C R E AT I V E
INTERCONNECT
SOLUTIONS
CMM
MIL55302
SPECIFICATIONS
MODULAR
CONNECTOR
SUB-D TYPE
_
HARSH
ENVIRONMENT
2mm
pitch
Couv_rabat_2011.qxd:Mise en page 1 18/05/11 11:37 Page1
SUBSIDIARIES
FRANCE
T:+33 (0)4 50 36 13 85
france@nicomatic.com
UNITED STATES
T:+1 21 54 44 95 80
usa@nicomatic.com
SOUTH KOREA
T: +82 (0)2 553 6822
korea@nicomatic.com
CHINA
T:+86 (0)22 23 85 88 36
china@nicomatic.com
JAPAN
T: +81 (0)80 2138 0909
japan@nicomatic.com
INDIA
T: +91 80 421 315 74
india@nicomatic.com
SINGAPORE
T: +65 62 62 12 80
singapore@nicomatic.com
UNITED KINGDOM
T: +44 (0) 11 83 80 10 33
uk@nicomatic.com
CANADA
T: +41 (0) 438 885 3395
canada@nicomatic.com
GERMANY
T: +49 (0)33 203 878 801
germany@nicomatic.com
TAIWAN
T: +886 (0)2 2311 2667
taiwan@nicomatic.com
MEMBER OF
Gifas - Eden
Aerospace cluster
TURKEY
T: +90 (0) 312 504 37 29
turkey@nicomatic.com
WEBSITE
nicomatic.com
CAREER
COME & JOIN US
◆ Improving technology
◆ Diversity & gender equality
◆ We promote initiative & responsibility
CMM Series Micro-connectors
CMM CATALOG
HEADQUARTER
NICOMATIC specializes in the design, development and manufacture of electronic connectors.
The CMM MICRO CONNECTOR interconnection system is a 2mm pitch connector (square matrix) with proven high reliability under
the most extreme environmental conditions:
- Flexible architecture: "Board to Board", "Board toWire" and "Wire toWire" configurations
- Modular and hybrid design: mixed layout full option with Low Frequency – LF (over 5 Amp) – and High Frequency – HF - (over 11
GHz) and High Power - HP - (over 30 Amp)
- High reliability contact design & High performance under harsh use conditions
- Secure: integral jacking mechanism or locking by spring latch
The CMM MICRO CONNECTOR is a complete and standard range of connectors:
- CMM 100 series: 1 row – from 2 to 25 LF contacts
- CMM 200 series: 2 rows – from 4 to 50 LF contacts
- CMM 220 series: 2 rows – from 4 to 60 LF contacts, or up to 15 HF or HP contacts (series 30)
- CMM 320 series: 3 rows – from 6 to 120 LF contacts, or up to 20 HF or HP contacts (series 30)
- CMM 340 series: 3 rows – min. 6 LF contacts and up to 64 HF or HP contacts (series 22)
Direct benefits:
- Space saving: - 40% in surface and over - 60% in volume
- Weight saving: - 20 to - 50% vs. usual solution for same functionalities
- Reduce number of connectors: 2 or 3 connectors in 1 thanks to a modular concept
- Cost effective solution: custom connector assembly from standard components
- Proven success stories in on-board electronic systems
- Full traceability with EN9100:2003
- Short lead time: 1 week express service, Premium service, Fast sampling and prototyping
- Online services (www.nicomatic.com): Free use of My Niomatic service (2D & 3D drawings), automatic part number & mating-half
configurators, technical support .
READY TO JOIN OUR TEAM?
recruitment@nicomatic.com
C R E AT I V E
I N T E R CO N N E CT
S O LU T I O N S
CMM
MIL55302
SPECIFICATIONS
MODULAR
CONNECTOR
_
HARSH
ENVIRONMENT
The CMM has been developed for the aerospace, avionics, instrumentation & control, defence and transportation markets, with applications
that include IFES, HUDs, flight controls, FADEC units, radars, missiles, electro-optical sighting systems, satellites, mobile radios, power supplies,
UAVs and engine controls. It is also used in a growing number of medical, and telecom applications.
2mm
pitch
2
Couv_rabat_2011.qxd:Mise en page 1 18/05/11 11:37 Page2
Dimension Tables
CMM 100/200 SERIES
CMM Specifications (with LF contacts)
Manufacturer and designer of
innovative interconnect solutions
MATERIALS
in male & female styles for LF contacts
INSULATOR: Special PPS (Polyphenylene Sulfide Fiberglass filled thermoplastic) UL 94-V0
CMM SERIES
100 & 200
Male
LF contacts number series 100 2
3
4
LF contacts number series 200 4
6
8
Length in mm
A
2
4
6
Length in mm (Strap)
B
6,7 8,7 10,7
Length in mm
C 7,4 9,4 11,4
Length C with Latches fitted
7,8 9,8 11,8
5
10
8
12,7
13,4
13,8
6
12
10
14,7
15,4
15,8
7
14
12
16,7
17,4
17,8
8
16
14
18,7
19,4
19,8
9
18
16
20,7
21,4
21,8
10
20
18
22,7
23,4
23,8
11
22
20
24,7
25,4
25,8
12
24
22
26,7
27,4
27,8
13
26
24
28,7
29,4
29,8
14
28
26
30,7
31,4
31,8
15
30
28
32,7
33,4
33,8
16
32
30
34,7
35,4
35,8
17
34
32
36,7
37,4
37,8
18
36
34
38,7
39,4
39,8
19
38
36
40,7
41,4
41,8
20
40
38
42,7
43,4
43,8
21
42
40
44,7
45,4
45,8
22
44
42
46,7
47,4
47,8
23
46
44
48,7
49,4
49,8
24
48
46
50,7
51,4
51,8
25
50
48
52,7
53,4
53,8
• Radiation resistance
• No humidity absorption
• Oxygen free
Note : PPS characteristics are recognized for space applications
CMM SERIES
100 & 200
Female
LF contacts number series 100
LF contacts number series 200
Length in mm
A
Length in mm
B
D
E
F
G
LF CONTACTS REFERENCE MARK
NUMBER FOR CMM SERIES 200
Male & Female
CMM 220 SERIES
LF contacts number
Distance between A
axis
B
CMM
SERIES 220 Length in mm
Male &
LF contacts
Female
reference mark
number
C
D
E
F
G
2
4
2
7
3
6
4
9
4
8
6
11
5
10
8
13
6
12
10
15
7
14
12
17
8
16
14
19
9
18
16
21
10
20
18
23
11
22
20
25
12
24
22
27
13
26
24
29
14
28
26
31
15
30
28
33
16
32
30
35
17
34
32
37
18
36
34
39
19
38
36
41
20
40
38
43
21
42
40
45
22
44
42
47
23
46
44
49
24
48
46
51
25
50
48
53
1
2
3
4
1
3
4
6
1
4
5
8
1
5
6
10
1
6
7
12
1
7
8
14
1
8
9
16
1
9
10
18
1
10
11
20
1
11
12
22
1
12
13
24
1
13
14
26
1
14
15
28
1
15
16
30
1
16
17
32
1
17
18
34
1
18
19
36
1
19
20
38
1
20
21
40
1
21
22
42
1
22
23
44
1
23
24
46
1
24
25
48
1
25
26
50
Special contacts number
CMM 220
Male & Female Distance between A
axis
Special
B
contacts only
Length in mm
C
LF contacts number 6
Distance between A 2
axis
B 11
Length in mm
C 17
CMM
D 1
SERIES 320
E 2
Male &
LF contacts
F 3
Female
reference mark
G 4
number
H 5
J 6
9
4
13
19
1
3
4
6
7
9
12
10
17
22
1
6
7
12
12
6
15
21
1
4
5
8
9
12
14
12
19
24
1
7
8
14
16
14
21
26
1
8
9
16
18
16
23
28
1
9
10
18
20
18
25
30
1
10
11
20
22
20
27
32
1
11
12
22
24
22
29
34
1
12
13
24
26
24
31
36
1
13
14
26
28
26
33
38
1
14
15
28
30
28
35
40
1
15
16
30
32
30
37
42
1
16
17
32
34
32
39
44
1
17
18
34
36
34
41
46
1
18
19
36
38
36
43
48
1
19
20
38
40
38
45
50
1
20
21
40
42
40
47
52
1
21
22
42
44
42
49
54
1
22
23
44
46
44
51
56
1
23
24
46
48
46
53
58
1
24
25
48
3
8
17
22
4
12
21
26
5
16
25
30
6
20
29
34
7
24
33
38
8
28
37
42
9
32
41
46
10
36
45
50
11
40
49
54
18
10
19
25
1
6
7
12
13
18
21
12
21
27
1
7
8
14
15
21
24
14
23
29
1
8
9
16
17
24
27
16
25
31
1
9
10
18
19
27
30
18
27
33
1
10
11
20
21
30
33
20
29
35
1
11
12
22
23
33
36
22
31
37
1
12
13
24
25
36
39
24
33
39
1
13
14
26
27
39
42
26
35
41
1
14
15
28
29
42
45
28
37
43
1
15
16
30
31
45
48
30
39
45
1
16
17
32
33
48
51
32
41
47
1
17
18
34
35
51
54
34
43
49
1
18
19
36
37
54
57
36
45
51
1
19
20
38
39
57
60
38
47
53
1
20
21
40
41
60
63
40
49
55
1
21
22
42
43
63
66
42
51
57
1
22
23
44
45
66
69
44
53
59
1
23
24
46
47
69
72
46
55
61
1
24
25
48
49
72
75
48
57
63
1
25
26
50
51
75
78
50
59
65
1
26
27
52
53
78
81
52
61
67
1
27
28
54
55
81
84
54
63
69
1
28
29
56
57
84
87
56
65
71
1
29
30
58
59
87
50
48
55
60
1
25
26
50
12
44
53
58
90
58
67
73
1
30
31
60
61
90
93
60
69
75
1
31
32
62
63
93
52
50
57
62
1
26
27
52
54
52
59
64
1
27
28
54
13
48
57
62
96
62
71
77
1
32
33
64
65
96
Female:
Body : copper alloy / Ni + Au 0,2 µ
Socket : beryllium copper / Ni + Au > 1,25µ
56
54
61
66
1
28
29
56
58
56
63
68
1
29
30
58
60
58
65
70
1
30
31
60
14
52
61
66
99
64
73
79
1
33
34
66
67
99
102
66
75
81
1
34
35
68
69
102
105
68
77
83
1
35
36
70
71
105
108
70
79
85
1
36
37
72
73
108
111
72
81
87
1
37
38
74
75
111
114
74
83
89
1
38
39
76
77
114
117
76
85
91
1
39
40
78
79
117
OMM SERIES MICRO-CIRCULAR CONNECTORS
High density of contacts in smallest circular connector shape
Space saving feature
Security of connection
Light weight
Lockable captive fixing hardware
ELECTRICAL
• All contacts
3 A max. @ 25°C
2.2 A max. @ 85°C
• Working voltage (sea level)
Tested at 800 V DC
• Proof voltage
Tested at 1 200 V DC
• Contact resistance (initially)
max. 10 mΩ
• Insulation resistance
1 000 MΩ min.
MECHANICAL
15
56
65
70
• Mechanical operations
Up to 2500 cycles
• Contact insertion and withdrawal force
2 N max. / 0.2 N min. per contact
• Contact retention in insulator
10 N min.
• Contact replacement in insulator
1-3 cycles (Crimp contacts only)
ENVIRONMENTAL
120
78
87
93
1
40
41
80
81
120
• Temperature cycling
From - 60°C to + 260°C
Reflow solder process compatible (+260°C)
• Vibration severity
0.75 mm, 10 g RMS 6 hours long random with superimposed sinusoid. No
intermittencies measured when using an H.S.L.I (High Speed Logic Interrupt)
detector with a trip threshold of 2 ns.
MIL-DTL-55302F Test Condition III [147.1 m/s2 (15 gn) peak]
• Shock severity
100 g for 6 ms
• Solvent resistance
CMM 340 SERIES
CMM 340
Male & Female
Special
contacts only
3
2mm pitch high density robust metal shielded micro connector
Self cabling connector
Simple and easy to design-in
New alternative under MIL-DTL-83513G or MIL-DTL-55302F test routine
Very flexible custom design (fixing hardware, contacts…)
Female:
Body : copper alloy / Ni + Au > 0,2 µ
Socket : beryllium copper / Ni + Au > 1,25µ
• Latch : Beryllium copper/plated nickel
(CMM 100/200 series only)
in male & female styles for LF contacts
15
8
17
23
1
5
6
10
11
15
MICRO-D MIX™ DMM SERIES MICRO-CONNECTORS
FIXING HARDWARE:
• Jackscrew: Stainless steel.
in male & female styles for HF/HP contacts
2
4
13
18
CMM 320 SERIES
CRIMP LF CONTACTS :
Male:
Body : copper alloy / Ni + Au > 1µ
in male & female styles for LF contacts
4 6 8 10
2 4 6 8
9 11 13 15
14 16 18 20
1 1 1 1
2 3 4 5
3 4 5 6
4 6 8 10
CMM 220 SERIES
P.C. LF CONTACTS :
Male:
Tail : copper alloy / Ni + Au flash 0,1µ
Contact area : copper alloy / Ni + Au > 1µ
MICROFLEX HARNESS SOLUTION
Low weight: save up to -30% vs. bulky cable
Smaller space-factor
2 in 1 technology with CMM & CRIMPFLEX
Avionic & aerospace MIL comply
High quality of crimp (gaz tie)
High productivity: 2 to 30 contacts in 1 crimp
4D-FLOATING CONNECTORS
4D tolerance absorption: 4D = 3 axial movements + 1 rotation
High efficiency “Bone design” (round shape and 4 spring-lips contact)
Complies with MIL-DTL-55302F
Auto alignment feature
Adaptable to customer requests
CUSTOM PRODUCTS
You can rely on our R&D department know-how and long experience.
Our permanent innovation was recognized and labelized as "highly Innovative" by the European Union
Our in-house production and assembly capacity offers you the possibility to create customized products :
stamping and moulding, micro-screw machining, laser cut, CNC, specific machinery development, clean
room, measure and test lab.
Fully integrated industrial company, Nicomatic can reduce your risks, can secure your development and
achieve the solution that will make the difference on the market.
in male & female styles for HF/HP contacts
Special contacts number 4 6 8
Distance between A 2,5 5 7,5
axis
B 12,5 15 17,5
Length in mm
C 18,5 21 23,5
10
10
20
26
12
12,5
22,5
28,5
14
15
25
31
16
17,5
27,5
33,5
18
20
30
36
20
22,5
32,5
38,5
22
25
35
41
24
27,5
37,5
43,5
26
30
40
46
28
32,5
42,5
48,5
30
35
45
51
32
37,5
47,5
53,5
34
40
50
56
36
42,5
52,5
58,5
38
45
55
61
40
47,5
57,5
63,5
42
50
60
66
44
52,5
62,5
68,5
46
55
65
71
48
57,5
67,5
73,5
50
60
70
76
52
62,5
72,5
78,5
54
65
75
81
56
67,5
77,5
83,5
58
70
80
86
60
72,5
82,5
88,5
62
75
85
91
Note :
The CMM micro-connectors are designed to meet or exceed
the relevant electrical and environmental performances
described in MIL-DTL-55302F & BS-9525-F0033 standards.
64
77,5
87,5
93,5
4
Date of issue : May 2011
Catalogue reference : C.CMM.1000/GB
NICOMATIC maintains a policy of ongoing development and
improvement. It therefore reserves the right to change design,
dimensions and specifications without notice. All information stated
inside this catalogue is not contractual and subject to change
(eg. standard connector configurations).
Copyright 2011 by NICOMATIC (All Rights Reserved).
