BMP51-KIT-LS

BMP®51 and BMP®53 Materials BradyID.com/bmp51 Get the job done for less with a Brady Starter Kit. Save 10% versus purchasing each part separately! Everything you need to get started with your voice/data labeling. Kit includes: • Hard case, USB cable and AC power supply • Self-laminating cable markers (M-21-427) • Port, faceplate and general ID labels (M-30-422) • Non-adhesive slide-in strips for punch blocks (MC-475-412) • Rack and panel labels (MC-1000-595-YL-BK) • 1.5” White label roll for general ID (MC-1500-595-WT-BK) * BMP51 kit shown. Catalog # Description BMP51-KIT-VD BMP53-KIT-VD Kit with BMP51 Label Printer and Li-Ion Battery Kit with BMP53 Label Printer and LabelMark™ 5 Software Portable Printers Voice / Data Communications Starter Kit Electrical Starter Kit This kit includes a variety of wire and cable marking materials, as well as continuous tape for panel identification. Kit includes: • Hard case, USB cable and AC power supply • Self-laminating wire markers (M-103-427) • Wrap around wire markers (M-18-498) • PermaSleeve® PS heat shrink wire markers (M-187-1-342) • Panel identification labels (MC-1500-595-OR-BK) • 1.5” White label roll for general ID (MC-1500-595-WT-BK) * BMP53 kit shown. Catalog # Description BMP51-KIT-EL BMP53-KIT-EL Kit with BMP51 Label Printer and Li-Ion Battery Kit with BMP53 Label Printer and LabelMark™ 5 Software Facility Identification Starter Kit Kit includes a variety of our durable indoor/outdoor vinyl tapes. Kit includes: • Hard case, USB cable and AC power supply • 1.5” Yellow label roll with black ribbon (MC-1500-595-YL-BK) • 1.5” White label roll with red ribbon (MC-1500-595-WT-RD) • 1.5” Green label roll with white ribbon (MC-1500-595-GN-WT) • 1.5” White label roll with black ribbon (MC-1500-595-WT-BK) • 2” x 1” labels for low surface energy labeling (M-20-483) * BMP51 kit shown. Catalog # Description BMP51-KIT-GI BMP53-KIT-GI Kit with BMP51 Label Printer and Li-Ion Battery Kit with BMP53 Label Printer and LabelMark™ 5 Software Lab Identification Starter Kit Accurately identify and track samples in your lab with this lab ID starter kit. Kit includes: • Hard case, USB cable and AC power supply • Vial & tube labels (M-156-492) • Microplate labels (M-81-488) • Top & side label set for vials & tubes (M-120-492) • Removable diecut labels for bottles, beakers, etc. (M-103-498) • 1.5” White label roll for general ID (MC-1500-595-WT-BK) * BMP53 kit shown. 1-888-272-3946 10b_BMP51-53.indd 309 Catalog # Description BMP51-KIT-LS BMP53-KIT-LS Kit with BMP51 Label Printer and Li-Ion Battery Kit with BMP53 Label Printer and LabelMark™ 5 Software BradyID.com/s34 309 11/24/14 3:34 PM