professional-looking reports in
a few easy steps. The IR-Fusion
technology is full supported.
The software is easy to use for
the technician, yet delivers the
performance specialized thermographers require for advanced
analysis.
Visual Imaging performance (Fusion models only)
On-camera operating modes
Picture-in-Picture
Full thermal, full visual light or merged thermal-visual images
•
•
•
•
Smartview
only
•
•
•
Visible light camera
1280 x 1024 pixels, full color (1.3 megapixels)
Visible light digital zoom
2x
2x
2x, 4x
•
•
•
-20 °C to
600 °C
-20 °C to
350 °C
-20 °C to
600 °C
Visible color alarm above and below
Temperature measurement
Calibrated temperature range
-20 °C to
350 °C
1200 °C High temperature option
•
Accuracy
± 2 °C or 2 % (whichever is greater)
Measurement modes
Centerpoint, center box (area min/max, average)
•
•
•
•
Moveable spots/boxes
•
•
Isotherms, automatic hot and cold point detection
•
•
Emissivity correction
0.1 to 1.0 (0.01 increments)
Image presentation
Digital display
5” large high-resolution backlight LCD
Video output
RS170 EIA/NTSC or CCIR/PAL composite video
Palettes
Grayscale, grayscale inverted, blue red, high contrast, hot
metal, ironbow, amber, amber inverted
Optional lenses
54 mm Telephoto lens
High precision Germanium lens
Field of view (FOV)
9° horizontal x 6° vertical
Spatial resolution (IFOV)
0.94 mrad
Min focus distance
0.47 mrad
0.6 m
10.5 mm wide angle lens
High precision Germanium lens
Field of view (FOV)
42° horizontal x 32° vertical
Spatial resolution (IFOV)
4.9 mrad
Min focus distance
2.45 mrad
0.3 m
Image and data storage
Storage medium
Compact flash card (512Mb) stores over 1000 IR images
File formats supported
14 bit measurement data included.
Images: bmp, gif, jpg, png, tiff;
Data formats: comma separated (csv), tab separated (txt)
Interfaces and software
Interface
Compact flash card reader included
Included software
SmartView; Full analysis and reporting software
Laser (IR-Fusion models only)
Classification
Class II
Laser targeting
Laser dot visible on blended and visual image
Controls and adjustments
Set-up controls
Date/time, °C/°F, language, scale, LCD intensity
Image controls
Level, span, auto adjust (continuous/manual)
On-screen indicators
Battery status, emissivity, background temperature and
real time clock
Battery life: 3 hours continuous operation (2 hours on FT models)
Water and dust resistant: IP54
Size (HxWxD): 162 mm x 262 mm x 101 mm (6.378 in x 10.315 in x 3.9764 in)
Weight: 1.85 kg (4.07 lb)
Two-year warranty
Recommended accessories – Ti40 and Ti50 Series Imagers
103232
Anti-glare Hood
104543
Car Charger
Ti-SBC
Battery Charger
Ti-SBP
Rechargeable Battery Pack
Included accessories
AC adapter (for Ti45 and Ti55 only),
video cable, 512 MB compact flash
card, compact flash card reader and
USB cable, PCMCIA compact flash
card adapter, SmartView reporting and analysis software on CD, 2
rechargeable battery packs, battery
charger, neck strap, heavy duty carrying case and user manual on CD.
Ordering information
Fluke-Ti40-20 IR FlexCam
Thermal Imager
Fluke-Ti40FT-20 IR FlexCam
Thermal Imager
with IR-Fusion
Fluke-Ti45-20 IR FlexCam
Thermal Imager
Fluke-Ti45FT-20 IR FlexCam
Thermal Imager
with IR-Fusion
Fluke-Ti50-20 IR FlexCam
Thermal Imager
Fluke-Ti50FT-20 IR FlexCam
Thermal Imager
with IR-Fusion
Fluke-Ti55-20 IR FlexCam
Thermal Imager
Fluke-Ti55FT-20 IR FlexCam
Thermal Imager
with IR-Fusion
*For ordering information of optional
lenses check the Fluke web.
Thermal Imaging
47
Fluke Ti20
Thermal Imager
Everything needed for
everyday imaging
The Fluke Ti20 Thermal Imager is an unbeatable
solution for predictive maintenance and
troubleshooting.
• Complete imaging solution. The Ti20
Thermal Imager is packaged with all necessary
accessories including unlimited-use InsideIR™
companion software and professional training
materials.
• Lowest cost of ownership. An exceptional
value for a high performance imager, the Ti20
also offers affordable instrument service and
calibrations.
• Designed for industrial use. Rugged Fluke
construction; IP54-rated for use in dust and
moisture filled environments.
• Fast and easy inspection routing. Plan your
equipment inspection route, load it once into
the imager, and then follow the easy, oncamera instructions each time you perform
inspections (simply point, focus and pull the
trigger).