125
Couv_rabat_2011.qxd:Mise en page 1 18/05/11 11:37 Page2
Dimension Tables
CMM 100/200 SERIES
CMM Specifications (with LF contacts)
Manufacturer and designer of
innovative interconnect solutions
MATERIALS
in male & female styles for LF contacts
INSULATOR: Special PPS (Polyphenylene Sulfide Fiberglass filled thermoplastic) UL 94-V0
CMM SERIES
100 & 200
Male
LF contacts number series 100 2
3
4
LF contacts number series 200 4
6
8
Length in mm
A
2
4
6
Length in mm (Strap)
B
6,7 8,7 10,7
Length in mm
C 7,4 9,4 11,4
Length C with Latches fitted
7,8 9,8 11,8
5
10
8
12,7
13,4
13,8
6
12
10
14,7
15,4
15,8
7
14
12
16,7
17,4
17,8
8
16
14
18,7
19,4
19,8
9
18
16
20,7
21,4
21,8
10
20
18
22,7
23,4
23,8
11
22
20
24,7
25,4
25,8
12
24
22
26,7
27,4
27,8
13
26
24
28,7
29,4
29,8
14
28
26
30,7
31,4
31,8
15
30
28
32,7
33,4
33,8
16
32
30
34,7
35,4
35,8
17
34
32
36,7
37,4
37,8
18
36
34
38,7
39,4
39,8
19
38
36
40,7
41,4
41,8
20
40
38
42,7
43,4
43,8
21
42
40
44,7
45,4
45,8
22
44
42
46,7
47,4
47,8
23
46
44
48,7
49,4
49,8
24
48
46
50,7
51,4
51,8
25
50
48
52,7
53,4
53,8
• Radiation resistance
• No humidity absorption
• Oxygen free
Note : PPS characteristics are recognized for space applications
CMM SERIES
100 & 200
Female
LF contacts number series 100
LF contacts number series 200
Length in mm
A
Length in mm
B
D
E
F
G
LF CONTACTS REFERENCE MARK
NUMBER FOR CMM SERIES 200
Male & Female
CMM 220 SERIES
LF contacts number
Distance between A
axis
B
CMM
SERIES 220 Length in mm
Male &
LF contacts
Female
reference mark
number
C
D
E
F
G
2
4
2
7
3
6
4
9
4
8
6
11
5
10
8
13
6
12
10
15
7
14
12
17
8
16
14
19
9
18
16
21
10
20
18
23
11
22
20
25
12
24
22
27
13
26
24
29
14
28
26
31
15
30
28
33
16
32
30
35
17
34
32
37
18
36
34
39
19
38
36
41
20
40
38
43
21
42
40
45
22
44
42
47
23
46
44
49
24
48
46
51
25
50
48
53
1
2
3
4
1
3
4
6
1
4
5
8
1
5
6
10
1
6
7
12
1
7
8
14
1
8
9
16
1
9
10
18
1
10
11
20
1
11
12
22
1
12
13
24
1
13
14
26
1
14
15
28
1
15
16
30
1
16
17
32
1
17
18
34
1
18
19
36
1
19
20
38
1
20
21
40
1
21
22
42
1
22
23
44
1
23
24
46
1
24
25
48
1
25
26
50
Special contacts number
CMM 220
Male & Female Distance between A
axis
Special
B
contacts only
Length in mm
C
LF contacts number 6
Distance between A 2
axis
B 11
Length in mm
C 17
CMM
D 1
SERIES 320
E 2
Male &
LF contacts
F 3
Female
reference mark
G 4
number
H 5
J 6
9
4
13
19
1
3
4
6
7
9
12
10
17
22
1
6
7
12
12
6
15
21
1
4
5
8
9
12
14
12
19
24
1
7
8
14
16
14
21
26
1
8
9
16
18
16
23
28
1
9
10
18
20
18
25
30
1
10
11
20
22
20
27
32
1
11
12
22
24
22
29
34
1
12
13
24
26
24
31
36
1
13
14
26
28
26
33
38
1
14
15
28
30
28
35
40
1
15
16
30
32
30
37
42
1
16
17
32
34
32
39
44
1
17
18
34
36
34
41
46
1
18
19
36
38
36
43
48
1
19
20
38
40
38
45
50
1
20
21
40
42
40
47
52
1
21
22
42
44
42
49
54
1
22
23
44
46
44
51
56
1
23
24
46
48
46
53
58
1
24
25
48
3
8
17
22
4
12
21
26
5
16
25
30
6
20
29
34
7
24
33
38
8
28
37
42
9
32
41
46
10
36
45
50
11
40
49
54
18
10
19
25
1
6
7
12
13
18
21
12
21
27
1
7
8
14
15
21
24
14
23
29
1
8
9
16
17
24
27
16
25
31
1
9
10
18
19
27
30
18
27
33
1
10
11
20
21
30
33
20
29
35
1
11
12
22
23
33
36
22
31
37
1
12
13
24
25
36
39
24
33
39
1
13
14
26
27
39
42
26
35
41
1
14
15
28
29
42
45
28
37
43
1
15
16
30
31
45
48
30
39
45
1
16
17
32
33
48
51
32
41
47
1
17
18
34
35
51
54
34
43
49
1
18
19
36
37
54
57
36
45
51
1
19
20
38
39
57
60
38
47
53
1
20
21
40
41
60
63
40
49
55
1
21
22
42
43
63
66
42
51
57
1
22
23
44
45
66
69
44
53
59
1
23
24
46
47
69
72
46
55
61
1
24
25
48
49
72
75
48
57
63
1
25
26
50
51
75
78
50
59
65
1
26
27
52
53
78
81
52
61
67
1
27
28
54
55
81
84
54
63
69
1
28
29
56
57
84
87
56
65
71
1
29
30
58
59
87
50
48
55
60
1
25
26
50
12
44
53
58
90
58
67
73
1
30
31
60
61
90
93
60
69
75
1
31
32
62
63
93
52
50
57
62
1
26
27
52
54
52
59
64
1
27
28
54
13
48
57
62
96
62
71
77
1
32
33
64
65
96
Female:
Body : copper alloy / Ni + Au 0,2 µ
Socket : beryllium copper / Ni + Au > 1,25µ
56
54
61
66
1
28
29
56
58
56
63
68
1
29
30
58
60
58
65
70
1
30
31
60
14
52
61
66
99
64
73
79
1
33
34
66
67
99
102
66
75
81
1
34
35
68
69
102
105
68
77
83
1
35
36
70
71
105
108
70
79
85
1
36
37
72
73
108
111
72
81
87
1
37
38
74
75
111
114
74
83
89
1
38
39
76
77
114
117
76
85
91
1
39
40
78
79
117
OMM SERIES MICRO-CIRCULAR CONNECTORS
High density of contacts in smallest circular connector shape
Space saving feature
Security of connection
Light weight
Lockable captive fixing hardware
ELECTRICAL
• All contacts
3 A max. @ 25°C
2.2 A max. @ 85°C
• Working voltage (sea level)
Tested at 800 V DC
• Proof voltage
Tested at 1 200 V DC
• Contact resistance (initially)
max. 10 mΩ
• Insulation resistance
1 000 MΩ min.
MECHANICAL
15
56
65
70
• Mechanical operations
Up to 2500 cycles
• Contact insertion and withdrawal force
2 N max. / 0.2 N min. per contact
• Contact retention in insulator
10 N min.
• Contact replacement in insulator
1-3 cycles (Crimp contacts only)
ENVIRONMENTAL
120
78
87
93
1
40
41
80
81
120
• Temperature cycling
From - 60°C to + 260°C
Reflow solder process compatible (+260°C)
• Vibration severity
0.75 mm, 10 g RMS 6 hours long random with superimposed sinusoid. No
intermittencies measured when using an H.S.L.I (High Speed Logic Interrupt)
detector with a trip threshold of 2 ns.
MIL-DTL-55302F Test Condition III [147.1 m/s2 (15 gn) peak]
• Shock severity
100 g for 6 ms
• Solvent resistance
CMM 340 SERIES
CMM 340
Male & Female
Special
contacts only
3
2mm pitch high density robust metal shielded micro connector
Self cabling connector
Simple and easy to design-in
New alternative under MIL-DTL-83513G or MIL-DTL-55302F test routine
Very flexible custom design (fixing hardware, contacts…)
Female:
Body : copper alloy / Ni + Au > 0,2 µ
Socket : beryllium copper / Ni + Au > 1,25µ
• Latch : Beryllium copper/plated nickel
(CMM 100/200 series only)
in male & female styles for LF contacts
15
8
17
23
1
5
6
10
11
15
MICRO-D MIX™ DMM SERIES MICRO-CONNECTORS
FIXING HARDWARE:
• Jackscrew: Stainless steel.
in male & female styles for HF/HP contacts
2
4
13
18
CMM 320 SERIES
CRIMP LF CONTACTS :
Male:
Body : copper alloy / Ni + Au > 1µ
in male & female styles for LF contacts
4 6 8 10
2 4 6 8
9 11 13 15
14 16 18 20
1 1 1 1
2 3 4 5
3 4 5 6
4 6 8 10
CMM 220 SERIES
P.C. LF CONTACTS :
Male:
Tail : copper alloy / Ni + Au flash 0,1µ
Contact area : copper alloy / Ni + Au > 1µ
MICROFLEX HARNESS SOLUTION
Low weight: save up to -30% vs. bulky cable
Smaller space-factor
2 in 1 technology with CMM & CRIMPFLEX
Avionic & aerospace MIL comply
High quality of crimp (gaz tie)
High productivity: 2 to 30 contacts in 1 crimp
4D-FLOATING CONNECTORS
4D tolerance absorption: 4D = 3 axial movements + 1 rotation
High efficiency “Bone design” (round shape and 4 spring-lips contact)
Complies with MIL-DTL-55302F
Auto alignment feature
Adaptable to customer requests
CUSTOM PRODUCTS
You can rely on our R&D department know-how and long experience.
Our permanent innovation was recognized and labelized as "highly Innovative" by the European Union
Our in-house production and assembly capacity offers you the possibility to create customized products :
stamping and moulding, micro-screw machining, laser cut, CNC, specific machinery development, clean
room, measure and test lab.
Fully integrated industrial company, Nicomatic can reduce your risks, can secure your development and
achieve the solution that will make the difference on the market.
in male & female styles for HF/HP contacts
Special contacts number 4 6 8
Distance between A 2,5 5 7,5
axis
B 12,5 15 17,5
Length in mm
C 18,5 21 23,5
10
10
20
26
12
12,5
22,5
28,5
14
15
25
31
16
17,5
27,5
33,5
18
20
30
36
20
22,5
32,5
38,5
22
25
35
41
24
27,5
37,5
43,5
26
30
40
46
28
32,5
42,5
48,5
30
35
45
51
32
37,5
47,5
53,5
34
40
50
56
36
42,5
52,5
58,5
38
45
55
61
40
47,5
57,5
63,5
42
50
60
66
44
52,5
62,5
68,5
46
55
65
71
48
57,5
67,5
73,5
50
60
70
76
52
62,5
72,5
78,5
54
65
75
81
56
67,5
77,5
83,5
58
70
80
86
60
72,5
82,5
88,5
62
75
85
91
Note :
The CMM micro-connectors are designed to meet or exceed
the relevant electrical and environmental performances
described in MIL-DTL-55302F & BS-9525-F0033 standards.
64
77,5
87,5
93,5
4
Date of issue : May 2011
Catalogue reference : C.CMM.1000/GB
NICOMATIC maintains a policy of ongoing development and
improvement. It therefore reserves the right to change design,
dimensions and specifications without notice. All information stated
inside this catalogue is not contractual and subject to change
(eg. standard connector configurations).
Copyright 2011 by NICOMATIC (All Rights Reserved).
125
Catalogue_2011_jauneetnoir.qxd:Miseenpage117/05/1116:34Page5
HF / HP contacts specifications
MATERIALS
• Spring loaded parts
Be/Cu gold plated
• Other metal parts
Copper alloy
• Insulator
PTFE (HF)
• Retaining clip
Be/Cu Ni plated
MECHANICAL
• Mechanical operations
Up to 500 cycles
• Insertion force
From 0.60 to 5 N per contact
• Withdrawal force
From 0.50 to 2 N per contact
• Secure overlapping
1.30 mm
• Contact replacement in insulator
50 cycles for HF / HP 30 series (5 cycles for HF / HP 22 series)
ELECTRICAL
High Power (HP) Contact
Intensity per contact
Intensity per connector
Dielectric Voltage (seal level)
Withstanding voltage Rated
voltage
High Altitude 70000ft :
Withstanding voltage
Rated voltage
Contact resistance max. 3 mΩ
Series 30
Series 22
35A
20A
High Frequency (HF) Contact
Impedance 5 0 Ω / 75Ω
Insulation resistance 106 M Ω
20A
10A
Insulation between 2 contacts -75 dB (depending on cable)
1500VRMS
500 VRMS
900VRMS
300 VRMS
360 VRMS
120 VRMS
300 VRMS
100 VRMS
Withstanding voltage (sea level) 1000 VRMS
Rated voltage 80 v AC / 500 mA
Contacts HF on cable
Frequency range up to
Series 30
20 GHz
Serie 22
6 GHz
ENVIRONMENTAL
• Temperature cycling
From -60°C to +260°C
• Salt spray test
96 hrs *
• Humidity test
56 days @ 90% humidity
HF / HP CONTACTS PART NUMBERING
“30” = series 30 [ø 3mm] (CMM 220 / 320)
“22” = series 22 [ø 2.2mm] (CMM 340)
These two digits are linked to the connector
Do not use them inside a CMM part number
(when loaded)
Contact type :
3 = Straight
4 = Right Angle
5 = SMT Right Angle
6 = SMT straight
-
Termination length (only for PCB contacts)
“CMM” = standard 3 mm
“45” = 4,5 mm
“…”
-
Special contacts :
1 = male HF
2 = female HF
3 = male HP
4 = female HP
Contact termination :
“00” = PCB,
“xx” = cable diameter x 10
“…”
Important notice:
According to the routines test other than MIL our technical features for CMM Micro-connectors reach a higher result. For
more information, please feel in the contact form on the website.
