04329-00008-01

productinformation tesa® 4329 PV1 Finely creped paper mask tape The product is thin and flexible and, therefore, suitable for all general masking applications, as well as oven drying applications up to a temperature of 70 °C. Main Application ▪ ▪ ▪ ▪ Masking Lacquering work Good flexibility for curves Can be used on painted metal, rubber, glass and chrome parts Technical Data ▪ ▪ ▪ ▪ Backing material Total thickness Type of adhesive Adhesion to steel slightly-creped paper 125 µm natural rubber 2.8 N/cm ▪ ▪ ▪ Elongation at break Tensile strength Temperature resistance ▪ ▪ Sharp colour edge Conformability 10 % 33 N/cm 70 °C Properties ▪ ▪ ▪ Hand tearability Easy to remove Paint anchorage very good good medium low Page 1 of 1 - As of 31/10/2019 - en Evaluation across relevant tesa® assortment: yes For latest information on this product please visit http://l.tesa.com/?ip=04329 tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical support staff will be glad to support you.