Specifications – Ti20 Thermal Imager
Detector
Detector type
128 x 96 thermal element focal plane array (FPA) uncooled microbolometer
NETD (thermal sensitivity)
≤ 0.2 °C at 30 °C
Thermal
Temperature range
-10 °C to 350 °C (14 °F to 662 °F)
Accuracy
± 2 °C or 2 % (whichever is greater)
Optical
Field of View (FOV)
20° horizontal by 15° vertical
Optical resolution (D:S)
75:1 or better
Target sighting
Single laser dot (Meets IEC Class 2 and FDA Class II requirements)
Typical thermal imaging
applications
Electric motors and pumps
Hot spots may be an early indicator
of motor winding problems. Elevated
temperatures can damage winding
insulation, resulting in operational
inefficiencies and premature motor
failure. An overheated motor may be
an indication of an underrated motor
in the application, insufficient cooling
or electrical power problems.
Bus bars and fuse boxes
Temperature differences between
phases may indicate unbalanced
loads, harmonics, component
problems, bad connections or
bad wiring. These conditions can
result in increased energy cost and
can damage cables or machines
or possibly cause fire. Even small
temperature differences between
phases should be investigated to
determine the root cause.
Controls and adjustments
Focus
Manual
Minimum focus distance
0.15 m (6 in)
Temperature scale
ºC or ºF selectable
Palettes
Grayscale, reverse grayscale, rainbow, ironbow
Measurement modes
Auto and manual
LCD backlight
On/off selectable
Adjustable emissivity
0.10 to 1.00 in 0.01 increments
Adjustable reflected background temperature
-50 °C to 460 °C (-58 °F to 860 °F)
Environmental
Ambient operating temperature
0 °C to 50 °C (32 °F to 122 °F)
Relative humidity
10 % to 95 % non-condensing
Storage temperature
-25 °C to 70 °C (-13 °F to 158 °F)
Water and dust resistant
IP54
Rotating machinery
Ball bearings showing an increased
temperature are an indication that
either the quality of the lubricant
is deteriorating or there is poor
alignment between the motor and
shaft. These problems can cause the
bearings to fail, or a motor or pump
to overheat.
Other
Display
Large color LCD
Storage capacity
50 images stored internally
Power
Rechargeable battery pack or six AA batteries
Battery life
Three hours continuous use
Image frame rate
30 Hz*, 9 Hz
Thermal analysis software
InsideIR™ (included) full-featured analysis and reporting software
(unlimited use; no per user license fees)
Size (HxWxD)
40.64 x 20.32 x 30.48 cm (16 in x 8 in x 12 in)
Weight
1.2 kg or (2.65 lbs)
Warranty
One-year
*Subject to U.S. export license compliance. Applicable outside the U.S. and Canada.
Recommended accessories – Ti20 Thermal Imager
Ti20-Visor
Sun Visor
Ti30-TBP
Rechargeable Battery Pack
Ti20-CC
Car Charger
For more information and detailed specifications, go to www.fluke.com/thermal_imaging
48
Thermal Imaging
Included accessories
Unlimited-use InsideIR PC software
for data storage, analysis and
reporting, ac/dc power adapter,
USB communication cable, hard
carrying case, soft-sided carrying
case, wrist strap, two (2) rechargeable battery packs, one (1) AA
battery carrier, training materials
and getting started guide.
Ordering information
Fluke-TI20 US Thermal Imager
North America
Fluke-TI20 INT Thermal Imager
Ampac
Fluke-TI20 INT 9 Thermal Imager
Ampac 9 Hz
Fluke Ti30™
Thermal Imager
Thermal imaging for the
industrial technician
The affordable Fluke Ti30™ Thermal Imager is an
unbeatable solution for predictive maintenance:
Complete imaging solution – The Ti30 Thermal
Imager is packaged with all necessary accessories,
unlimited-use InsideIR™ companion software, and
two days of professional thermography training.*
Low cost of ownership – An exceptional value
for a high performance imager, the Ti30 also offers
affordable instrument service and calibrations.
Designed for industrial use – Over five hours
of continuous-use battery life and the capacity to
store up to 100 images, allows for a full day of
uninterrupted inspections.
Fast and easy inspection routing – Plan your
equipment inspection route, load it once into
the imager, and then follow the easy, on-camera
instructions each time you perform inspections.
*U.S. and Canada only. Training package varies by country.
Does not include travel expenses.
Specifications – Ti30™ Thermal Imager
Detector
Detector type
120 x160 thermal element uncooled focal plane array microbolometer
NETD (Noise equivalent temp. difference)
200 mK
Thermal
Temperature range
-10 °C to 250 °C (14 °F to 482 °F)
Accuracy
±2 % or ±2 ºC (± 3 % or 3 °C from -10 to 0 °C)
Understanding
maintenance routing
Predictive maintenance (PdM)
programs rely on periodic
inspections of the critical assets
comprising a plant or facility. These
inspections range from visual
inspections to nondestructive
testing performed using a variety
of technologies. To optimize a
PdM program, one must develop a
series of routes, determining the
equipment to be inspected, the
frequency of those inspections,
and the sequence or physical
course for each.
With the Fluke Ti30™ Thermal
Imager, images taken on a
planned inspection route can be
combined with location names
and temperature data and
uploaded to the camera for use
as a “routing guide.” The user is
prompted to go to each location
on the route to take images during
subsequent inspections—improving
accuracy. New images can easily
be compared to previous scans
using InsideIR software (included),
helping to identify potential
problems before they cause failure.