For example:
- Mechanical operations: up to 5 000 cycles
- High temperature test: 1 000H at 250°C
- Application with LVDS signal @ 400 MHz, impedance 100
Ohm
- High speed: USB, 1Gb/s Ethernet…
* without fixings
5
LF : low frequency contacts
Female
Male
PRESENTATION
Straight PCB
Type Y
90° PCB
Type V
Straight SMT
Type T
90° SMT
Type R
Crimp
Type S - C
Straight PCB
Type PF Press fit
INFORMATION TABLE
CMM RANGE
Male
100/200
Female
Male
220
Female
Male
320
Female
Male
340
Female
Y
YL
L=3,0
L=4,5
Y
YL
L=3,0
L=4,5
STRAIGHT ON PCB
YM
YX
L=5,1
90°
V
L=9,1
ON
L=3,0
YC
PF
L=1,2 Press fit
USE
PCB
VL
L=4,5
STRAIGHT SMT
T
TL
L=2,25
L=3,35
90° SMT
R
C
CRIMP
S
L=0,9
Gauge 22
Gauge 24-28
V
VL
T
TL
R
C
S
L=3,0
L=4,5
L=2,25
L=3,35
L=0,9
Gauge 22
Gauge 24-28
Y
YL
YM
YX
V
VL
T
TL
R
C
S
L=3,0
L=4,5
L=5,1
L=9,1
L=3,0
L=4,5
L=2,25
L=3,35
L=0,9
Gauge 22
Gauge 24-28
Y
YL
L=3,0
L=4,5
YC
PF
L=1,2 Press fit
V
VL
T
TL
R
C
S
L=3,0
L=4,5
L=2,25
L=3,35
L=0,9
Gauge 22
Gauge 24-28
Y
YL
YM
YX
V
VL
R
C
S
L=3,0
L=4,5
L=5,1
L=9,1
L=3,0
L=4,5
L=0,9
Gauge 22
Gauge 24-28
Y
YL
PF
V
VL
C
S
L=3,0
L=4,5
Press fit
L=3,0
L=4,5
Gauge 22
Gauge 24-28
Y
YL
YM
YX
V
VL
C
S
L=3,0
L=4,5
L=5,1
L=9,1
L=3,0
L=4,5
Gauge 22
Gauge 24-28
Y
YL
PF
V
VL
C
S
L=3,0
L=4,5
Press fit
L=3,0
L=4,5
Gauge 22
Gauge 24-28
L=6,50 / 8,00 / 10,50 / 12,00 / 14,50 /
16,00 mm upon request (only for
straight on pcb male contacts)
Standard contact
Any other type of contact upon request only
7
HF : high frequency contacts
(series 30)
Female
Male
PRESENTATION
Straight PCB
90° PCB
Straight SMT
90° SMT
Card edge
Straight Crimp
90° Crimp
Type D
Straight solder
90° solder
Type E
INFORMATION TABLE
CMM RANGE
TYPE
OF CONTACTS TO BE USED IN THE
TYPICAL USE
CMM CONNECTOR WITH
HF/HP CONTACTS ONLY
TYPE E FOR SPECIAL CONTACTS ON
Straight Crimp
90° Crimp
Straight solder
CAVITIES FOR
TYPE D FOR SPECIAL CONTACTS ON PCB (Eg.221D00F22-00 nbr of special contact-1300CMM)
Straight on PCB
90° on PCB
Straight SMT
90° SMT Card edge
CABLE
90° solder
Male
100/200
Female
Male
30-1300-CMM
30-1300-45
30-1400-CMM
30-1400-45
L=3,0
L=4,5
L=3,0
L=4,5
30-1600
30-1500-CMM
no LF contact
30-1500-12
220
Female
Male
30-2300-CMM
30-2300-45
30-2400-CMM
30-2400-45
L=3,0
L=4,5
L=3,0
L=4,5
30-1300-CMM
30-1300-45
30-1400-CMM
30-1400-45
L=3,0
L=4,5
L=3,0
L=4,5
30-2300-12
30-2300-14
30-2400-CMM
30-2400-45
L=3,0
L=4,5
L=3,0
L=4,5
320
Female
30-2600
30-1500-12
30-13XX-SS
30-13XX-DS
30-14XX-ZS
30-14XX-DS
xx=cable type
xx=cable type
30-23XX-SS
30-23XX-DS
30-24XX-ZS
30-24XX-DS
xx=cable type
xx=cable type
30-13XX-SS
30-13XX-DS
30-14XX-ZS
30-14XX-DS
xx=cable type
xx=cable type
30-23XX-SS
30-23XX-DS
30-24XX-ZS
30-24XX-DS
xx=cable type
xx=cable type
30-13XX-ZZ
30-14XX-ZZ
xx=cable type
xx=cable type
30-23XX-ZZ
30-24XX-ZZ
xx=cable type
xx=cable type
30-13XX-ZZ
30-14XX-ZZ
xx=cable type
xx=cable type
30-23XX-ZZ
30-24XX-ZZ
xx=cable type
xx=cable type
Male
340
Female
Standard contact
Any other type of contact upon request only
XX = 12, 20, 24, 26
Eg. 24 = cable Ø 2,4
XX = 20 or 26 for DS cable
XX = 47, 85
Eg. 47 for UT47 cable
Central contact
“S” = crimp
“Z” = solder
-
{
30 -
Shield
“S” = crimp
“Z” = solder
Double shield
“DS”
8
HP : high power contacts
(series 30)
Female
Male
PRESENTATION
Straight PCB
90° PCB
Straight SMT
90° SMT
90° SMT
Card edge
Straight Crimp
90° Crimp
Type D
Straight solder
90° solder
Type E
INFORMATION TABLE
CMM RANGE
TYPE
TYPICAL USE
CMM CONNECTOR WITH CAVITIES FOR HF/HP CONTACTS ONLY
TYPE D FOR SPECIAL CONTACTS ON PCB
TYPE E FOR SPECIAL CONTACTS ON CABLE
90° on PCB
Straight SMT
90° SMT
90° SMT Card edge
Straight Crimp
90° Crimp
Straight solder
90° solder
OF CONTACTS TO BE USED IN THE
Straight on PCB
Male
100/200
Female
Male
30-3300-CMM
30-3300-45
30-3400-CMM
30-3400-45
L=3,0
L=4,5
L=3,0
L=4,5
30-4300-CMM
30-4300-45
30-4400-CMM
30-4400-45
L=3,0
L=4,5
L=3,0
L=4,5
30-3300-CMM
30-3300-45
30-3400-CMM
30-3400-45
L=3,0
L=4,5
L=3,0
L=4,5
30-4300-12
30-4300-14
30-4400-CMM
30-4400-45
L=3,0
L=4,5
L=3,0
L=4,5
30-3600
30-3500
30-4600
30-4500
30-3500-CMM
no LF contact 30-3500-12
30-33XX
30-33XX
30-43XX
30-43XX
30-33XX
30-33XX
30-43XX
30-43XX
220
Female
Male
30-3500-12
320
Female
Male
340
Female
Standard contact
Any other type of contact upon request only
XX = 05, 08…
Eg. 08 for 8A
Please refer
to page 94
9
HF : high frequency contacts
(series 22)
Female
Male
PRESENTATION
Straight PCB
90° PCB
Straight SMT 90° SMT
Straight Crimp
Type D
90° Crimp
Straight solder
90° solder
Type E
INFORMATION TABLE
CMM RANGE
TYPE
TYPICAL USE
CMM CONNECTOR WITH
TYPE D FOR SPECIAL CONTACTS ON PCB
90° on PCB
Straight SMT
90° SMT
OF CONTACTS TO BE USED IN THE
Straight on PCB
HF/HP CONTACTS ONLY
TYPE E FOR SPECIAL CONTACTS ON CABLE
Straight Crimp
90° Crimp
Straight solder
90° solder
CAVITIES FOR
Male
100/200
Female
Male
220
Female
Male
320
Female
Male
22-1300-12
22-1300-14
L=3,0
L=4,5
22-2300-12
22-2300-14
L=3,0
L=4,5
340
Female
22-1400-12* 22-1400-14*
22-1400-22** 22-1400-24**
L=3,0
22-2400-12* 22-2400-14*
22-2400-22** 22-2400-24**
L=3,0
22-1312-ZS
22-1320-ZZ
22-2312-ZS
22-2320-ZZ
12 = cable Ø
1,2
20 = cable
Ø 2,0
L=4,5
L=4,5
Standard contact
Any other type of contact upon request only
* First row : 22-1400-12 / 22-1400-14 / 22-2400-12 / 22-2400-14
** Second row : 22-1400-22 / 22-1400-24 / 22-2400-22 / 22-2400-24
10
When a two-row connector mixes a 22-2400-12 and a
22-2400-22 contact, the P/N of the HF contact changes
to 2400-02.
When a two-row connector mixes a 22-1400-12 and a
22-1400-22 contact, the P/N of the HF contact changes
to 1400-02.
When a two-row connector mixes a 22-2400-14 and a
22-2400-24 contact, the P/N of the HF contact changes
to 2400-04.
When a two-row connector mixes a 22-1400-14 and a
22-1400-24 contact, the P/N of the HF contact changes
to 1400-04.
HP : high power contacts
(series 22)
Female
Male
PRESENTATION
Straight PCB
90° PCB
Straight SMT 90° SMT
Straight Crimp
90° Crimp
Type D
Straight solder
90° solder
Type E
INFORMATION TABLE
CMM RANGE
TYPE
TYPICAL USE
CMM CONNECTOR WITH
TYPE D FOR SPECIAL CONTACTS ON PCB
90° on PCB
Straight SMT
90° SMT
OF CONTACTS TO BE USED IN THE
Straight on PCB
HF/HP CONTACTS ONLY
TYPE E FOR SPECIAL CONTACTS ON
Straight Crimp
90° Crimp
Straight solder
CAVITIES FOR
CABLE
90° solder
Male
100/200
Female
Male
220
Female
Male
320
Female
Male
22-3300-12
22-3300-14
L=3,0
L=4,5
22-4300-12
22-4300-14
L=3,0
L=4,5
340
Female
22-3400-12* 22-3400-14*
22-3400-22** 22-3400-24**
L=3,0
22-4400-12* 22-4400-14*
22-4400-22** 22-4400-24**
L=3,0
22-33XX
22-33XX
22-43XX
22-43XX
L=4,5
L=4,5
Standard contact
Any other type of contact upon request only
* First row : 22-3400-12 / 22-3400-14 / 22-4400-12 / 22-4400-14
** Second row : 22-3400-22 / 22-3400-24 / 22-4400-22 / 22-4400-24
XX = 05, 08, 10
10 = 10A
Please refer
to page 102
When a two-row connector mixes a 22-3400-12 and a
22-3400-22 contact, the P/N of the HF contact changes
to 3400-02.
When a two-row connector mixes a 22-4400-12 and a
22-4400-22 contact, the P/N of the HF contact changes
to 4400-02.
When a two-row connector mixes a 22-3400-14 and a
22-3400-24 contact, the P/N of the HF contact changes
to 3400-04.
When a two-row connector mixes a 22-4400-14 and a
22-4400-24 contact, the P/N of the HF contact changes
to 4400-04.
11
Male housing marking
CMM 100/200
Marking : NCM (Nicomatic) + date code (Lot number)
CMM 220
Marking 1 : NCM (Nicomatic) + date code (Lot number)
Marking on two faces if the number
Connector P/N
of LF contacts is < to 10.
LF contact number 1
Marking 2 : NCM (Nicomatic) + date code (Lot number) : CMM 220 mixed layout (LF + HF/HP)
(as for CMM 100/200)
CMM 220 with HF/HP contacts
CMM 220 with 04 LF contacts
Marking LF contacts type : Y-YL-V-VL-R-T-S-C
(LF contacts only)
CMM 320/340
Marking 1 : NCM (Nicomatic)
/ date code (Lot number)
Connector P/N
LF contact number 1
(LF contacts only)
Marking 2 : NCM (Nicomatic) / date code (Lot number) : CMM 320 mixed layout
CMM 320 with HF/HP contacts
CMM 340
Marking LF contacts type : Y-YL-V-VL-S-C
(as for CMM 100/200)
12
Female housing marking
CMM 100/200
Marking : NCM (Nicomatic) + date code (Lot number)
CMM 220
Marking 1 : NCM (Nicomatic) + date code (Lot number)
Marking on two faces if the number
Connector P/N
of LF contacts is < to 10.
LF contact number 1
Marking 2 : NCM (Nicomatic) + date code (Lot number) : CMM 220 mixed layout (LF + HF/HP)
(as for CMM 100/200)
CMM 220 with HF/HP contacts
CMM 220 with 04 LF contacts
Marking LF contacts type : Y-YL-V-VL-R-T-S-C-PF
(LF contacts only)
CMM 320/340
Marking 1 : NCM (Nicomatic) / date code (Lot number)
Connector P/N
LF contact number 1
Marking 2 : NCM (Nicomatic) / date code (Lot number) : CMM 320 mixed layout HF/HP contacts
(as for CMM 100/200)
CMM 320 with HF/HP contacts
CMM 340
Marking LF contacts type : Y-YL-V-VL-S-C-PF
(LF contacts only)
13
Nicomatic CMM part
Code with Low Frequency
contacts only
Series
Gender
Termination
Style
Number
of LF
contacts
3 rows
3 rows
2 rows
2 rows 1 row
n
10
20
n
Fixing
Hardware
n
Additional code for mixed-layout
connector (HF/HP)
Number of HF/HP
contacts pin 1 side
(LF contact number 1)
y
y
With Latch
1 male Refer to table 02 to 25
page 22
(nn)
on page 7
2 female
Without Latch
With Latch
1 male Refer to table 04 to 50
page 22
(nn)
on page 7
2 female
Without Latch
z
HF/HP
Contact Type
z
No HF / HP contacts
Depends upon the number of LF contacts
Refer to table 04 to 60 Refer to pages If use with shifted central key, please refer to page 38
(nn)
43 to 46
on page 7
HF / HP : 15 contacts max.
2 female
Type of HF/HP contact : please refer to pages 8-9
1 male
22
Refer to table 006 to 120 Refer to pages
(nnn)
69 to 74
on page 7
32
34
Coaxmatic™ 30
Depends upon the number of LF contacts
1 male
2 female
HF / HP : 20 contacts max.
Type of HF/HP contact : please refer to pages 8-9
1 male
Depends upon the number of LF contacts
Refer to
Refer to table the series Refer to pages
320
69 to 74
on page 7
(nnn)
2 female
HF / HP : 64 contacts max.
Type of HF/HP contact : please refer to pages 10-11
Note :
For any configuration outside of this part
numbering system, please contact us.
14
Number of HF/HP
contacts opposite to
LF contact number 1
Coaxmatic™ 30
Coaxmatic™ 22
numbering system
CMM 100/200 Series
p. 17 to 25
CMM 220 Series
p. 27 to 46
CMM 320 Series
p. 47 to 59
CMM 340 Series
p. 60 to 74
High Frequency and High Power contacts
p. 75 to 102
(HF)
(HP)
Tools and accessories
p. 103 to 112
Cable instructions & assembly
p. 113 to 122
15
16
CMM 100 / 200
PART NUMBERING REMINDER
Code with Low Frequency
contacts only
Series
Gender
Termination
Style
Number
of LF
contacts
2 rows 1 row
n
10
20
Fixing
Hardware
n
With Latch “L”,
1 male Refer to table
02 to 25 “FL”, “LS” page 22
on page 7
2 female
Without Latch “ ”
With Latch “L”,
1 male Refer to table
04 to 50 “FL”, “LS” page 22
on page 7
2 female
Without Latch “ ”
17
Configuration
CMM 100
CONNECTOR SPACING
without latch only
without latch only
CONTACTS POSITIONS
18
Configuration
CMM 200
CONNECTOR SPACING
without latch only
without latch only
CONTACTS POSITIONS
19
CMM 100 / 200 male
STRAIGHT PCB
Part numbering :
“1” = Series 100
“2” = Series 200
Type : Y-YL
nn
01
“L”, “FL” = with latch page 22
“ ” = without latch
nn = number of LF contacts
Type
L
Y
3
YL
4,5
Calculation :
CMM 100
CMM 200
A = (nn x 2) - 2
A = nn - 2
B = A + 4,7
B = A + 4,7
C = A + 5,4
C = A + 5,4
Refer to dimension table on cover page
nn min = 02
nn max = 25
nn min = 04
nn max = 50
nn min = 02
nn max = 25
nn min = 04
nn max = 50
90° PCB
Part numbering :
“1” = Series 100
“2” = Series 200
Type :V-VL
nn
01
“L”, “FL” = with latch page 22
“ ” = without latch
nn = number of LF contacts
Type
L
V
3
VL
4,5
Calculation :
CMM 100
CMM 200
A = (nn x 2) - 2
A = nn - 2
B = A + 4,7
B = A + 4,7
C = A + 5,4
C = A + 5,4
Refer to dimension table on cover page
20
CMM 100 / 200 male
STRAIGHT SMT
Part numbering :
“1” = Series 100
“2” = Series 200
Type :T-TL
01
nn
“LS”, “L”, “FL” = with latch page 22
“ ” = without latch
nn = number of LF contacts
Calculation :
CMM 100
CMM 200
A = (nn x 2) - 2
A = nn - 2
C = A + 5,4
C = A + 5,4
Refer to dimension table on cover page
nn min = 02
nn max = 25
nn min = 04
nn max = 50
nn min = 02
nn max = 25
nn min = 04
nn max = 50
90° SMT
Part numbering :
“1” = Series 100
“2” = Series 200
01Rnn
“LS”, “L”, “FL” = with latch page 22
“ ” = without latch
nn = number of LF contacts
Calculation :
CMM 100
CMM 200
A = (nn x 2) - 2
A = nn - 2
C = A + 5,4
C = A + 5,4
Refer to dimension table on cover page
21
CMM 100 / 200 male
CRIMP
Part numbering :
“1” = Series 100
“2” = Series 200
Type : S-C
nn
01
“L”, “FL” = with latch page 22
“ ” = without latch
Type
Gauge
S
24-28
C
22
nn = number of LF contacts
Calculation :
CMM 100
CMM 200
A = (nn x 2) - 2
A = nn - 2
C = A + 5,4
C = A + 5,4
Refer to dimension table on cover page
nn min = 02
nn max = 25
nn min = 04
nn max = 50
RETENTION LATCHES FOR CMM 100 / 200 MALE
Straight latch with locking “L”
Straight latch without locking “FL”
Latch for CMM connector with T termination style “LS”
Latch for CMM connector with R termination style “LS”
The strain relief straps are supplied with all male CMM 100 / 200 connectors
