04688-00023-00

tesa® 4688 Product Information Standard polyethylene coated cloth tape tesa® 4688 is a standard grade polyethylene coated cloth tape. It is based on a 55 mesh woven PET/rayon fabric backing coated with a pressure sensitive natural rubber adhesive. tesa® 4688 is a typical repairing tape, convenient for a variety of needs with very good handling characteristics. Features: • • • • • Strong adhesion, even on rough surfaces Waterproof Easy to unwind Total halogen content < 1000 ppm; Total sulphur content < 1000 ppm Main Application • • • • • • Marking, masking, packaging, protecting, fastening, closing Bonding of construction films Closing of cartons, tins, etc. Fixing of wires Bundling of cables Splicing of films, marking of parts during maintenance in nuclear power plants Technical Information (average values) The values in this section should be considered representative or typical only and should not be used for specification purposes. PE extruded cloth 260 µm natural rubber 9% Adhesion to • steel Properties • Hand tearability • Straight tear edges • Certified according to • Tensile strength • Temperature resistance (30 min) • Mesh • Dielectric breakdown voltage 52 N/cm 110 °C 55 count per square inch 2900 volt 4.5 N/cm TLV 9027/01/06 for use in nuclear power plant Evaluation across relevant tesa® assortment:   • Abrasion resistance • Water resistance  very good     Additional Information Meets requirements of LV 312-1 dielectric strength 7500 Volts (3 layer) For latest information on this product please visit http://l.tesa.com/?ip=04688  good      medium      low Page 1 of 2 – as of 08/10/21 – en-US Technical Data • Backing material • Total thickness • Type of adhesive • Elongation at break tesa® 4688 Product Information Disclaimer For latest information on this product please visit http://l.tesa.com/?ip=04688 Page 2 of 2 – as of 08/10/21 – en-US tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All information and recommendations are provided to the best of our knowledge on the basis of our practical experience. Nevertheless tesa SE can make no warranties, express or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. Therefore, the user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical support staff will be glad to support you.