To learn more about predictive
maintenance with the Fluke
Ti30™ Thermal Imager, go to
www.fluke.com/thermal_imaging
Optical
Optical resolution
90:1
Slit response optical resolution
225:1
Minimum diameter measurement spot
7 mm (0.27 in) at 61cm (24 in)
Field of view (FOV)
17 º horizontal x 12.8 º vertical
Target sighting
Single laser dot (Meets IEC Class 2 & FDA Class II requirements)
Controls and adjustments
Focus
Focusable, 61cm (24 in) to infinity
Temperature scale
ºC or ºF selectable
Palettes
Gray, ironbow or rainbow
Measurement modes
Automatic, semi-automatic or manual
LCD backlight
Bright, dim, off-selectable
Adjustable emissivity
0.10 to 1.00 by 0.01
Reflected background temperature
-50 ºC to 460 ºC (-58 ºF to 860 ºF)
Environmental
Ambient operating temperature
-10 ºC to 50 ºC (14 ºF to 122 ºF)
Relative humidity
10 to 90 % non-condensing
Storage temperature
-25 ºC to 70 ºC (-13 ºF to158 ºF) [without batteries]
Other
Storage capacity
100 images
Power
Rechargable battery pack or 6AAs (not included)
Battery life
Minimum 5 hours continuous use
Image frame rate
20 Hz*, 9 Hz
Thermal analysis software
InsideIR (included)
PC software operating systems
Microsoft® Windows® 2000® or XP®
Weight (includes batteries)
1 kg (2.2 lb)
Warranty
1 year (U.S. only)
*Subject to U.S. export license compliance. Applicable outside the U.S. and Canada.
Store infrared images
in InsideIR software
Included accessories
Unlimited-use InsideIR PC software
for data storage, analysis and reporting, docking station with universal
power adapter and USB connection,
hardshell carrying case, USB field
cable, rechargeable battery pack,
sun visor, interactive CD, training
presentation CD, carrying pouch,
wrist strap, and quick reference card.
Optional
NIST Calibration Certificate
Ordering information
Fluke-Ti30 US Thermal Imager/
North America
Fluke-Ti30 EL Thermal Imager/
Latin America
Fluke-Ti30 EL/9 Thermal Imager/
Latin America,
9 Hz Version
To request a demonstration, call
1-800-44-Fluke (1+425-446-5500
outside the U.S.) or visit
www.fluke.com/demo
For more information and detailed specifications, go to www.fluke.com/thermal_imaging
Thermal Imaging
49
FlexCam™ TiR4, TiR3, and
TiR2 IR Thermal Imagers
The expert’s choice for
building diagnostics
Fluke TiR2, TiR3, TiR4
Fluke TiR2/FT, TiR3/FT, TiR4/FT
The new Fluke TiR2, TiR3 and TiR4 thermal
imagers are for professionals demanding the
best and most thorough solutions in building
diagnostics applications. The Fluke TiR-Series
provides the industry’s largest LCD to view
on-camera images, augmented with the
innovative IR-Fusion™ technology to better
pinpoint building problems. IR-Fusion is the
overlay of IR and visible images, allowing one
to clearly identify critical points within the
thermal image.
• Industry leading thermal sensitivity
(≤ 0.050 °C NETD on TiR4) (0.07 °C
NETD on TiR2 and TiR3) provides solid
resolution, and ultra high-quality images.
• IR-Fusion technology automatically merges
visual and thermal images pinpointing
trouble areas quicker by automatically
relating thermal images with the real
world. (included with Flk-TiR/FT series,
optional with Flk-TiR series)
IR InSight XS & XST
Thermal Imagers
The New Fluke IR InSight XS &
XST portable infrared imagers
combine outstanding image quality
and thermal sensitivity. They are
optimized for low contrast thermal applications encountered in
building sciences applications and
show problems that other infrared
cameras cannot. These easy to use
cameras include SmartView™ software to customize and prepare professional infrared survey reports.
•
•
•
•
•
•
•
•
The 180° articulating lens is great for viewing around obstructions.
The 5” high resolution, high contrast display is the biggest display in the industry.
320 x 240 focal plane array and 20 mm high quality Germanium lens with
continuous single finger focus provide exceptional image resolution (Model TiR2
available with 160 x 120 only).
• SmartView™ professional report writing software generates fast, easy customizable
reports including rich image analysis.
• The intuitive operation with on-camera Windows CE interface makes it easy to use.
160x120 focal
plane array
0.07 °C (Industry
leading thermal
sensitivity (≤ NETD)
Simple robust
one-button
operation
3.5-inch, 30 bit color,
high resolution,
high-contrast display
SmartView professional
report writing software
TiR2, TiR3 and TiR4
Included accessories
AC adapter (for TiR2 and TiR4 only),
video cable, 512 MB compact flash
card, compact flash card reader and
USB cable, PCMCIA compact flash
card adapter, SmartView reporting
and analysis software on CD, 2
rechargeable battery packs, battery
charger, neck strap, heavy duty carrying case and user manual on CD.
InSight XS and XST
Included accessories
Serial/USB download adapter kit/
cable, SmartView reporting software
on CD, 2 rechargeable battery
packs, battery charger, neck strap,
heavy-duty carrying case, user
manual on CD.
IR-Fusion™ Technology
Infrared and visible light images fused
together on one display.