mounted with latches L or FL type except for Y & YL terminations
22
PCB Thickness
P/N
< 2,5 mm
13218
V
Termination style
Y
T/TL
R
> 2,5 mm
13816
VL
YL
T/TL
R
If no strain relief straps with
your connector, please order
under P/Ns on the left
CMM 100 / 200 female
STRAIGHT PCB
Part numbering :
“1” = Series 100
“2” = Series 200
nn
02
Type : Y-YL
Type
L
Y
3
YL
4,5
nn = number of LF contacts
Calculation :
CMM 100
CMM 200
A = (nn x 2) - 2
A = nn - 2
B =A + 5
B =A + 5
Refer to dimension table on cover page
nn min = 02
nn max = 25
nn min = 04
nn max = 50
nn min = 02
nn max = 25
nn min = 04
nn max = 50
90° PCB
Part numbering :
“1” = Series 100
“2” = Series 200
nn
02
Type :V-VL
Type
L
V
3
VL
4,5
nn = number of LF contacts
Calculation :
CMM 100
CMM 200
A = (nn x 2) - 2
A = nn - 2
B =A + 5
B =A + 5
Refer to dimension table on cover page
23
CMM 100 / 200 female
STRAIGHT SMT
Part numbering :
“1” = Series 100
“2” = Series 200
nn
02
Type : T-TL
nn = number of LF contacts
Calculation :
CMM 100
CMM 200
A = (nn x 2) - 2
A = nn - 2
B =A + 5
B =A + 5
Refer to dimension table on cover page
Optional: Packaging in reel available
upon request
nn min = 02
nn max = 25
nn min = 04
nn max = 50
nn min = 02
nn max = 25
nn min = 04
nn max = 50
CRIMP
Part numbering :
“1” = Series100
“2” = Series 200
nn
02
Type : S-C
nn = number of LF contacts
Type
Gauge
S
24-28
C
22
Calculation :
CMM 100
CMM 200
A = (nn x 2) - 2
A = nn - 2
B =A + 5
B =A + 5
Refer to dimension table on cover page
24
CMM 100 / 200 female
STRAIGHT PRESS FIT
Part numbering :
“1” = Series 100
“2” = Series 200
0 2 PF n n
nn = number of LF contacts
Calculation :
CMM 100
CMM 200
A = (nn x 2) - 2
A = nn - 2
B =A + 5
B =A + 5
Refer to dimension table on cover page
nn min = 02
nn max = 25
nn min = 04
nn max = 50
nn min = 02
nn max = 25
nn min = 04
nn max = 50
90° SMT
Part numbering :
“1” = Series 100
“2” = Series 200
02 R nn
nn = number of LF contacts
Optional: Packaging in reel available
upon request
Upon request only
25
26
CMM 220 with LF contacts
PART NUMBERING REMINDER
Code with Low Frequency
contacts only
Series
Gender
Termination
Style
Number
of LF
contacts
2 rows
n
Fixing
Hardware
n
1 male
Refer to pages
Refer to table
04 to 60
43 to 46
on page 7
22
2 female
27
CMM 220
Configuration
CONNECTOR SPACING
CONTACTS POSITIONS
28
CMM 220 male
STRAIGHT PCB
nn min = 04
nn max = 60
Part numbering :
Type : Y-YL
nn
221
See Fixing on page 43, 44
“Fxx” without fixing
nn = number of LF contacts
Type
L
Y
3
YL
4,5
Calculation :
A = nn - 2
B =A + 7
C = A + 12
Refer to dimension table on cover page
90° PCB
nn min = 04
nn max = 60
Part numbering :
Type : V-VL
nn
221
See Fixing on page 43, 44
“Fxx” without fixing
nn = number of LF contacts
Type
L
V
3
VL
4,5
Calculation :
A = nn - 2
B =A + 7
C = A + 12
Refer to dimension table on cover page
29
CMM 220 male
STRAIGHT SMT
nn min = 04
nn max = 60
Part numbering :
Type : T-TL
221
nn
See Fixing on page 43, 44
“Fxx” without fixing
nn = number of LF contacts
Optional: Packaging in reel available upon request
Calculation :
A = nn - 2
B =A + 7
C = A + 12
Refer to dimension table on cover page
90° SMT
nn min = 04
nn max = 60
Part numbering :
221Rnn
See Fixing on page 43, 44
“Fxx” without fixing
nn = number of LF contacts
Optional: Packaging in reel available upon request
Calculation :
A = nn - 2
B =A + 7
C = A + 12
Refer to dimension table on cover page
30
CMM 220 male
CRIMP
nn min = 04
nn max = 60
Part numbering :
Type : S-C
nn
221
See Fixing on page 43, 44
“Fxx” without fixing
nn = number of LF contacts
Type
Gauge
S
24-28
C
22
Calculation :
A = nn - 2
B =A + 7
C = A + 12
Refer to dimension table on cover page
31
CMM 220 female
STRAIGHT PCB
nn min = 04
nn max = 60
Part numbering :
Type : Y-YL
nn
222
See Fixing on page 45-46
“Mxx” without fixing
nn = number of LF contacts
Type
L
Y
3
YL
4,5
Calculation :
A = nn - 2
B =A + 7
C = A + 12
Refer to dimension table on cover page
90° PCB
nn min = 04
nn max = 60
Part numbering :
Type : V-VL
nn
222
See Fixing on page 45
“Mxx” without fixing
nn = number of LF contacts
Type
L
V
3
VL
4,5
Calculation :
A = nn - 2
B =A + 7
C = A + 12
Refer to dimension table on cover page
32
CMM 220 female
STRAIGHT SMT
nn min = 04
nn max = 60
Part numbering :
Type : T-TL
222
nn
See Fixing on page 45-46
“Mxx” without fixing
nn = number of LF contacts
Optional: Packaging in reel available upon request
Calculation :
A = nn - 2
B =A + 7
C = A + 12
Refer to dimension table on cover page
90° SMT
nn min = 04
nn max = 60
Part numbering :
222Rnn
See Fixing on page 45
“Mxx” without fixing
nn = number of LF contacts
Optional: Packaging in reel available upon request
Calculation :
A = nn - 2
B =A + 7
C = A + 12
Refer to dimension table on cover page
33
CMM 220 female
STRAIGHT PRESS FIT
nn min = 04
nn max = 60
Part numbering :
2 2 2 PF n n
See Fixing on page 45-46
“Mxx” without fixing
nn = number of LF contacts
Calculation :
A = nn - 2
B =A + 7
C = A + 12
Refer to dimension table on cover page
CRIMP
nn min = 04
nn max = 60
Part numbering :
Type : S-C
nn
222
See Fixing on page 45-46
“Mxx” without fixing
nn = number of LF contacts
Type
Gauge
S
24-28
C
22
Calculation :
A = nn - 2
B =A + 7
C = A + 12
Refer to dimension table on cover page
34
CMM 220 mixed-layout
PART NUMBERING REMINDER
Code with Low Frequency
contacts only
Series
Gender
Termination
Style
Number
of LF
contacts
2 rows
n
Fixing
Hardware
n
1 male
Refer to pages
Refer to table
04 to 60
43 to 46
on page 7
22
2 female
Additional code for mixed-layout
connector (HF/HP)
Number of HF/HP
contacts pin 1 side
(LF contact number 1)
y
y
Number of HF/HP
contacts opposite to
LF contact number 1
z
HF/HP
Contact Type
z
Depends upon the number of LF contacts
If use with shifted central key, please refer to page 42
HF / HP : 15 contacts max.
Type of HF/HP contact : please refer to pages 8-9
HP/HF
30
please refer
to pages
75 to 94
35
CMM 220
Male mixed-layout
STRAIGHT PCB
Part numbering :
Number of contacts
LF pin 1 side
221
nn
Type : Y-YL
Number of contacts
opposite side LF pin 1
- y y z z See Fixing on page 43, 44
“Fxx” without fixing
HF or HP P/N
refer to page 75
nn = number of LF contacts
Type
L
Y
3
YL
4,5
Pattern for special contact :
A = nn - 2
B = {(yy+zz)x4} + A + 7
Bmax. = 65 mm
C=B+5
STRAIGHT PCB FOR HP/HF CONTACTS ONLY
Part numbering :
Number of HF or
HP contacts
221D00
- 00 z z -
See Fixing on page 43, 44
“Fxx” without fixing
HF or HP P/N
refer to page 75
Pattern for special contact :
A = (zz x 4) - 4
B =A + 9
C=B+5
Refer to dimension table
on cover page
36
Special contacts min. : 02
max. : 15
CMM 220
Male mixed-layout
90° PCB
Part numbering :
Number of contacts
LF pin 1 side
221
nn
Type : V-VL
Number of contacts
opposite side LF pin 1
- y y z z See Fixing on page 43, 44
“Fxx” without fixing
HF or HP P/N
refer to page 75
nn = number of LF contacts
Type
L
V
3
VL
4,5
Pattern for special contact :
A = nn - 2
B = {(yy+zz)x4} + A + 7
Bmax. = 65 mm
C=B+5
90° PCB FOR HP/HF CONTACTS ONLY
Part numbering :
Number of HF or
HP contacts
221D00
- 00 z z -
See Fixing on page 43, 44
“Fxx” without fixing
HF or HP P/N
refer to page 75
Pattern for special contact :
A = (zz x 4) - 4
B =A + 9
C=B+5
Special contacts min. : 02
max. : 15
Refer to sizes information
table on cover page
37
CMM 220
Male mixed-layout
CRIMP
Part numbering :
Number of contacts
LF pin 1 side
221
nn
Type : S-C
Number of contacts
opposite side LF pin 1
- y y z z See Fixing on page 43, 44
“Fxx” without fixing
HF or HP P/N
refer to page 75
nn = number of LF contacts
Type
Gauge
S
24-28
C
22
A = nn - 2
B = {(yy+zz)x4} + A + 7
Bmax. = 65 mm
C=B+5
CRIMP FOR HP/HF CONTACTS ONLY
Part numbering :
Number of HF or
HP contacts
221 E 00
- 00 z z -
See Fixing on page 43, 44
“Fxx” without fixing
HF or HP P/N
refer to page 75
A = (zz x 4) - 4
B =A + 9
C=B+5
Refer to dimension table
on cover page
38
Special contacts min. : 02
max. : 15
CMM 220
Female mixed-layout
STRAIGHT PCB
Part numbering :
Number of contacts
LF pin 1 side
222
nn
Type : Y-YL
Number of contacts
opposite side LF pin 1
- y y z z See Fixing on page 45
“Mxx” without fixing
HF or HP P/N
refer to page 75
nn = number of LF contacts
Type
L
Y
3
YL
4,5
Pattern for special contact :
A = nn - 2
B = {(yy+zz)x4} + A + 7
Bmax. = 65 mm
C=B+5
STRAIGHT PCB FOR HP/HF CONTACTS ONLY
Part numbering :
Number of HF or
HP contacts
222D00
- 00 z z -
See Fixing on page 45
“Mxx” without fixing
HF or HP P/N
refer to page 75
Pattern for special contact :
Special contacts min. : 02
max. : 15
A = (zz x 4) - 4
B =A + 9
C=B+5
Refer to dimension table
on cover page
39
CMM 220
Female mixed-layout
90° PCB
Part numbering :
Number of contacts
LF pin 1 side
222
nn
Type : V-VL
Number of contacts
opposite side LF pin 1
- y y z z See Fixing on page 45
“Mxx” without fixing
HF or HP P/N
refer to page 75
nn = number of LF contacts
Type
L
V
3
VL
4,5
Pattern for special contact :
A = nn - 2
B = {(yy+zz)x4} + A + 7
Bmax. = 65 mm
C=B+5
90° PCB FOR HP/HF CONTACTS ONLY
Part numbering :
Number of HF or
HP contacts
222D00
- 00 z z -
See Fixing on page 45
“Mxx” without fixing
HF or HP P/N
refer to page 75
Pattern for special contact :
A = (zz x 4) - 4
B =A + 9
C=B+5
Refer to dimension table
on cover page
40
Special contacts min. : 02
max. : 15
CMM 220
Female mixed-layout
CRIMP
Part numbering :
Number of contacts
LF pin 1 side
222
nn
Type : S-C
Number of contacts
opposite side LF pin 1
- y y z z See Fixing on page 45
“Mxx” without fixing
HF or HP P/N
refer to page 75
nn = number of LF contacts
Type
Gauge
S
24-28
C
22
A = nn - 2
B = {(yy+zz)x4} + A + 7
Bmax. = 65 mm
C=B+5
CRIMP FOR HP/HF CONTACTS ONLY
Part numbering :
Number of HF or
HP contacts
222 E 00
- 00 z z -
See Fixing on page 45
“Mxx” without fixing
HF or HP P/N
refer to page 75
A = (zz x 4) - 4
B =A + 9
C=B+5
Special contacts min. : 02
max. : 15
Refer to dimension table
on cover page
41
Part numbering with
shifted polarization key position
PART NUMBERING
Digits to be added
2 2
n n
- y y z z -
Number of LF contacts
nn min. = 06
(k
=
- k l l
Polarized key direction shifted
from the housing center
(k = 1 direction of contact LF number 1)
2 opposite direction to LF contact number 1)
Polarized key shift
value compared
to the housing center
(each shift = 2 mm)
EXPLANATION
221
2 4 Fxx - 2 0 4
221
1 0 Fxx - 0 2 0 3 -
- 103
221
0 0 Fxx - 0 0 1 1 -
- 103
EXAMPLES
42
221
1 0 Fxx - 0 2 0 3 -
- 103
221
0 0 Fxx - 0 0 1 1 -
- 103
222
1 0 Mxx - 0 2 0 3 -
- 103
222
0 0 Mxx - 0 0 1 1 -
- 103
Fixing hardware interconnection
table for CMM 220
Straight
F22
F22H
OK
OK
OK
OK
F24
F24H
OK
OK
OK
OK
F63
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
A
A
A
A
F63L F27 F34 F21 F60 F61 F62
F62H
OK OK OK
OK
OK OK OK
OK
OK OK OK
OK
OK OK OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
A
A
0,8 min 1,5 min 6
2 max 4 max max
F22
F24
OK
OK
OK
OK
OK
OK
OK
OK
4
max
F24L F25 F26
F23
OK OK OK
OK OK OK
OK OK OK
OK OK OK
2,5 4,5 1,6 3,2
max max max max
F30
F30H
OK
OK
OK
OK
F31 F63 F63L F2xx
F31H
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
A
A
A
A
F21 F60 F61 F62 F28
OK
OK
OK
OK
OK
OK
OK
OK
A
A
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
1,5 min. M12L
4 max. M49
OK
OK
OK
OK
OK
OK
OK
OK
OK
M1xx
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
B
B
OK
OK
OK
OK
Racking
With
cover
Contacts on cable
90°
Straight
No fixing
on PCB
220
Floating
2,5 4,5
1,6 3,2
max. max. max. max.
F24L F25 F26 F30 F31
F23 F30H F31H
OK OK OK OK
OK
OK OK OK OK
OK
OK OK OK OK
OK
OK OK OK OK
OK
OK
1,5 min.
2,5 max.
1,5 min.
4 max.
4
max.
Racking
0,8 min. 1,5 min. 6
2 max. 4 max. max.
OK
Floating
90°
With cover Without
Locked
Straight
Contacts on cable
Smooth
Without
90°
Locked
Straight
Straight
Fixing
0,8 min. M12
2 max. M12H
M12L
1,5 min. M12LH
4 max.
M49
M49H
1,5 min. M46
2,5 max.
M46H
1,5 min. M47
4 max. M47H
M21
1,6
3,2
M21L
1,6
M48
M48M
2
M48L
3,2
M16
M11
0,8 min. M12
2 max.
Straight
CMM SERIES
No fixing
on PCB
Housing
assembly
Smooth
PCB Contacts
220
CMM SERIES
FEMALE CONNECTORS
PCB thickness
(mm)
PCB Contacts
90°
Card edge
only HF
Card edge
HF & LF
MALE CONNECTORS
Type of contact in connector
Type of PCB mount
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK OK
OK
OK
OK
OK
OK OK
OK
OK
OK
OK
OK
OK
OK OK
OK
OK
OK
OK
OK OK
OK
OK
OK
OK
OK
OK
OK OK
OK
OK
OK
OK
OK OK
M46
OK
OK
OK
OK
OK
OK
M47
OK
OK
OK
OK
OK
OK
1,6
M21
OK
OK
OK
A
A
A
OK
OK
OK
A
A
A
OK
OK
3,2
M21L
OK
OK
OK
A
A
A
OK
OK
OK
A
A
A
OK
OK
1,6
M48
OK
OK
2
M48M
OK
OK
3,2
M48L
OK
OK
B
B
M16
M11
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
M18
OK
OK
OK
B
B
B
OK
OK
OK
OK
OK
OK
B
B
B
OK
OK
OK
Make it a habit! Use easy & automatic configurators for CMM micro-connectors single part and mating-half construction on www.nicomatic.com.
Recommended Torque : 0,2 N/m
Except 0,4 N/m for M46/M47
FIXING HARDWARE FOR CMM 220 MALE
REFERENCE
ASSEMBLY
ON
PCB
OVERALL
DIMENSIONS
RECOMMENDATION
F27
F27 : CMM male : Card edge
for HF contact
30-1500-CMM
F34
F34 : CMM male : Card edge
LF contact or mixed
F28 : CMM male : S-C (E : straight)
F28
Please refer to the CMM Catalogue Guidelines for any other fixing not listed here.
