1206F-100K-01

www.fastrongroup.com 1206 F 85 °C AEC-Q200 RoHS Halogen Free Mechanical Shock Vibration Proof Engineer’s Kit : EK-1206F-X 2.50 max 1.95 1.60 max 0.51 1.8 Epoxy flat top 1.0 0.51 1.57 Typical Ls vs Current (I) Part No Single layer (typ) 100 Inductance (µH) 18 µH 10 10 µH 5.6 µH 1.5 µH 1 0.1 0.01 45 0.1 1 Current (A) 10 Typical Q vs Frequency (ƒ) 40 Q Factor 35 30 20 10 5 100 1 10 Frequency (MHz) Inductance fL Tol Q fQ L (µH) (MHz) ± (%) min (MHz) (MHz) 1.0 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 47 100 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 2.5 2.5 2.5 2.5 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 25 25 25 25 25 25 25 25 25 25 25 25 18 16 16 18 18 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 2.5 2.5 2.5 2.5 300 min 240 min 200 min 200 min 190 min 160 min 160 min 140 typ 120 typ 110 typ 100 typ 100 typ 90 typ 75 typ 75 typ 25 typ 13 typ 100 18 µH 10 µH 5.6 µH 1.5 µH 1 0.1 1 10 100 Frequency (MHz) SRF 1000 • All dimensions in mm DCR Rated DC max Current (Ω) (mA) 0.98 1.2 1.2 1.3 1.4 1.5 1.9 2.2 2.4 2.8 3.1 4.0 4.6 8.2 9.0 11.1 21 350 320 320 300 300 280 280 280 260 240 220 200 200 160 130 80 80 Revision date: 11 Jan 2022 Remarks: - Unlisted inductance values available upon request. - 2% and 5% available upon request. - All are AEC-Q200 Standard approved EXCEPT *. Typical Ls vs Frequency (ƒ) 10 Recommended layout for solder pads 0.65 Ref SPQ: Taped / Reel 1000 [-08] 2000 [-01] 7500 [-04] 15 0 1206F-1R0K-YY 1206F-1R5K-YY 1206F-1R8K-YY 1206F-2R2K-YY 1206F-2R7K-YY 1206F-3R3K-YY 1206F-3R9K-YY 1206F-4R7K-YY 1206F-5R6K-YY 1206F-6R8K-YY 1206F-8R2K-YY 1206F-100K-YY 1206F-120K-YY * 1206F-150K-YY * 1206F-180K-YY 1206F-470K-YY * 1206F-101K-YY 0.10 ~ 0.40 Core Material: Ferrite 1.5 µH 10 µH 5.6 µH 18 µH 25 Inductance (µH) Chip Inductors for RF Applications 2.18 3.20 (Wire wound - open) 4.00 max 1.0