IR-Fusion Technology captures a visible
light image in addition to the infrared
image and takes the mystery out of IR
image analysis. It helps to better identify
and report suspect areas and enable the
repair to be done right the first time.
• Full IR – for analyzing very high resolution IR imaging. Detect the smallest
temperature variations to track down the
origin of problems and fully document
the extent of remediation. Full IR images
are automatically linked to full visible
light images.
50
Thermal Imaging
•
Picture-in-Picture – for creating an IR
“window” surrounded by a visible light
frame to easily identify thermal anomalies, while maintaining a frame of reference with surroundings.
• Alpha blending – for combining visible
and infrared images together in any ratio
to create a single image with enhanced
detail that will help in precisely locating
problems.
• IR/visible alarm – for displaying only
temperatures that fall above, below, or in
between a specified range as IR image,
leaving the rest of the scene as a fully
visible light image.
• Full visible light – a bright, detailed
pixel-for-pixel reference image of subject
areas for documentation and reporting.
Ordering information
Flk-TIR2-20
Flk-TIR2/FT-20
Flk-TIR3-20
Flk-TIR3/FT-20
Flk-TIR4-20
Flk-TIR4/FT-20
Flk-INSXT-20
Flk-INSXS-20
IR Flexcam BD
Thermal Imager
IR Flexcam BD
Thermal Imager
with IR-Fusion
IR Flexcam BD
Thermal Imager
IR Flexcam BD
Thermal Imager
with IR-Fusion
IR Flexcam BD
Thermal Imager
IR Flexcam BD
Thermal Imager
with IR-Fusion
IR InSight, 20MM,
XST
IR InSight, 20MM,
XS
Fluke 570 Series
Infrared Thermometers
The predictive maintenance
professional’s precision diagnostic tool
The Fluke 572, 574 and 576 non-contact thermometers
are ideal professional diagnostic tools for maintenance
professionals requiring the most accurate temperature readings at all distances. Predictive maintenance professionals
requiring analysis and documentation use the 574 or 576
models, with 100-point data logging and digital photographs
(576 only) with the included software for graphing and
analysis for follow-up reporting and documentation.
• Backlit display for poorly lit areas
• Displays last ten temperature readings on bar graph for easy reference
• Enhanced optics (distance to spot ratio up to 60:1) allow measurements
of smaller objects from farther away
• Coaxial three-dot laser sighting system highlights the true diameter of
measurement spots at all distances
• Adjustable emissivity setting (all models) and 30 pre-set
common material values (574, 576) for more accurate
measurements
• 100-data point logging for documentation (574, 576)
• Customizable log names, alarms, and emissivity
values for personalized measurements (574, 576)
• Software to log, graph, and analyze temperature
data via RS-232 (574) connection or USB
connection (576, includes photo viewing feature)
• Instantly captures photographs of measurement
locations along with temperature and date-time
information for improved documentation and
maintenance follow-up (576)
• Close-focus option available for specialized
applications
• Durable hard plastic storage case
Specifications – 572, 574 and 576 IRTs
Models
Fluke-572
Temperature range
D:S (Distance to Spot size)
Fluke-574
Fluke-574-NI
-30 °C to 900 °C (-25 °F to 1600 °F)
60:1 [50:1 with close focus option (close focus not available with NI model)]
Laser sighting
3-dot, coaxial, extra-bright
Emissivity
Adjustable
Adjustable, plus
table of 30 preset
values
± 0.75 % of reading or (± 0.75 °C (± 1.5 °F) whichever is greater
(assumes ambient operating temperature of 23 °C [73 °F])
Accuracy
Response time
Yes
LCD backlit
Yes
MAX, MIN temperatures
Yes
No
Yes
Recall last reading
Audible/visible LO alarm
Yes
Yes
Yes
Yes
Yes
Audible/visible HI alarm
Yes
No
Yes
Bar graph display
Yes
100 points data logging
No
Yes
Yes
Yes
Data graphing software
(Windows 2000, XP compatible)
No
Yes
Yes
Yes
Photo viewing software (Windows
2000, XP, NT compatible)
No
No
No
Yes
26 images (640 x 480 pixel)
No
No
No
Yes
100 images (320 x 240 pixel)
No
No
No
Yes
Image file format (.jpg)
No
No
No
Yes
Protective hard case
Weight
Dimensions
Power
Yes
472 g (1 lb, 1 oz)
2 AA batteries
Warranty
Additional options/accessories
480 g (1 lb, 1 oz)
480 g (1 lb, 1 oz)
16.7 cm x 5 cm x 19.8 cm (6.58 in x 1.97 in x 7.80 in)
2 AA batteries/
AC adapter
2 AA batteries/
AC adapter
580 g (1 lb, 1 oz)
16.7 cm x 5 cm x
23.8 cm (6.58 in x
1.97 in x 9.57 in)
2 AA batteries/
USB
Two-years, conditional
Nylon holster, NIST
Traceable Calibration
Certificate
Nylon holster,
NIST Traceable Calibration Certificate,
Analog cable
For more information and detailed specifications, go to www.fluke.com/thermometers
When safety is a
concern and data
logging and
downloading are
required, the Fluke
574 Nonincendive (NI) model
thermometer is the product to
choose. It has the same great features as the standard 574 model
thermometers with the extra confidence of a Factory Mutual approval
for use in hazardous environments.