43
Fixing for CMM 220 male
FIXING HARDWARE FOR CMM 220 MALE
REFERENCE
ASSEMBLY
ON
PCB
OVERALL
DIMENSIONS
RECOMMENDATION
Straight on PCB
F21 :
CMM male :
Y-YL-T-S-C
(D-E : straight)
F21
F22 : CMM male :
Y-T-S-C
(D-E : straight)
Straight on PCB
0,8 min / 2 max
F22
F22H : CMM male :
Y-T
(D : straight)
F22H
F24 : CMM male :
YL-T-S-C
(D-E : straight)
Straight on PCB
1,5 min / 4 max
F24
F24H : CMM male :
YL-T
(D : straight)
F24H
Straight on PCB 6 max
F24L :
CMM male :
T-TL
(D-E : straight)
F24L
F2xx
xx = (PCB
thickness +
0,2 mm) x 10
Example : for 3 mm
PCB, the reference
is F232
(3 + 0,2) x 10 = 32
xx = 32
Straight on PCB
with floating option
F2xx :
CMM male :
S-C
(E : straight)
90° on PCB
F25 :
CMM male :
V-VL-R-S-C-E
(D : 90°)
F25
90° on PCB
F26
F26/F23 :
CMM male :
V-VL-R-S-C-E
(D : 90°)
F23
90° on PCB 2,5 max.
F30
F30 & F30H:
CMM male :
V-R-C-S-E
(D : 90°)
F30H
90° on PCB 4,5 max.
F31
F31H
Please refer to the CMM Catalogue Guidelines for any other fixing not listed here.
44
F31 & F31H:
CMM male :
VL-R-C-S-E
(D : 90°)
Fixing for CMM 220 female
FIXING HARDWARE FOR CMM 220 FEMALE
HEXAGONAL
REFERENCE
STANDARD
NUT
ASSEMBLY
ON
"W"
NUT
PCB
OVERALL
CODE FOR ADDITIONAL WASHER
DIMENSIONS
RECOMMENDATION
Straight on PCB
M16
M16/M11 :
CMM Female :
Y-YL-T-S-C-E
(D : straight)
M11
Straight on PCB 0,8 min / 2 max
M12 : CMM female :
Y-T-S-C
(D-E : straight)
M12
M12H : CMM female :
Y-T
(D : straight)
M12H
Straight on PCB 1,5 min / 4 max
M12L
M12LH : CMM female :
YL-T
(D : straight)
M12LH
M1xx
xx = (PCB
Straight on PCB with floating option
thickness +
0,2 mm) x 10
Example : for 3 mm
PCB, the reference
is M132
(3 + 0,2) x 10 = 32
xx = 32
M21
for PCB 1,6 mm
(L = 4 mm)
M12L : CMM female :
Y-T-S-C
(D-E : straight)
M1xx :
CMM female :
S-C
(E : straight)
90° on PCB
M21 : CMM Female :
V-R-S-C-E
(D : 90°)
M21L : CMM Female :
VL-R-S-C-E
(D : 90°)
M21L
for PCB 3,2 mm
(L = 5 mm)
Cover option
M18 :
CMM female : S-C
(E : straight)
M18
Please refer to the CMM Catalogue Guidelines for any other fixing not listed here.
45
Other fixing hardware for CMM 220
FIXING HARDWARE FOR CMM 220 FEMALE/MALE
REFERENCE
ASSEMBLY
ON
PCB
Straight on PCB 1,5 min. / 2,5 max.
M46
OVERALL
DIMENSIONS
RECOMMENDATION
M46 : CMM female :
Y-T-S-C
(D-E : straight)
M46H : CMM female :
Y-T
(D : straight)
M46H
Straight on PCB 1,5 min. / 4 max.
M47
M47 : CMM female :
YL-T-S-C
(D-E : straight)
M47H : CMM female :
YL-T
(D : straight)
M47H
M48
for PCB 1,6 mm
(L = 3 mm)
90° on PCB
M48M
for PCB 2 mm
(L = 4 mm)
M48 / M48M / M48L : CMM female :
V-VL-R-S-C-E
(D : 90°)
M48L
for PCB 3,2 mm
(L = 5 mm)
Straight on PCB
M49
M49 : CMM female :
Y-T-S-C
(D-E : straight)
M49H : CMM female :
Y-T
(D : straight)
M49H
Straight on PCB
F60 : CMM male :
Y-YL-T-S-C-E
(D : straight)
F60
Straight on PCB
F61 : CMM male :
Y-YL-T-S-C-E
(D : straight)
F61
Racking
F62
F62H : CMM male :
Y-T
(D : straight)
F62H
90° on PCB
F63
for PCB
1,6 mm
F63 : CMM male :
V-R-S-C-E
(D : 90°)
F63L : CMM male :
VL-R-S-C-E
(D : 90°)
F63L
for PCB
3,2 mm
M46 M46H M47 M47H
46
F62 : CMM male :
Y-T-S-C
(D-E : straight)
CMM 320 with LF contacts
PART NUMBERING REMINDER
Code with Low Frequency
contacts only
Series
Gender
Termination
Style
Number
of LF
contacts
Fixing
Hardware
3 rows
n n n
1 male
Refer to pages
Refer to table
006 to 120
69 to 74
on page 7
32
2 female
47
CMM 320
Configuration
CONNECTOR SPACING
CONTACTS POSITIONS
48
CMM 320 Male
STRAIGHT PCB FOR LF CONTACTS ONLY
Part numbering :
Type : Y-YL
nnn
321
See Fixing on pages 69 to 74
“Fxx” without fixing
nnn = number of LF contacts
Type
L
Y
3
YL
4,5
nnn min = 006
nnn max = 120
A=
nnn x 2
-2
3
B =A + 9
C = A + 15
Refer to dimension table
on cover page
90° PCB FOR LF CONTACTS ONLY
Part numbering :
Type : V-VL
nnn
321
See Fixing on pages 69 to 74
“Fxx” without fixing
nnn = number of LF contacts
Type
L
V
3
VL
4,5
nnn min = 006
nnn max = 120
A=
nnn x 2
-2
3
B =A + 9
C = A + 15
Refer to dimension table
on cover page
49
CMM 320 Male
90° SMT FOR LF CONTACTS ONLY
Part numbering :
321Rnnn
See Fixing on pages 69 to 74
“Fxx” without fixing
nnn = number of LF contacts
Optional: Packaging in reel available upon request
nnn min = 006
nnn max = 120
A=
nnn x 2
-2
3
B =A + 9
C = A + 15
Refer to dimension table
on cover page
CRIMP FOR LF CONTACTS ONLY
Part numbering :
Type : S-C
321
nnn
See Fixing on pages 69 to 74
“Fxx” without fixing
nnn = number of LF contacts
Type
Gauge
S
24-28
C
22
nnn min = 006
nnn max = 120
A=
nnn x 2
-2
3
B =A + 9
C = A + 15
Refer to dimension table
on cover page
50
CMM 320 Female
STRAIGHT PCB FOR LF CONTACTS ONLY
Part numbering :
Type : Y-YL
nnn
322
See Fixing on pages 69 to 74
“Mxx” without fixing
nnn = number of LF contacts
Type
L
Y
3
YL
4,5
nnn min = 006
nnn max = 120
A=
nnn x 2
-2
3
B =A + 9
C = A + 15
Refer to dimension table
on cover page
90° PCB FOR LF CONTACTS ONLY
Part numbering :
Type : V-VL
nnn
322
See Fixing on pages 69 to 74
“Mxx” without fixing
nnn = number of LF contacts
Type
L
V
3
VL
4,5
nnn min = 006
nnn max = 120
A=
nnn x 2
-2
3
B =A + 9
C = A + 15
Refer to dimension table
on cover page
51
CMM 320 Female
CRIMP FOR LF CONTACTS ONLY
Part numbering :
Type : S-C
322
nnn
See Fixing on pages 69 to 74
“Mxx” without fixing
nnn = number of LF contacts
Type
Gauge
S
24-28
C
22
nnn min = 006
nnn max = 120
A=
nnn x 2
-2
3
B =A + 9
C = A + 15
Refer to dimension table
on cover page
52
CMM 320 with mixed-layout
PART NUMBERING REMINDER
Code with Low Frequency
contacts only
Series
Gender
Termination
Style
Number
of LF
contacts
Fixing
Hardware
3 rows
n n n
Refer to table
Refer to pages
006 to 120
on page 7
69 to 74
2 female
Number of HF/HP
contacts pin 1 side
(LF contact number 1)
y
y
Number of HF/HP
contacts opposite to
LF contact number 1
z
HF/HP
Contact Type
z
Depends upon the number of LF contacts
1 male
32
Additional code for mixed-layout
connector (HF/HP)
HF / HP : 20 contacts max.
Type of HF/HP contact : please refer to pages 8-9
HF/HP
30
please refer
to pages
75 to 94
53
CMM 320
Male mixed-layout
STRAIGHT PCB
Part numbering :
Number of contacts
LF pin 1 side
nnn
321
Type : Y-YL
Number of contacts
opposite side LF pin 1
- y y z z See Fixing on pages 69 to 74
“Fxx” without fixing
HF or HP P/N
refer to page 75
nnn = number of LF contacts
Type
L
Y
3
YL
4,5
Pattern for special contact :
A=
{(yy+zz)x4+nnn}x2
-2
3
B =A + 9
B max. = 87
C = A + 15
STRAIGHT PCB FOR HP/HF CONTACTS ONLY
Part numbering :
Number of HF or
HP contacts
3 2 1D0 0 0
- 00 z z -
See Fixing on pages 69 to 74
“Fxx” without fixing
HF or HP P/N
refer to page 75
Pattern for special contact :
A = (zz x 4) - 4
B = A + 11
C = A + 17
54
Special contacts min. : 02
max. : 20
CMM 320
Male mixed-layout
90° PCB
Part numbering :
Number of contacts
LF pin 1 side
nnn
321
Number of contacts
opposite side LF pin 1
- y y z z -
See Fixing on pages 69 to 74
“Fxx” without fixing
nnn = number of LF contacts
Type : V-VL
Type
HF or HP P/N
refer to page 75
L
V
3
VL
4,5
Pattern for special contact :
A=
{(yy+zz)x4+nnn}x2
-2
3
B =A + 9
B max. = 87
C = A + 15
Special contacts mounted
90° PCB FOR HP/HF CONTACTS ONLY
Part numbering :
Number of HF or
HP contacts
3 2 1D0 0 0
- 00 z z -
See Fixing on pages 69 to 74
“Fxx” without fixing
HF or HP P/N
refer to page 75
Pattern for special contact :
A = (zz x 4) - 4
B = A + 11
C = A + 17
Special contacts min. : 02
max. : 20
55
CMM 320
Male mixed-layout
CRIMP
Part numbering :
Number of contacts
LF pin 1 side
321
nnn
Type : S-C
Number of contacts
opposite side LF pin 1
- y y z z See Fixing on pages 69 to 74
“Fxx” without fixing
HF or HP P/N
refer to page 75
nnn = number of LF contacts
Type
Gauge
S
24-28
C
22
A=
{(yy+zz)x4+nnn}x2
-2
3
B =A + 9
B max. = 87
C = A + 15
CRIMP FOR HP/HF CONTACTS ONLY
Part numbering :
Number of HF or
HP contacts
321 E 00 0
- 00 z z -
See Fixing on pages 69 to 74
“Fxx” without fixing
HF or HP P/N
refer to page 75
A = (zz x 4) - 4
B = A + 11
C = A + 17
56
Special contacts min. : 02
max. : 20
CMM 320
Female mixed-layout
STRAIGHT PCB
Part numbering :
Number of contacts
LF pin 1 side
nnn
322
Type : Y-YL
Number of contacts
opposite side LF pin 1
- y y z z See Fixing on pages 69 to 74
“Mxx” without fixing
HF or HP P/N
refer to page 75
nnn = number of LF contacts
Type
L
Y
3
YL
4,5
Pattern for special contact :
A=
{(yy+zz)x4+nnn}x2
-2
3
B =A + 9
B max. = 87
C = A + 15
STRAIGHT PCB FOR HP/HF CONTACTS ONLY
Part numbering :
Number of HF or
HP contacts
3 2 2D0 0 0
- 00 z z -
See Fixing on pages 69 to 74
“Mxx” without fixing
HF or HP P/N
refer to page 75
Pattern for special contact :
A = (zz x 4) - 4
B = A + 11
C = A + 17
Special contacts min. : 02
max. : 20
57
CMM 320
Female mixed-layout
90° PCB
Part numbering :
Number of contacts
LF pin 1 side
nnn
322
Type : V-VL
Number of contacts
opposite side LF pin 1
- y y z z See Fixing on pages 69 to 74
“Mxx” without fixing
HF or HP P/N
refer to page 75
nnn = number of LF contacts
Type
L
V
3
VL
4,5
Pattern for special contact :
A=
{(yy+zz)x4+nnn}x2
-2
3
B =A + 9
B max. = 87
C = A + 15
Special contacts mounted
90° PCB FOR HP/HF CONTACTS ONLY
Part numbering :
Number of HF or
HP contacts
3 2 2D0 0 0
- 00 z z -
See Fixing on pages 69 to 74
“Mxx” without fixing
HF or HP P/N
refer to page 75
Pattern for special contact :
A = (zz x 4) - 4
B = A + 11
C = A + 17
58
Special contacts min. : 02
max. : 20
CMM 320
Female mixed-layout
CRIMP
Part numbering :
Number of contacts
LF pin 1 side
322
nnn
Type : S-C
Number of contacts
opposite side LF pin 1
- y y z z See Fixing on pages 69 to 74
“Mxx” without fixing
HF or HP P/N
refer to page 75
nnn = number of LF contacts
Type
Gauge
S
24-28
C
22
A=
{(yy+zz)x4+nnn}x2
-2
3
B =A + 9
B max. = 87
C = A + 15
CRIMP FOR HP/HF CONTACTS ONLY
Part numbering :
Number of HF or
HP contacts
322 E 00 0
- 00 z z -
See Fixing on pages 69 to 74
“Mxx” without fixing
HF or HP P/N
refer to page 75
A = (zz x 4) - 4
B = A + 11
C = A + 17
Special contacts min. : 02
max. : 20
59
60
CMM 340
PART NUMBERING REMINDER
Code with Low Frequency
contacts only
Series
Gender
Termination
Style
Number
of LF
contacts
Fixing
Hardware
3 rows
n n n
1 male
34
2 female
Additional code for mixed-layout
connector (HF/HP)
Number of HF/HP
contacts pin 1 side
(LF contact number 1)
y
y
Number of HF/HP
contacts opposite to
LF contact number 1
z
z
Depends upon the number of LF contacts
Refer to table Refer to Refer to pages
the series
69 to 74
on page 7
320
HF/HP
Contact Type
HF / HP : 64 contacts max.
Type of HF/HP contact : please refer to pages 10-11
HP/HF
22
please refer
to pages
95 to 102
61
CMM 340
Configuration
CONNECTOR SPACING
CONTACTS POSITIONS
62
CMM 340
Male mixed-layout
STRAIGHT PCB
Part numbering :
Number of contacts
LF pin 1 side
nnn
341
Type : Y-YL
Number of contacts
opposite side LF pin 1
- y y z z See Fixing on pages 69 to 74
“Fxx” without fixing
HF or HP P/N
refer to page 95
nnn = number of LF contacts
Type
L
Y
3
YL
4,5
A=
Pattern for special contact :
{
}
(nnnx2)
-2
3
if yy and zz ≠ 0 :
B=
{(
)}
(yy)+(zz) -2 x 2,5+14,5+A
2
if yy or zz = 0 :
{(
)}
B = (yy)or(zz) -1 x 2,5+11,75+A
2
B max. = 87
C=B+6
STRAIGHT PCB FOR HP/HF CONTACTS ONLY
Part numbering :
Number of HF
or HP contacts
3 4 1D0 0 0
- 00 z z -
See Fixing on pages 69 to 74
“Fxx” without fixing
HF or HP P/N
refer to page 95
Pattern for special contact :
(
)
A = (zzx2,5) -2,5
2
Special contacts min. : 04
max. : 64
B = A + 10
C=B+6
Refer to dimension table
on cover page
63
CMM 340
Male mixed-layout
90° PCB
Part numbering :
Number of contacts
LF pin 1 side
nnn
341
Type : V-VL
Number of contacts
opposite side LF pin 1
- y y z z See Fixing on pages 69 to 74
“Fxx” without fixing
HF or HP P/N
refer to page 95
nnn = number of LF contacts
Type
L
V
3
VL
4,5
A=
Pattern for special contact :
{
}
(nnnx2)
-2
3
if yy and zz ≠ 0 :
B=
{(
)}
(yy)+(zz) -2 x 2,5+14,5+A
2
if yy or zz = 0 :
{(
)}
B = (yy)or(zz) -1 x 2,5+11,75+A
2
B max. = 87
C=B+6
90° PCB FOR HP/HF CONTACTS ONLY
Part numbering :
Number of HF
or HP contacts
3 4 1D0 0 0
- 00 z z -
See Fixing on pages 69 to 74
“Fxx” without fixing
HF or HP P/N
refer to page 95
Pattern for special contact :
Special contacts min. : 04
max. : 64
(
)
A = (zzx2,5) -2,5
2
B = A + 10
C=B+6
Refer to dimension table
on cover page
64
CMM 340
Male mixed-layout
CRIMP
Part numbering :
Number of contacts
LF pin 1 side
nnn
341
Type : S-C
Number of contacts
opposite side LF pin 1
- y y z z See Fixing on pages 69 to 74
“Fxx” without fixing
HF or HP P/N
refer to page 95
nnn = number of LF contacts
Type
Gauge
S
24-28
C
22
A=
{
}
(nnnx2)
-2
3
if yy and zz ≠ 0 :
B=
{(
)}
(yy)+(zz) -2 x 2,5+14,5+A
2
if yy or zz = 0 :
{(
)}
B = (yy)or(zz) -1 x 2,5+11,75+A
2
B max. = 87
C=B+6
CRIMP FOR HP/HF CONTACTS ONLY
Part numbering :
Number of HF
or HP contacts
341 E 00 0
- 00 z z -
See Fixing on pages 69 to 74
“Fxx” without fixing
HF or HP P/N
refer to page 95
(
)
A = (zzx2,5) -2,5
2
Special contacts min. : 04
max. : 64
B = A + 10
C=B+6
Refer to dimension table
on cover page
65
CMM 340
Female mixed-layout
STRAIGHT PCB
Part numbering :
Number of contacts
LF pin 1 side
nnn
342
Type : Y-YL
Number of contacts
opposite side LF pin 1
- y y z z See Fixing on pages 69 to 74
“Mxx” without fixing
HF or HP P/N
refer to page 95
nnn = number of LF contacts
Type
L
Y
3
YL
4,5
A=
Pattern for special contact :
{
}
(nnnx2)
-2
3
if yy and zz ≠ 0 :
B=
{(
)}
(yy)+(zz) -2 x 2,5+14,5+A
2
if yy or zz = 0 :
{(
)}
B = (yy)or(zz) -1 x 2,5+11,75+A
2
B max. = 87
C=B+6
STRAIGHT PCB FOR HP/HF CONTACTS ONLY
Part numbering :
Number of HF
or HP contacts
3 4 2D0 0 0
- 00 z z -
See Fixing on pages 69 to 74
“Mxx” without fixing
HF or HP P/N
refer to page 95
Pattern for special contact :
Special contacts min. : 04
max. : 64
(
)
A = (zzx2,5) -2,5
2
B = A + 10
C=B+6
Refer to dimension table
on cover page
66
CMM 340
Female mixed-layout
90° PCB
Part numbering :
Number of contacts
LF pin 1 side
nnn
342
Type : V-VL
Number of contacts
opposite side LF pin 1
- y y z z See Fixing on pages 69 to 74
“Mxx” without fixing
HF or HP P/N
refer to page 95
nnn = number of LF contacts
Type
L
V
3
VL
4,5
A=
Pattern for special contact :
{
}
(nnnx2)
-2
3
if yy and zz ≠ 0 :
B=
{(
)}
(yy)+(zz) -2 x 2,5+14,5+A
2
if yy or zz = 0 :
{(
)}
B = (yy)or(zz) -1 x 2,5+11,75+A
2
B max. = 87
C=B+6
90° PCB FOR HP/HF CONTACTS ONLY
Part numbering :
Number of HF
or HP contacts
3 4 2D0 0 0
- 00 z z -
See Fixing on pages 69 to 74
“Mxx” without fixing
HF or HP P/N
refer to page 95
Pattern for special contact :
(
)
A = (zzx2,5) -2,5
2
Special contacts min. : 04
max. : 64
B = A + 10
C=B+6
Refer to dimension table
on cover page
67
CMM 340
Female mixed-layout
CRIMP
Part numbering :
Number of contacts
LF pin 1 side
nnn
342
Type : S-C
Number of contacts
opposite side LF pin 1
- y y z z See Fixing on pages 69 to 74
“Mxx” without fixing
HF or HP P/N
refer to page 95
nnn = number of LF contacts
Type
Gauge
S
24-28
C
22
A=
{
}
(nnnx2)
-2
3
if yy and zz ≠ 0 :
B=
{(
)}
(yy)+(zz) -2 x 2,5+14,5+A
2
if yy or zz = 0 :
{(
)}
B = (yy)or(zz) -1 x 2,5+11,75+A
2
B max. = 87
C=B+6
CRIMP FOR HP/HF CONTACTS ONLY
Part numbering :
Number of HF
or HP contacts
342 E 00 0
- 00 z z -
See Fixing on pages 69 to 74
“Mxx” without fixing
HF or HP P/N
refer to page 95
(
)
A = (zzx2,5) -2,5
2
B = A + 10
C=B+6
Refer to dimension table
on cover page
68
Special contacts min. : 04
max. : 64
Fixing hardware for
CMM SERIES 320/340
Male : 10 to 49
Female : 50 to 99
P X X X X
Letter coding : idem for male and female
Number coding : idem for male and female
Example : P10A1 mounting with P50A1
Letter code : A to F
Number code : 1 to 6
69
Fixing hardware for CMM 320/340
RACK INTERCONNECTION
90° Straight
0,8 min.
2 max.
1,5 min.
4 max.
4 max.
Straight
No fixing
on PCB
90°
SERIE
PCB Contacts
FEMALE CONNECTORS
320 & 340
0,8 min.
2 max.
M38
M38H
1,5 min.
4 max.
M36
M36H
M35
M35H
M39
M39H
RACK
Contacts on cable
Straight
90°
90°
0,8 min.
2 max.
1,5 min.
4 max.
0,8 min. 1,5 min.
2 max. 4 max.
4 max.
F58
F58H
F59
F59H
F48
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
A
H11
M35
M39
4 max.
F48
H11
No fixing
on PCB
Fixing
Contacts on cable
320 & 340
RACK
PCB thickness (mm)
CMM SERIES
PCB Contacts
Straight
Floating
MALE CONNECTORS
Type of contact in connector
Type of PCB mount
M3xx
F40
OK
OK
OK
OK
A
OK
OK
OK
OK
OK
H11
F48
OK
OK
OK
OK
A
OK
OK
A
OK
F40
OK
OK
OK
OK
OK
OK
OK
OK
OK
0,8 min.
2 max.
M35
OK
OK
OK
OK
OK
OK
OK
1,5 min.
4 max.
M39
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
A
4 max.
H11
F48
OK
OK
Floating
M3xx
No fixing
on PCB
F40
OK
OK
OK
OK
OK
A
A
OK
OK
OK
OK
OK
OK
OK
OK
A
OK
OK
OK
OK
OK
OK
A
OK
OK
OK
Card extension
Recommended Torque : 0,2 N/m
REFERENCE
ASSEMBLY
ON
PCB
Straight on PCB
F40
OVERALL
DIMENSIONS
RECOMMENDATION
F40 :
CMM female :
Y-YL-S-C-E
(D : straight)
CMM male :
S-C-E
90° on PCB 4 max.
F48
F48 :
CMM female :
V-VL-S-C-E
(D : 90°)
CMM male :
V-VL-R-S-C-E
(D : 90°)
Straight on PCB 0,8 min / 2 max
F58 :
CMM male : Y
(D : straight)
F58
F58H :
CMM male : Y
(D : straight)
F58H
Straight on PCB 1,5 min / 4 max
F59
F59H
F59 :
CMM male : YL
(D : straight)
F59H :
CMM male : YL
(D : straight)
Make it a habit! Use easy & automatic configurators for CMM micro-connectors single part and mating-half construction on www.nicomatic.com.
70
Fixing hardware for CMM 320/340
RACK INTERCONNECTION
HEXAGONAL
REFERENCE
STANDARD
NUT
ASSEMBLY
ON
PCB
Straight on PCB 0,8 min / 2 max
M35
NUT
OVERALL
DIMENSIONS
RECOMMENDATION
M35 :
CMM female : Y-S-C
(D-E : straight)
CMM male : S-C
(E : straight)
M35H :
CMM female : Y
(D : straight)
M35H
Straight on PCB 1,5 min / 4 max
M39
M39 :
CMM female : YL-S-C
(D-E : straight)
CMM male : S-C
(E : straight)
M39H :
CMM female : YL
(D : straight)
M39H
Straight on PCB 0,8 min / 2 max
M38 :
CMM male : Y
(D : straight)
M38
M38H :
CMM male : Y
(D : straight)
M38H
Straight on PCB 1,5 min / 4 max
M36 :
CMM male : YL
(D : straight)
M36
M36H :
CMM male : YL
(D : straight)
M36H
M3xx
xx = (PCB
Straight on PCB with floating option
thickness +
0,2 mm) x 10
Example : for 3 mm
PCB, the reference
is M332
(3 + 0,2) x 10 = 32
xx = 32
CMM male :
S-C
(E : straight)
90° on PCB 4 max.
H11
M3xx :
CMM female :
S-C
(E : straight)
H11 :
CMM female :
V-VL-S-C-E
(D : 90°)
CMM male :
V-VL-R-S-C-E
(D : 90°)
71
Fixing hardware for CMM 320/340
LOCKED INTERCONNECTION
MALE CONNECTORS
4 max. 1min. 2 min. 3 min.
2 max. 3 max. 4 max.
90°
LOCKING
Straight
0,8
1,5
min. min. 4 max.
2max. 4max.
F52
F45 F46 F51
1min. 2min. 3min.
2max. 3max. 4max.
H08 H08M H08L
F50 H01 H01C
OK
OK
OK
OK
A
OK
OK
OK
OK
A
OK
OK
OK
OK
A
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
H08 H08M H08L F4xx H01 H01C F41 F57 M45
OK
OK
OK
OK
A
OK
OK
OK
OK
A
OK
OK
OK
OK
A
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
B
A
A
A
OK
OK
A
A
A
OK
OK
B
OK
OK
OK
OK
A
A
OK
OK
A
A
OK
OK
B
2 min. H08M
OK
3 max.
OK
OK
OK
A
A
OK
OK
A
A
OK
OK
B
No fixing
on PCB
0,8 min.
2 max.
H08
OK
OK
OK
OK
A
A
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
A
A
OK
OK
B
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
F41
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
F52
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
1,5 min.
4 max.
F45
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
4 max.
F46
F51
A
A
A
A
A
A
OK
OK
OK
OK
A
A
A
A
A
A
OK
OK
OK
OK
B
B
1 min.
2 max.
H08
90°
Contacts on cable
FEMALE CONNECTORS
0,8 min. F52
2 max. F52H
1,5 min. F45
4 max. F45H
F46
4 max.
F51
3 min. H08L
4 max.
H01
No fixing
on PCB
H01C
CMM SERIES
320 & 340 WITH
PCB Contacts
Straight
Fixing F42 F42H F44 F44H F46 F51
1 min.
2 max.
Contacts on cable
90°
Straight
No fixing
on PCB
With
cover
With
cover
1,5 min.
4 max.
LOCKING
No fixing
on PCB
0,8 min.
2 max.
320 & 340 WITH
Floating
fixing
Straight
CMM SERIES
No fixing
on PCB
PCB thickness
(mm)
PCB Contacts
90°
Card edge
with 301500-12 HF
Type of contact in connector
Type of PCB mount
OK
OK
OK
OK
A
A
OK
OK
A
A
OK
OK
B
2 min.
3 max. H08M OK
OK
OK
OK
A
A
OK
OK
A
A
OK
OK
B
3 min.
4 max. H08L
OK
OK
OK
OK
A
A
OK
OK
A
A
OK
OK
B
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Floating fixing
F4xx
No fixing
on PCB
No fixing
on PCB
H01
H01C
F41
OK
OK
OK
With cover
F57
B
B
B
With cover
M45
OK
OK
OK
OK
OK
B
B
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
B
B
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
B
B
B
OK
OK
OK
OK
OK
Make it a habit! Use easy & automatic configurators for CMM micro-connectors single part and mating-half construction on www.nicomatic.com.
CMM 320/340 MALE AND FEMALE THREADED FIXING HARDWARE
REFERENCE
ASSEMBLY ON PCB
Straight on PCB
H01
72
DIMENSIONS
RECOMMENDATION
H01/H01C :
CMM female :
Y-YL-S-C-E (D : straight)
CMM male :
Y-YL-S-C-E (D : straight)
H01C
H08 PCB :
1 min. / 2 max.
H08M PCB :
2 min. / 3 max.
H08L PCB :
3 min. / 4 max.
OVERALL
90° on PCB
H08/H08M/H08L :
CMM female :
V-VL-S-C-E (D : 90°)
CMM male :
V-VL-R-S-C-E (D : 90°)
Fixing hardware for CMM 320/340
LOCKED INTERCONNECTION
HEXAGONAL
STANDARD
NUT
NUT
Recommended Torque : 0,2 N/m
REFERENCE
F4XX
ASSEMBLY
ON
PCB
OVERALL
DIMENSIONS
RECOMMENDATION
Straight on PCB floating option
F4XX :
CMM female :
S-C (E : straight)
xx = (PCB thickness
+ 0,2 mm) x 10
Example : for 3 mm
PCB, the reference is
F432 (3 + 0,2) x 10
= 32
xx = 32
CMM male :
S-C (E : straight)
Straight on PCB
F41 :
CMM female :
Y-YL-S-C-E (D : straight)
F41
CMM male :
S-C-E
Straight on PCB 0,8 min / 2 max
F52
F52 :
CMM female :
Y-S-C (D-E : straight)
CMM male :
S-C (E : straight)
F52H :
CMM female :
Y (D : straight)
F52H
Straight on PCB 1,5 min / 4 max
F45
F45 :
CMM female :
YL-S-C (D-E : straight)
CMM male :
S-C (E : straight)
F45H :
CMM female :
YL (D : straight)
F45H
Straight on PCB 0,8 min / 2 max
F42 :
CMM male :
Y (D : straight)
F42
F42H :
CMM male :
Y (D : straight)
F42H
Straight on PCB 1,5 min / 4 max
F44
F44H
F44 :
CMM male :
YL (D : straight)
F44H :
CMM male :
YL (D : straight)
73
Fixing for CMM 320/340
CMM 320/340 MALE AND FEMALE TAPPED FIXING HARDWARE
REFERENCE
ASSEMBLY
ON
PCB
OVERALL
DIMENSIONS
RECOMMENDATION
90° on PCB 4 max.
F46 :
CMM female :
V-VL-S-C-E (D : 90°)
F46
CMM male :
V-VL-R-S-C-E (D : 90°)
90° on PCB 4 max.
F51 :
CMM female :
V-VL-S-C-E (D : 90°)
F51
CMM male :
V-VL-R-S-C-E (D : 90°)
90° on PCB 4 max.
F50 :
Card edge
LF contact or mixed
F50
Cover option only
Male and female
S-C (E : straight)
F57
Cover option only
Male and female
S-C (E : straight)
M45
74
HF : High Frequency contacts series 30
HP : High Power contacts series 30
FOR CMM 220 AND 320
INSERTION
HF female contact insertion
HF male contact insertion
PART NUMBERING FOR PCB HF & HP SPECIAL CONTACTS
These two digits are linked
to the connector. Do not
use them inside a CMM part
number when loaded.
All dash signs also disappear
Termination length
“CMM” = 3mm
“45” = 4.5mm
“12” = 3mm (Female CMM320)
“14” = 4.5mm (Female CMM320)
“…”
Contact type :
3 = straight
4 = right angle
5 = SMT 90°
6 = SMT straight
30 -
00 -
Coaxmatic 30™
1 = male coax
2 = female coax
3 = high power male
4 = high power female
PART NUMBERING FOR HF & HP SPECIAL CONTACTS ON-CABLE
For HF contacts only Shield
Z = solder
S = crimp
For HF contacts only Inner contact
Z = solder
S = crimp
These two digits are linked
to the connector. Do not
use them inside a CMM part
number when loaded.