Class I, Division 2, Groups A, B, C, D: Class I,
Zone 2 IIC; T4 Ta=50 °C when used with 1.5 V
alkaline batteries.
Fluke 576 Photographic
Non-contact Thermometer
The Fluke 576 thermometer measures temperature while digitally
photographing the measured area
and its surroundings. The 576
allows you to:
• Ensure consistency of repeated
measurements by using prior
photos as a reference.
• Position the laser sighting to
assure the measurement area is
the same.
• Create customized company
reports with the software, data
and photos, using standard
Windows programs.
Included accessories
2 AA batteries, operator’s guide
(on CD), durable hard case.
thermocouple K probe (574, 576),
power supply (574), RS-232 data
cable (574), USB 1.1 cable (576),
data graphing, storage and analysis
software on CD (574, 576)
Ordering information
250 mSec
Display hold (7 seconds)
DIF, AVG temperatures
Fluke-576
574-NI
Nonincendive
Thermometer
Fluke-572
Fluke-572-CF
Fluke-574
Fluke-574-NI
Fluke-574-CF
Fluke-576
Fluke-576-CF
Precision Infrared
Thermometer
Precision Infrared
Thermometer with
Close Focus Option
Precision Infrared
Thermometer
w/Logging SW
Precision Infrared
Thermometer
w/Logging SW
Nonincendive
Precision Infrared
Thermometer
w/Logging SW
Close Focus
Precision,
Photographic
Infrared
Thermometer
w/Logging SW
Precision,
Photographic
Infrared
Thermometer
w/Logging SW
Close Focus
Thermometers
51
Fluke 54 Series II
Thermometer
Lab accuracy in a field thermometer
The Fluke 51, 52, 53 and 54 Series II Thermometers offer
high accuracy with fast response times to quickly capture
your measurement and show trends. Choose from four models
to get the functionality, thermocouple support and data logging
you need.
All models offer:
• Laboratory accuracy: ± (0.05 % + 0.3 °C)
• Large backlit dual display presents all the information
•
•
•
•
•
•
•
you need at a glance
MIN, MAX, and AVG—with time references—captures
major events
Electronic Offset function maximizes overall accuracy by
allowing you to compensate for thermocouple errors
Supports a wide range of thermocouple types
Temperatures displayed in °C, °F, or Kelvin (K)
Splash and dust resistant case
Sleep mode to increase battery life
(typical 1000-hour life)
Battery door allows easy battery replacement without
breaking the calibration seal
Powerful data logging capabilities
The Fluke 53 and 54 Series II can log up to 500 points of
data to internal memory.
• User-adjustable recording intervals
• Real-time clock captures the exact time of day
of events
• Recall function allows logged data to be easily reviewed
on the meter display
• For further analysis and graphing, data can be
exported to optional FlukeView® PC software using
the thermometer’s IR communication port
Fluke 561 HVACPro
Two-in-one infrared and
contact thermometer for
HVAC/R professionals
The Fluke 561 HVACPro
combines the temperature measurement
functions that professionals need for most
HVAC jobs, all in one
tool. It measures
both IR and contact
temperature, replacing
several hundred
dollars worth
of equipment.
• IR thermometer
for measurements
up close or at a
distance, without a ladder
• Contact thermometry capability,
compatible with all standard
mini-connector K-type thermocouples, preserves your investment in thermocouples
• Velcro® pipe probe for superheat
and sub-cooling and other contact and ambient measurements
• MIN, MAX and DIF functions help
you quickly identify problems
• Scan large areas or small objects
quickly and efficiently
Specifications – 51, 52, 53 and 54 Series II
Feature
51
52
53
54
Thermocouple types
K,J,T,E
K,J,T,E
K,J,T,E,N,R,S
K,J,T,E,N,R,S
Number of inputs
Single
Dual
Single
Dual
Relative time
Relative time
Time of day
Time of day
Time stamp
Temperature measurement accuracy
(for temperatures above -100 °C)
Type J,K,T,E,N: ± [0.05 % + 0.3 °C (0.5 °F)] Type R,S: ± [0.05 % + 0.4 °C (0.7 °F)]
Measurement range
(depending on thermocouple type)
Display resolution
-250 °C (-418 °F) to 1767 °C (3212 °F)
0.1 °C /°F/K < 100°
Operating temperature
1° °C/°F/K > 1000°
-10 °C to 50 °C (14 °F to 122 °F)
Storage temperature
-40 °C to 60 °C (-40 °F to 140 °F)
Humidity
0 % to 90 %; 0 °C to 35 °C (32 °F to 95 °F), 0 % to 70 %;
0 °C to 50 °C (32 °F to 122 °F)
Weight
400 g (14 oz)
Size (HxWxD)
17.3 cm x 8.6 cm x 3.8 cm (6.8 in x 3.4 in x 1.5 in)
Battery
3 AA batteries; typical 1000-hour life
Recommended accessories – 51, 52, 53 and 54 Series II Thermometers
TPak
ToolPak Meter
Hanging Kit
See page 71
80PK-8
Pipe Clamp
Temperature Probe
See page 68
80PK-22
SureGrip™ Immersion
Temperature Prove
See page 68
80PK-25
SureGrip™ Piercing
Temperature Probe
See page 68
FVF-SC1
FlukeView Forms
Software
See page 65
For more information and detailed specifications, go to www.fluke.com/thermometers
52
Thermometers
Included accessories
Fluke 50 Series II includes:
80PK-1 Bead Thermocouple(s),
batteries, overview manual and
instructional guide on CD-ROM.
Fluke 561HVACPro includes:
Infrared thermometer with contact
thermometer capabilities, thermocouple K-type Velcro® pipe probe,
hand-carrying case and user manual
with HVAC measurement guide.
Ordering information
Fluke-51-2
Fluke-52-2
Fluke-53-2
Fluke-54-2
Fluke-561
Digital Thermometer,
Single Input
Digital Thermometer,
Dual Input
Datalogging
Thermometer,
Single Input
Datalogging
Thermometer,
Dual Input
HVACPro Thermometer
Fluke 68 Infrared
Thermometer
Measuring temperature in hard-to-reach,
hot, rotating or dangerous situations
Reach for a rugged Fluke IR thermometer. You get easy and
safe temperature readings in less than a second.
These handheld portable tools enable professionals to
research heating and ventilation problems, monitor the
status of electrical motors and electrical panels and diagnose
car malfunctions with ease.
New! Fluke 62 Mini
Infrared Thermometer
• Temperature measurement range
up to 500 ºC (932 ºF)
10:1 optics
Accurate to within ± 1.5 %
of reading or ± 1.5 °C
• MAX temperature display
• Laser sighting
• Backlit display
•
•
Fluke 63, 66 and 68 pistol grip
infrared thermometers
The new Fluke 63, 66 and 68 pistol grip thermometers offer
an easy to use solution for temperature measurement in
hard-to-reach, hot, rotating or dangerous situations.
• Wide temperature range and quick response time
• Superb optics for measuring temperature of surfaces from
a distance
• Laser sighting
• Adjustable emissivity (66/68 only) for more
accurate temperature measurement
Intrinsically safe Fluke 68 version available (see page 45)
Specifications – 561, 61, 62, 63, 66, 68
561
Temperature
range
Emissivity
61
Adjustable with
three settings:
Low (0.3),
Medium (0.7),
High (0.95)
Optical resolution (D:S)
12:1
Laser sighting (class II)
Single point laser
Response
time
500 mSec (95 %
of reading)
Repeatability
63
8:1
10:1 at 80 %
energy
< 500 mSec
< 500 mSec
Digitally adjustable
(from 0.1 to 1.0 by 0.01)
12:1
30:1
50:1
< 0.5 second (95 % of reading)
25 mm (1 in)
0.1 °C (0.1 °F)
of reading
24 mm (0.9 in)
0.2 °C (0.5 °f)
± 0.5 % of
± 2 °C or
reading or ± 1 °C ± 2 %, whichever
(± 2 °F), whichis greater
ever is greater
18 mm (0.7 in)
0.1 °C (0.1 °F)
button operation
Easy targeting with
bright laser
• Shock-absorbing
molding increases
ruggedness
•
0 °C to 50 °C (32 °F to 120 °F)
10 to 90 % RH
10 to 90 % RH
non-condensing, noncondensing, at
at < 30 °C (86 °F) < 50 °C (120 °F)
Storage
temperature
-20 °C to 65 °C
(-25 °F to 150 °F)
Dimensions
17. 8 cm x 16.5 190 mm x 51 mm 152 mm x 101 mm
cm x 5.1 cm (7 in x 41 mm (7.5 in x x 38 mm (6 in x
x 6.5 in x 2 in)
2 in x 1.6 in)
4 in x 1.5 in)
Weight
330 g (11.6 oz)
Power
2 AA batteries
(alkaline or NiCD)
Battery life
(alkaline)
-20 °C to 60 °C
(-4 °F to 140 °F)
without battery
341 g (0.75 lb)
10 to 90 % RH non-condensing, at < 30 °C (86 °F) ambient
-20 °C to 65 °C
(-4 °F to 150 °F)
without battery
-20 °C to 60 °C (-13 °F to 158 °F) without battery
Included accessories
200 mm x 160 mm x 55 mm (8 in x 6 in x 2 in)
200 g (7 oz)
320 g (11 oz)
12 hours
10 hours with
laser and backlight on, 40 hours
with laser and
backlight off
20 hours with laser and backlight
on 50 % 40 hours with laser and
backlight off
Up to 2 m (6 ft)
1 m (3 ft)
Up to 2 m (6 ft)
Up to 2 m (6 ft)
Up to 5 m (15 ft)
Up to 8 m (25 ft)
Two-year limited
One-year
Two-year limited
Two-year limited
Two-year limited
Two-year limited
80PR-60
Temperature Probe
(66/68 only)
See page 69
H6
Meter Case
(63/66/68 only)
See page 70
LVD1
Volt Light
(all models)
See page 64
C510
Meter Case
(61 only)
See page 70
Fluke 61 includes: instruction sheet
and 9 V battery.
Fluke 62 includes: storage pouch
and instruction sheet.