All dash signs also disappear
Contact type :
3 = straight
4 = right angle
-
- 75 -
{
30 -
Use these 2 digits only with 1.2mm dia.
cables mounted on a HF straight contact
Crimp shield type: 01 = refer to page 81
02 = refer to page 81
Special contacts :
1 = male HF
2 = female HF
3 = male HP
4 = female HP
Double
shield
DS
Use these 2 digits only with
75 Ohm cables
Contact termination:
10 = for HP 10A
15 = for HP 15A
20 = for HP 20A
12 = for HF cable 1.2mm
20 = for HF cable 2mm
24 = for HF cable 2.4mm
26 = for HF cable 2.6mm
47 = for HF cable type UT47
85 = for HF cable type UT85
“...”
75
HF : High Frequency contact series 30
MALE STRAIGHT ON PCB P/N 30-1300-xx
Loaded
Length L
1300CMM
3 mm
130045
4,5 mm
FEMALE STRAIGHT ON PCB P/N 30-2300-xx
Loaded
Length L
Loaded
2300CMM
3 mm
230012
Length L
3 mm
230045
4,5 mm
230014
4,5 mm
PCB LAYOUT 30-1300-xx & 30-2300-xx
A = nn - 2
B = {(yy + zz) x 4 } + A + 7
B max. = 65 mm
A=
[
B =A + 9
B max. = 87
76
]
{(yy + zz) x 4 + nn} x 2 - 2
3
HF : High Frequency contact series 30
MALE 90° PCB P/N 30-1400-xx
Loaded
Length L
1400CMM
3 mm
140045
4,5 mm
Loaded
Length L
PCB LAYOUT 30-1400-xx
FEMALE 90° PCB P/N 30-2400-xx
2400CMM
3 mm
240045
4,5 mm
PCB LAYOUT 30-2400-xx
A = nn - 2
B = {(yy + zz) x 4 } + A + 7
B max. = 65 mm
A=
[
]
{(yy + zz) x 4 + nn} x 2 - 2
3
B =A + 9
B max. = 87
77
HF : High Frequency contact series 30
MALE 90° SMT FOR CMM 220 SERIES (WITHOUT CONTACTS)
P/N 30-1500-CMM
PCB LAYOUT 30-1500-CMM
A = (nn x 4) - 4
B =A + 9
C=B+5
PART NUMBERING
Number of contacts
2 2 1 D 0 0 F27
78
00 z z
1 5 0 0 CMM
HF : High Frequency contact series 30
MALE 90° SMT FOR CMM 220 SERIES P/N 30-1500-12
PCB LAYOUT 30-1500-12
A = nn - 2
B = {(yy + zz) x 4 } + A + 7
B max. = 65 mm
C=B+5
PART NUMBERING
Number of contacts
opposite side LF pin 1
Number of contacts
LF pin 1 side
2 2 1 BR n n F34
y y z z
15001 2
Number of
LF contacts
79
HF : High Frequency contact series 30
MALE 90° SMT FOR CMM 320 SERIES P/N 30-1500-12
PCB LAYOUT 30-1500-CMM
A=
[
B =A + 9
B max. = 87
C = A + 15
PART NUMBERING
Number of contacts
opposite side LF pin 1
Number of contacts
LF pin 1 side
3 2 1 BR n n n F50
Number of
LF contacts
80
y y z z
15001 2
]
{(yy + zz) x 4 + nn} x 2 - 2
3
HF : High Frequency contact series 30
MALE STRAIGHT SMT FOR CMM 220 SERIES P/N 30-1600
FEMALE STRAIGHT SMT FOR CMM 220 SERIES P/N 30-2600
PCB LAYOUT 30-1600 & 30-2600
81
HF : High Frequency contact series 30
MALE STRAIGHT CRIMP ON CABLES Ø 1.2 P/N 30-1312-ZS
Cable assy instruction IC30HF01 on page 118
Loaded
Unloaded
ØB
ØC
1312ZS01
30-1312-ZS-01
1 mm
1,25 mm
For cable type NEXANS 50VMTX
1312ZS02
30-1312-ZS-02
0,85 mm
1,15 mm
For cable type AXON SM50
FEMALE STRAIGHT CRIMP ON CABLES Ø 1.2 P/N 30-2312-ZS
Cable assy instruction IC30HF01 on page 118
Loaded
82
Unloaded
ØB
ØC
2312ZS01
30-2312-ZS-01
1 mm
1,25 mm
For cable type NEXANS 50VMTX
2312ZS02
30-2312-ZS-02
0,85 mm
1,15 mm
For cable type AXON SM50
HF : High Frequency contact series 30
MALE STRAIGHT CRIMP ON CABLE P/N 30-13xx-SS & 30-13xx-ZS
Cable assy instruction IC30HF02 on page 119
Loaded
Unloaded
Cable A
ØB
ØC
ØD
Hex. E
1320SS
30-1320-SS
Ø 2,0
1 mm
2,2 mm
0,5 mm
2,4 on flat
1324SS
30-1324-SS
Ø 2,4
1,5 mm
2,8 mm
0,6 mm
2,8 on flat
1326SS
30-1326-SS
Ø 2,7
1,7 mm
2,8 mm
0,6 mm
2,8 on flat
FEMALE STRAIGHT CRIMP ON CABLE P/N 30-23xx-SS & 30-23xx-ZS
Cable assy instruction IC30HF02 on page 119
Loaded
Unloaded
Cable A
ØB
ØC
ØD
Hex. E
2320SS
30-2320-SS
Ø 2,0
1 mm
2,2 mm
0,5 mm
2,4 on flat
2324SS
30-2324-SS
Ø 2,4
1,5 mm
2,8 mm
0,6 mm
2,8 on flat
2326SS
30-2326-SS
Ø 2,7
1,7 mm
2,8 mm
0,6 mm
2,8 on flat
83
HF : High Frequency contact series 30
MALE 90° CRIMP ON CABLE P/N 30-14xx-ZS
Cable assy instruction
IC30HF03 on page 120
Loaded
Unloaded
Cable A
ØB
ØC
Hex. E
1412ZS
30-1412-ZS
Ø 1,2
0,7 mm
1,3 mm
1,9 on flat
1420ZS
30-1420-ZS
Ø 2,0
1 mm
2,2 mm
2,4 on flat
1424ZS
30-1424-ZS
Ø 2,4
1,5 mm
2,8 mm
2,8 on flat
1426ZS
30-1426-ZS
Ø 2,7
1,7 mm
2,8 mm
2,8 on flat
FEMALE 90° CRIMP ON CABLE P/N 30-24xx-ZS
Cable assy instruction
IC30HF03 on page 120
84
Loaded
Unloaded
Cable A
ØB
ØC
Hex. E
2412ZS
30-2412-ZS
Ø 1,2
0,7 mm
1,3 mm
1,9 on flat
2420ZS
30-2420-ZS
Ø 2,0
1 mm
2,2 mm
2,4 on flat
2424ZS
30-2424-ZS
Ø 2,4
1,5 mm
2,8 mm
2,8 on flat
2426ZS
30-2426-ZS
Ø 2,7
1,7 mm
2,8 mm
2,8 on flat
HF : High Frequency contact series 30
MALE STRAIGHT ON CABLE SEMI-RIGID P/N 30-13xx-ZZ
Loaded
Unloaded
Cable A
ØB
ØC
ØD
1347ZZ
30-1347-ZZ
UT 47
1,4 mm
1 mm
0,5 mm
1385ZZ
30-1385-ZZ
UT 85
2,3 mm
1,7 mm
0,6 mm
FEMALE STRAIGHT ON CABLE SEMI-RIGID P/N 30-23xx-ZZ
Loaded
Unloaded
Cable A
ØB
ØC
ØD
2347ZZ
30-2347-ZZ
UT 47
1,4 mm
1 mm
0,5 mm
2385ZZ
30-2385-ZZ
UT 85
2,3 mm
1,7 mm
0,6 mm
85
HF : High Frequency contact series 30
MALE 90° ON CABLE SEMI-RIGID P/N 30-14xx-ZZ
Loaded
Unloaded
Cable A
ØB
ØC
1447ZZ
30-1447-ZZ
UT 47
1,4 mm
1 mm
1485ZZ
30-1485-ZZ
UT 85
2,3 mm
1,7 mm
FEMALE 90° ON CABLE SEMI-RIGID P/N 30-24xx-ZZ
86
Loaded
Unloaded
Cable A
ØB
ØC
2447ZZ
30-2447-ZZ
UT 47
1,4 mm
1 mm
2485ZZ
30-2485-ZZ
UT 85
2,3 mm
1,7 mm
HP : High Power contact series 30
MALE STRAIGHT ON PCB P/N 30-3300-XX
Loaded
Length L
3300CMM
3 mm
330045
4,5 mm
FEMALE STRAIGHT ON PCB P/N 30-4300-XX
Loaded
Length L
Loaded
4300CMM
3 mm
430012
Length L
3 mm
430045
4,5 mm
430014
4,5 mm
PCB LAYOUT 30-3300-XX & 30-4300-XX
A = nn - 2
B = {(yy + zz) x 4 } + A + 7
B max. = 65 mm
A=
[
]
{(yy + zz) x 4 + nn} x 2 - 2
3
B =A + 9
B max. = 87
87
HP : High Power contact series 30
MALE 90° PCB P/N 30-3400-XX
Loaded
Length L
3400CMM
3 mm
340045
4,5 mm
Loaded
Length L
PCB LAYOUT 30-3400-XX
FEMALE 90° PCB P/N 30-4400-XX
4400CMM
3 mm
440045
4,5 mm
PCB LAYOUT 30-4400-XX
A = nn - 2
B = {(yy + zz) x 4 } + A + 7
B max. = 65 mm
A=
[
B =A + 9
B max. = 87
88
]
{(yy + zz) x 4 + nn} x 2 - 2
3
HP : High Power contact series 30
MALE 90° SMT 30-3500
PCB LAYOUT 30-3500
FEMALE 90° SMT 30-4500
PCB LAYOUT 30-4500
89
HP : High Power contact series 30
MALE STRAIGHT SMT P/N 30-3600
PCB LAYOUT 30-3600
FEMALE STRAIGHT SMT P/N 30-4600
PCB LAYOUT 30-4600
90
HP : High Power contact series 30
MALE 90° SMT CARD EDGE (WITHOUT LF CONTACTS) 30-3500-CMM
PCB LAYOUT 30-3500-CMM
A = (nn x 4) - 4
B =A + 9
C=B+5
PART NUMBERING
Number of contacts
2 2 1 D 0 0 F27
00 z z
3 5 0 0 CMM
91
HP : High Power contact series 30
MALE 90° SMT CARD EDGE 30-3500-12 (FOR CMM 220 SERIES)
PCB LAYOUT 30-3500-12
A = nn - 2
B = {(yy + zz) x 4 } + A + 7
B max. = 65 mm
C=B+5
PART NUMBERING
Number of contacts
opposite side LF pin 1
Number of contacts
LF pin 1 side
2 2 1 BR n n F34
Number of
LF contacts
92
y y z z
35001 2
HP : High Power contact series 30
MALE 90° SMT CARD EDGE 30-3500-12 (FOR CMM 320 SERIES)
PCB LAYOUT 30-3500-12
A=
[
]
{(yy + zz) x 4 + nn} x 2 - 2
3
B =A + 9
B max. = 87
C = A + 15
PART NUMBERING
Number of contacts
opposite side LF pin 1
Number of contacts
LF pin 1 side
3 2 1 BR n n n F50
y y z z
35001 2
Number of
LF contacts
93
HP : High Power contact series 30
MALE STRAIGHT ON CABLE P/N 30-33xx (solder or crimp)
Cable assy instruction
IC30HP02 on page 122
Loaded Unloaded Ampere
3305
30-3305
5A
3308
30-3308
8A
3310
30-3310
10A
3315
30-3315
15A
3320
30-3320
20A
Cable A
AWG 20 AWG 18 AWG 16 AWG 14 AWG 12
X
X
X
X
X
X
X
ØB
ØC
Length D Length E Length F Solder Crimp by HX3 Crimp by
hole
body conductor
Hexagone size/Dies
AF8
1,1 mm 1,65 mm
6,2 mm
6,7 mm
4,5 mm
OK
Hex. 1,9 mm/C14923
OK
1,35 mm 1,85 mm
6,2 mm
6,7 mm
4,5 mm
OK
Hex. 1,9 mm/C14923
OK
1,7 mm
6,2 mm
6 mm
6 mm
OK
OK
2 mm
6,2 mm
6 mm
6 mm
OK
OK
2,6 mm
5,5 mm
6 mm
5,3 mm
OK
OK
FEMALE STRAIGHT ON CABLE P/N 30-43xx (solder or crimp)
Cable assy instruction
IC30HP02 on page 122
Loaded Unloaded Ampere
94
4305
30-4305
5A
4308
30-4308
8A
4310
30-4310
10A
4315
30-4315
15A
4320
30-4320
20A
Cable A
AWG 20 AWG 18 AWG 16 AWG 14 AWG 12
X
X
X
X
X
X
X
ØB
ØC
Length D Length E Length F Solder Crimp by HX3 Crimp by
hole
body conductor
Hexagone size/Dies
AF8
1,1 mm 1,65 mm
6,2 mm
6,7 mm
4,5 mm
OK
Hex. 1,9 mm/C14923
1,35 mm 1,85 mm
6,2 mm
6,7 mm
4,5 mm
OK
Hex. 1,9 mm/C14923
OK
1,7 mm
6,2 mm
6 mm
6 mm
OK
OK
2 mm
6,2 mm
6 mm
6 mm
OK
OK
2,6 mm
5,5 mm
6 mm
5,3 mm
OK
OK
OK
HF : High Frequency contacts series 22
HP : High Power contacts series 22
FOR CMM 340
INSERTION
HF female contact insertion
The special contact gender
is determined
by the body and not
by the central contact
HF male contact insertion
PART NUMBERING FOR PCB HF & HP SPECIAL CONTACTS
These two digits are linked
to the connector. Do not
use them inside a CMM part
number when loaded.
All dash signs also disappear
Termination length
“12” = 1st row 3mm
“22” = 2nd row 3mm
“14” = 1st row 4.5mm
“24” = 2nd row 4.5mm
“…”
Contact type:
3 = straight
4 = right angle
5 = SMT 90°
6 = SMT straight
22 -
00 -
Coaxmatic 22™
1 = male coax
2 = female coax
3 = high power male
4 = high power female
PART NUMBERING FOR HF & HP SPECIAL CONTACTS ON-CABLE
For HF contacts only shield
Z = solder
S = crimp
For HF contacts only Inner contact
Z = solder
S = crimp
These two digits are linked
to the connector. Do not
use them inside a CMM part
number when loaded.
All dash signs also disappear
Use these 2 digits only with 1.2mm dia.
cables mounted on a HF straight contact
Crimp shield type: 01 = refer to page 92 02
= refer to page 92
Contact type:
3 = straight
“...”