9 V alkaline or customer supplied NiCd battery
Recommended accessories – 60 Series Thermometers
Fluke 61 Infrared
Thermometers
• Easy to use one
± 0.5 % or < ± 1 °C (± 2 °F), whichever is greater
Relative
humidity
Warranty
68
Offset single point laser
Ambient
operating
temperature
Typical
distance to
target
66
-30 °C to 500 °C -32 °C to 535 °C -32 °C to 600 °C -32 °C to 760 °C
(-20 °F to 932 °F) (-25 °F to 995 °F) (-25 °F to 1100 °F) (-25 °F to 1400 °F)
Fixed at 0.95
Minimum
usable spot
size
Resolution
62
-40 °C to 550 °C -18 °C to 275 °C
(-40 °F to 1022 °F) (0 °F to 525 °F)
Fluke 63, 66, 68 includes: carrying
case, hand strap, instruction manual
and 9 V battery.
Ordering information
Fluke-61
Fluke-62
Fluke-63
Fluke-66
Fluke-68
Fluke-68IS
Infrared Thermometer
Mini Infrared
Thermometer
Infrared Thermometer
Infrared Thermometer
Infrared Thermometer
Intrinsically Safe
Infrared Thermometer
C90
Meter Case
(61 only)
See page 70
For more information and detailed specifications, go to www.fluke.com/thermometers
Thermometers
53
Fluke 975 AirMeter™
Five powerful tools in one, with
simple one-touch air velocity
The Fluke 975 test tool combines five powerful air
quality tools into one. Identify and diagnose indoor
air quality issues quickly and easily with one rugged,
handheld device. The Fluke 975 measures and simultaneously displays temperature, humidity, CO2 and CO.
At the press of a button, it quickly measures air flow
and percentage of outside air.
• Simultaneously measures, logs, and displays
temperature, humidity, CO2, and CO on a bright,
backlit LCD display
• One-touch air flow and velocity with available probe*
• Wet bulb and dew point temperature
• % of outside air calculation
• CO2 and CO field calibration feature
• Automatically compensates for barometric pressure
changes
• Min/Max/Average on all measured and calculated
readings
• Audible and visual threshold alarms
• Extensive discrete or continuous data logging
capacity, downloadable to PC via USB interface
Also available:
Fluke-975CK AirMeter Calibration
Kit includes the gases and tools
necessary to keep your Fluke 975
AirMeter calibrated.
Fluke-975AP AirMeter
Velocity Probe for use
with Fluke 975 AirMeter.
*Included with Fluke 975V, optional with Fluke 975
Temperature
Relative humidity
Range
Display Resolution
-20 °C to 50 °C
(-5 °F to 122 °F)
0.1 °C (0.1 °F)
Accuracy
± 0.9 °C/± 1.62°F from 40 °C to 60 °C ± 0.5 °C/±
1.00°F from 5 °C to 40 °C ± 1.1 °C/± 1.98 °F from
-20 °C to 5 °C
10 % to 90 % RH
non-condensing
1%
50.0 fpm to 3000 fpm
0.25 m/sec to 15 m/sec
1 fpm (0.005m/sec)
±4 % or 4 fpm* ±4 % or 0.02 m/sec* whichever is
greater *Accuracy specification only valid for velocity
readings above 50 fpm.
CO2
0 to 5000 ppm
1 ppm
Warm up time 1 min (5 minutes for full specification)
2.75 % + 75 ppm
CO
0 to 500 ppm
1 ppm
± 5 % or ± 3 ppm, whichever is greater, @ 20 °C
and 50 % RH
Air velocity
± 2 % RH (10 % RH to 90 % RH)
Fluke 902 True-rms HVAC Clamp Meter
Get more done
Heating, ventilation, air conditioning (HVAC) technicians require a
service tool that can consistently keep up with their demands. The
Fluke 902 expands the existing line of quality Fluke clamp meters by
delivering the features necessary to diagnose and repair HVAC systems.
Combined with True-rms technology and a CAT III 600 V rating, the
Fluke 902 helps technicians do their jobs safely and accurately.
• Designed for HVAC applications with capacitance, dc current (µA), and
temperature measurements
• Small body and jaws fit perfectly in your hand and into tight places
• Handy ‘Display Hold’ button keeps measurements on the display
• Meter controls are positioned so current measurements can be done
with one hand (index finger on clamp opening lever and thumb on
rotary switch)
Range
Voltage dc
0 - 600 V
1 % ± 5 counts
Voltage ac (True-rms)
0 - 600 V
1 % ± 5 counts (50/60 Hz)
Current ac (True-rms)
0 - 600 A
2.0 % ± 5 counts (50/60 Hz)
Current dc
0 - 200 µA
1.0 % ± 5 counts
Resistance
0 - 9999 W
1.5 % ± 5 counts
Continuity
7247001)
45 (S/N < 7211001)
45 (S/N > 7211001)
73 and 73-II
863/865/867/867B
83/85/87 (S/N > 65650001)
87-IV/89-IV/187/189/
83-III/85-III/87-III/87E-III/83V/87V
23-III/77-III/26-III/79-III/175/177/179
111/112
712/713/714/715/716/717/718
724/725
1577/1587
1503/1507
formula removes surface dirt,
oil and grease
• Safe on rubber
• Safe to the
environment
• Comes in
two sizes:
6-pack (MC6)
and 50-pack
(MC50)
Verification tools
•
Model
21/23/75/77-II
New! MeterCleaner Wipes
• Industrial strength cleaning
Fuse requirements
P/N 871173; 630 mA 250V fuse
P/N 892583; 15 A 600 V fuse
P/N 871173; 630 mA 250 V fuse
P/N 803293 11 A 1000 V fuse
P/N 871207; 1 A 600 V fuse
P/N 892583; 15 A 600 V fuse
P/N 871173; 630 mA 250 V fuse
P/N 871202; 3A 600 V fuse
P/N 892583; 15A 600 V fuse
P/N 943121; 440 mA 1000 V fuse
P/N 803293; 11A 1000 V fuse
P/N 871181; 500 mA 250 V fuse
P/N 892583; 15 A 600 V fuse
P/N 871181; 500 mA 250 V fuse
P/N 943121; 440 mA 1000 V fuse
P/N 803293; 11 A 1000 V fuse
P/N 892583; 15 A 600 V fuse
P/N 943121; 440 mA 1000 V fuse
P/N 803293; 11 A 1000 V fuse
eliminates noise and
false signals
New SmartTone™
analog toning precisely isolates individual wire pairs
Locates cables safely
and effectively on
active networks
Verifies twisted-pair
installation with visual end-to-end
continuity test
Identifies, diagnoses, and troubleshoots datacom/telecom services
Test the integrity of UTP, Coax,
phone and security cabling
using known standards.
MicroScanner Pro
• The essential cable verification tester
• Measures length and distance to
•
•
•
•
•
fault via true TDR (Time Domain
Reflectometry)
Pinpoints opens, shorts, reversed,
crossed and split pairs
Tests UTP, STP and coax cables
Flashes hub and switch port lights
Identifies active networking hubs and
detects speed/duplex settings
Analog tone generator with four song
selections
MicroMapper
P/N
P/N
P/N
P/N
P/N
803293; 11 A 1000 V fuse
686527; 125 mA 250 V fuse
2002234 (qty. 1); 50 mA 250 V fuse
943121; 440 mA 1000 V fuse
2279339; 315 mA, 1000 V fuse
• The fast, comprehensive
LAN wiremap checker
• Tests twisted-pair cables for
opens, shorts, crossed pairs,
split pairs, or any miswires
Verifies correct pin outs,
wiremap
•
For more information and detailed specifications, go to www.fluke.com/accessories
Accessories
71
What’s New from Fluke
The new products to help keep
you up and running
Fluke Ti20 Thermal Imager
The Fluke Ti20 Thermal Imager is an unbeatable solution for
predictive maintenance and troubleshooting.
• Includes unlimited-use InsideIR™ companion software
and professional training materials.
• Designed for industrial use. IP54-rated for use in dust
and moisture filled environments.
• Follow easy, on-camera instructions each time you perform
inspections (simply point, focus and pull the trigger) for fast
and easy inspection routing.
For more information, see page 48.
Fluke 117 Electrician’s Digital Multimeter
The Fluke 117 is one of four new compact digital multimeters.
Choose from models specifically designed for Commercial Electricians,
HVAC/R Technicians and Field Service Technicians. Engineered by
you, designed by Fluke.
• VoltAlert™ Technology for integrated non-contact voltage detection.
• AutoVolt feature for automatic ac/dc voltage selection.
• LoZ: low input impedance prevents false readings due to
“ghost voltage”.
For more information, see page 17.
Fluke 975 AirMeter™
The Fluke 975 AirMeter test tool raises
indoor air monitoring to the next level by
combining five powerful tools in one, rugged
and easy-to-use handheld device.
The Fluke 975 measures:
• Temperature
• Relative Humidity
• Air Velocity
• CO2
• CO
For more information see page 54.
Your authorized Fluke distributor
Fluke 8845A and 8846A 6.5
Digit Precision Multimeters
• 6.5 digit resolution
• Graphical display
• Basic V dc accuracy of up to 0.0024 %
• 100 uA to 10 A Current
• 10 ohm to 1 Gohm resistance
• 2x4 Wire ohms measurement technique
• Frequency, period, capacitance and
RTD temperature measurements
• Analytical modes; TrendPlot,™
Histogram and Statistics
• USB device port, for memory storage
devices
• RS-232, IEEE-488 and LAN interfaces
For more information, see page 21.
Fluke. Keeping your world
up and running.™
Fluke Corporation
PO Box 9090,
Everett, WA USA 98206
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. (800) 443-5853 or
Fax (425) 446-5116
In Europe/M-East/Africa
(31 40) 2 675 200 or
Fax (31 40) 2 675 222
In Canada (800) 36-FLUKE or
Fax (905) 890-6866
From other countries
+1 (425) 446-5500 or
Fax +1 (425) 446-5116
Web access: http://www.fluke.com
©2006 Fluke Corporation.
All rights reserved. Specifications
subject to change without notice.
LEM is a trademark of LEM Holding S.A.
Corporation. Microsoft is a registered
trademark of Microsoft Corporation.
Printed in U.S.A. 11/2006
1274458 C-US-N Rev O
Volume 37
工商网监
湘ICP备2023018690号