22 Special contacts :
1 = male HF
2 = female HF
3 = male HP
4 = female HP
3
- Z
- 75 Use these 2 digits only with
75 Ohm cables
Contact termination:
10 = for HP 10A
12 = for HF cable 1.2mm
20 = for HF cable 2mm
95
HF : High Frequency contacts series 22
MALE STRAIGHT ON PCB P/N 22-1300-xx
Loaded
Length L
130012
3 mm
130014
4,5 mm
FEMALE STRAIGHT ON PCB P/N 22-2300-xx
Loaded
Length L
230012
3 mm
230014
4,5 mm
PCB LAYOUT 22-1300-xx & 22-2300-xx
A=
{
(nnx2)
3
}
-2
if yy and zz ≠ 0 :
B=
{(
)}
(yy)+(zz) -2 x 2,5+14,5+A
2
if yy or zz = 0 :
{(
)}
B = (yy)or(zz) -1 x 2,5+11,75+A
2
B max. = 87
96
HF : High Frequency contacts series 22
MALE 90° PCB P/N 22-1400-xx
Loaded
First row
140012
Second row
140022
First row
140014
Second row
140024
Loaded
Length L
it mounted in
same connector
140002
3 mm
it mounted in
same connector
140004
4,5 mm
Loaded
Length L
it mounted in
same connector
240002
3 mm
it mounted in
same connector
240004
4,5 mm
PCB LAYOUT 22-1400-xx
A=
{
(nnx2)
3
}
-2
if yy or zz ≠ 0 :
B=
{(
)}
(yy)+(zz) -2 x 2,5+14,5+A
2
if yy or zz = 0 :
{(
)}
B = (yy)or(zz) -1 x 2,5+11,75+A
2
B max. = 87
FEMALE 90° PCB P/N 22-2400-xx
Loaded
First row
240012
Second row
240022
First row
240014
Second row
240024
PCB LAYOUT 22-2400-xx
A=
{
(nnx2)
3
}
-2
if yy and zz ≠ 0 :
B=
{(
)}
(yy)+(zz) -2 x 2,5+14,5+A
2
if yy or zz = 0 :
{(
)}
B = (yy)or(zz) -1 x 2,5+11,75+A
2
B max. = 87
97
HF : High Frequency contacts series 22
MALE STRAIGHT TO CRIMP ON CABLE Ø 1.2 P/N 22-1312-ZS-xx
Cable assy instruction IC22HF01 on page 116
Loaded
Unloaded
ØB
ØC
1312ZS01
22-1312-ZS-01
1 mm
1,25 mm
For cable type NEXANS 50VMTX
1312ZS02
22-1312-ZS-02
0,85 mm
1,15 mm
For cable type AXON SM50
FEMALE STRAIGHT TO CRIMP ON CABLE Ø 1.2 P/N 22-2312-ZS-xx
Cable assy instruction IC22HF02 on page 117
Loaded
98
Unloaded
ØB
ØC
2312ZS01
22-2312-ZS-01
1 mm
1,25 mm
For cable type NEXANS 50VMTX
2312ZS02
22-2312-ZS-02
0,85 mm
1,15 mm
For cable type AXON SM50
HF : High Frequency contacts series 22
MALE STRAIGHT ON CABLE P/N 22-1320-ZZ
Loaded
Unloaded
1320ZZ
22-1320-ZZ
Loaded
Unloaded
2320ZZ
22-2320-ZZ
FEMALE STRAIGHT ON CABLE P/N 22-2320-ZZ
99
HP : High power contacts series 22
MALE STRAIGHT ON PCB P/N 22-3300-xx
Loaded
Length L
330012
3 mm
330014
4,5 mm
FEMALE STRAIGHT ON PCB P/N 22-4300-xx
Loaded
Length L
430012
3 mm
430014
4,5 mm
PCB LAYOUT 22-3300-xx & 22-4300-xx
A=
{
(nnx2)
3
}
-2
if yy and zz ≠ 0 :
B=
{(
)}
(yy)+(zz) -2 x 2,5+14,5+A
2
if yy or zz = 0 :
{(
)}
B = (yy)or(zz) -1 x 2,5+11,75+A
2
B max. = 87
100
HP : High power contacts series 22
MALE 90° PCB P/N 22-3400-xx
Loaded
First row
340012
Second row
340022
First row
340014
Second row
340024
Loaded
Length L
it mounted in
same connector
340002
3 mm
it mounted in
same connector
340004
4,5 mm
FEMALE 90° PCB P/N 22-4400-xx
Loaded
First row
440012
Second row
440022
First row
440014
Second row
440024
Loaded
Length L
it mounted in
same connector
440002
3 mm
it mounted in
same connector
440004
4,5 mm
PCB LAYOUT 22-3400-xx & 22-4400-xx
A=
{
(nnx2)
3
}
-2
if yy and zz ≠ 0 :
B=
{(
)}
(yy)+(zz) -2 x 2,5+14,5+A
2
if yy or zz = 0 :
{(
)}
B = (yy)or(zz) -1 x 2,5+11,75+A
2
B max. = 87
101
HP : High power contacts series 22
MALE STRAIGHT ON CABLE P/N 22-33XX (solder & crimp)
Cable assy instruction
IC22HP02 on page 121
Loaded Unloaded
Ampere
AWG 20
3305
22-3305
5A
3308
22-3308
8A
3310
22-3310
10A
Cable A
AWG 18
X
X
X
X
ØB
ØC
Length D
hole
1,1 mm
1,65 mm
6,2 mm
8,8 mm
4,5 mm
OK
Hex. 1,9 mm/C14923
1,35 mm
1,85 mm
6,2 mm
8,8 mm
4,5 mm
OK
Hex. 1,9 mm/C14923
OK
6,2 mm
8,8 mm
6 mm
OK
Hex. 1,9 mm/C14923*
OK
AWG 16
X
1,7 mm
Length E Length F
body
conductor
Solder
Crimpby HX3 Crimp by
Hexagone size/Dies
AF8
OK
* only for AWG 16
FEMALE STRAIGHT ON CABLE P/N 22-43XX (solder & crimp)
Cable assy instruction
IC22HP02 on page 121
Loaded Unloaded
Ampere
AWG 20
4305
22-4305
5A
4308
22-4308
8A
4310
22-4310
10A
* only for AWG 16
102
Cable A
AWG 18
X
X
X
X
ØB
ØC
Length D
hole
1,1 mm
1,65 mm
6,2 mm
7,7 mm
4,5 mm
OK
Hex. 1,9 mm/C14923
OK
1,35 mm
1,85 mm
6,2 mm
7,7 mm
4,5 mm
OK
Hex. 1,9 mm/C14923
OK
6,2 mm
7,7 mm
6 mm
OK
Hex. 1,9 mm/C14923*
OK
AWG 16
X
1,7 mm
Length E Length F
body
conductor
Solder
Crimpby HX3 Crimp by
Hexagone size/Dies
AF8
Tools
DANIELS MH800 TOOL AND POSITIONER P/N K1131 & K1692
Tools reference
Barrel
DANIELS MH800 only
MH800
Positioner K1692 only
C12929
Positioner K1131 only
K1131
DANIELS MH800 & K1131
C12237
DANIELS MH800 & K1692
C14925
Crimp barrel accomodation for LF contacts
Hand crimp tool reference
Positioner
Contacts type
Contacts reference
Wire size (AWG)
Crimp tool setting
DANIELS MH800
K1692
Male C
12960
22
6
DANIELS MH800
K1692
Male S
12969
24
7
DANIELS MH800
K1692
Male S
12969
26 & 28
6
DANIELS MH800
K1692
Female C
C13064-P
22
6
DANIELS MH800
K1692
Female S
C12468
24
7
DANIELS MH800
K1692
Female S
C12468
26 & 28
6
Crimp barrel accomodation for central contact HF30 series
Hand crimp tool reference
Positioner
Conductor
DANIELS MH800
K1131
Ø 0,30
Crimp tool setting
2&3
DANIELS MH800
K1131
Ø 0,50
3&4
DANIELS AF8 TOOL P/N 16459
Tools reference
Reference Nicomatic
DANIELS AF8 only
16459
DANIELS AF8 + C16460
C16462
DANIELS AF8 + C16461
C16463
Crimp barrel accomodation for crimping HP contact
Hand crimp tool reference
Positioner
HP contact serie
DANIELS AF8
C16460
30
DANIELS AF8
C16461
22
103
Tools
DANIELS HX3 TOOL P/N 13858
Tools reference
Reference Nicomatic
DANIELS HX3 only
13858
DANIELS HX3 & C13847
C12238
DANIELS HX3 & C14680
C14770
Crimp barrel accomodation for crimping coaxial contact shield
Hand crimp tool reference
Dies
Hexagonal imprint
DANIELS HX3
C13847
Hex. 1,9 / Hex. 2,4 / Hex. 2,8
DANIELS HX3
C14680
Hex. 3,25 / Hex. 4
CRIMP DIE C13847 FOR DANIELS HX3 TOOL (HF CONTACT)
CRIMP DIE C14680 FOR DANIELS HX3 TOOL (HF CONTACT)
104
Tools
LF CONTACTS INSERTION & WITHDRAWAL TOOL P/N C12935
Rep
Reference
Assembly C12935
1
13241
Body
2
13240
Plug
3
13170
Female contact extraction tip
4
13242
Male contact extraction tip
5
13171
24-28 AWG insertion tip
6
13712
22 AWG insertion tip
HF / HP SERIES 22 CONTACTS REMOVAL P/N C13997
Rep
Reference
Assembly C13997
1
13241
Body
2
13240
Plug
3
13995
Female contact extraction tip
4
13996
Male contact extraction tip
5
16139
Male & female contact insertion tool
HF / HP SERIES 30 CONTACTS REMOVAL P/N 12368
105
Tools
LATCH SEPARATION TOOL P/N C14790
Series
A max.
A min.
A max.
LF contacts
A min.
LF contacts
CMM 100
53
25
7
2
CMM 200
53
50
7
4
SCREWDRIVER P/N C14743 FOR NUT P/N 12685
Optional: dynamometric screwdriver specifically designed for low torques (includes bits & adjusting key).
MOUNTING OF C14772
BACK CAPS
Hex. 5mm Tool not delivered
106
SUCOFLEX SOLDER TOOL P/N C14777
Accessories
STRAIGHT COVER FOR CMM SERIES 220 (male & female)
P/N CMM-C2-XX (other upon request)
Material : high temp. thermoplastic (-55°C to +200°C)
Length B in mm
(distance between fixing hardware axies)
CMM
C2
CMM 220 series
CMM-C2-11
CMM-C2-15
CMM-C2-17
CMM-C2-25
CMM-C2-27
CMM-C2-31
CMM-C2-39
CMM-C2-45
CMM-C2-47
CMM-C2-49
CMM-C2-53
CMM-C2-55
Length B
11
15
17
25
27
31
39
45
47
49
53
55
Length A
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
23,7
23,7
17,2
26,7
26,7
29,7
29,7
33,7
33,7
33,7
33,7
33,7
Screw (x2)
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
inc
lud
ed
Reference
Note: F28 and M18 fixings are not included with the cover
45° COVER FOR CMM SERIES 220 (male & female)
P/N CMM-C2-XX-45 (upon request)
Material : high temp. thermoplastic (-55°C to +200°C)
Length B in mm
(distance between fixing hardware axies)
CMM
C2
4 5
CMM 220 series
45 for exit 45°
Reference Length B Length A Screw
(x2)
CMM-C2-17-45
17 mm
24,4 mm
Included
CMM220 male F28 fixing not included with cover
CMM220 female M18 fixing not included with cover
90° COVER FOR CMM SERIES 220 (male & female)
P/N CMM-C2-XX-90 (upon request)
Material : high temp. thermoplastic (-55°C to +200°C)
Length B in mm
(distance between fixing hardware axies)
CMM
C2
9 0
CMM 220 series
90 for exit 90°
Reference Length B Length A Screw
(x2)
CMM-C2-53-90
53 mm
26 mm
Included
CMM220 male F28 fixing not included with cover
CMM220 female M18 fixing not included with cover
Note: Aluminum covers are available upon request. Contact us.
107
Accessories
COVERS STRAIGHT FOR CMM SERIES 320 & 340 (male & female)
P/N CMM-C3-XX.X
Material : high temp. thermoplastic (-55°C to +200°C)
Length B in mm
(distance between fixing hardware axies)
CMM
C3
.
CMM series 320 & 340
Reference Length B Length A Screw
(x2)
CMM-C3-27.5
CMM-C3-45.0
27,5 mm
45,0 mm
34,4 mm
34,4 mm
Included
For CMM320/340 male & female
M45 or F57 fixing not included with cover
Other upon request
SHIELDING FOR CMM SERIES 220 (male straight on PCB)
P/N 12997-XX (upon request)
XX = distance between fixing axis B
SHIELDING FOR CMM SERIES 220 (male 90° on PCB)
P/N 12998-XX (upon request)
XX = distance between fixing axis B
SHIELDING FOR CMM SERIES 220 (female on cable)
P/N C13024-XX (upon request)
XX = distance between fixing axis B
108
Accessories
BACKPOTTING SHAPE FOR CMM SERIES 200 (female)
P/N 14501-XX
Material : thermoplastic 100°C max.
Reference
Length B
14501-07
14501-09
14501-11
14501-13
14501-15
14501-17
14501-19
14501-21
14501-23
14501-25
14501-27
14501-29
14501-31
14501-33
14501-35
14501-37
14501-39
14501-41
14501-43
14501-45
14501-47
14501-49
14501-51
14501-53
min. 7 mm
9 mm
11 mm
13 mm
15 mm
17 mm
19 mm
21 mm
23 mm
25 mm
27 mm
29 mm
31 mm
33 mm
35 mm
37 mm
39 mm
41 mm
43 mm
45 mm
47 mm
49 mm
51 mm
max. 53 mm
BACKPOTTING SHAPE FOR CMM SERIES 220 (male & female)
P/N 14143-XX
Material : thermoplastic 100°C max.
Reference
Length B
14143-09
14143-11
14143-13
14143-15
14143-17
14143-19
14143-21
14143-23
14143-25
14143-27
14143-29
14143-31
14143-33
14143-35
14143-37
14143-39
14143-41
14143-43
14143-45
14143-47
14143-49
14143-51
14143-53
14143-55
14143-57
14143-59
14143-61
14143-63
14143-65
min. 9 mm
11 mm
13 mm
15 mm
17 mm
19 mm
21 mm
23 mm
25 mm
27 mm
29 mm
31 mm
33 mm
35 mm
37 mm
39 mm
41 mm
43 mm
45 mm
47 mm
49 mm
51 mm
53 mm
55 mm
57 mm
59 mm
61 mm
63 mm
max. 65 mm
Note: Special housing with integrated
backpotting available upon request.
109
Accessories
CONTACTS ALIGNMENT PLATE P/N 14601-120
Material : high temperature thermoplastic (-55°C to +200°C)
Divisible
Note : systematically delivered and mounted
on the CMM 320 series "right angle" (V and VL types)
SILICON INTERFACIAL SEAL (for male connector except S-C types)
LF 220 series P/N 14599-54 = 52 mm max.
LF 320 series P/N 14980-120 = 78 mm max.
Special contacts 220 series P/N 16053-15 = 60,2 mm max.
Mix-layout on request
110
Accessories
COAX CABLE CRIMP TERMINATION
(straight for cables Ø 2 and Ø 2,7)
Cable A
ØB
ØC
Hex. E
C14759
C14760
Ø2
1 mm
2,2 mm
2,4 on flat
Ø 2,7
1,7 mm
2,8 mm
2,8 on flat
COAX CABLE CRIMP TERMINATION
(90° for cables Ø 2 and Ø 2,7)
Cable A
ØB
ØC
Length D
Hex. E
C14761
C14762
Ø2
1 mm
2,2 mm
3,4 mm
2,4 on flat
Ø 2,7
1,7 mm
2,8 mm
3,8 mm
2,8 on flat
111
Accessories
COAX CABLE CRIMP TERMINATION
P/N C13313 for RG 178 and P/N C14765 for RG 178 DS
ØC
Hex. E
C13313
C14765
RG178
2,2 mm
2,4 mm
RG178DS
2,8 mm
2,8 mm
COAX CABLE CRIMP TERMINATION
P/N C12780 for cables RG 316
CRIMP GAUGE REDUCER
for awg 30-32 for LF contacts P/N 12922 & 14142
112
Gender
Contact “C”
Reducer
Tool
Positioner
Position 1st crimp
Male
Female
12960
C13064-P
12922
MH800
K1692
Contact + reducer + cable
position “4”
Male
Female
12960
C13064-P
14142
MH800
K1692
Reducer + cable
position “8”
Position 2nd crimp
(Reducer & cable) + contact
position “4”
Cable instructions (ICLF01)
113
Cable instructions
HF
Supplier
P/N
Ø Cable
Series
CONNECTION
CONTACTS
Gender
Ref. contact
Male
(30-1312-ZS-02 *)
MODE
Central contact
Shield
Impedance
Solder
Crimped
Hex. 1,9 mm
50 Ohm
Solder
Crimped
Hex. 1,9 mm
75 Ohm
Crimped
Hex. 2,8 mm
50 Ohm
Crimped
Hex. 2,8 mm
50 Ohm
Crimped
Hex. 2,8 mm
75 Ohm
Crimped
Hex. 3,25 mm
50 Ohm
Crimped
Hex. 3,25 mm
75 Ohm
30-1312-ZS-01
30-1412-ZS
HF30
50VMTX
(SM 50 *)
30-2312-ZS-01
Female
1,2 mm
30-2412-ZS
Male
HF22
Female
Nexans
(Axon *)
75VMTX
(SM 75 *)
Female
1,2 mm
SPECIAL
Female
Male
2,3 mm
HF30
Female
Male
P 812817
2,3 mm
HF30
Female
Axon
PTFE
Cellular
Male
P 804298 B
2,4 mm
HF30
Female
Male
P0530912
2,7 mm
HF30
Female
Male
P530268
3 mm
(30-2312-ZS-75-02 *)
30-2412-ZS-75
HF22
P500955
(30-1312-ZS-75-02 *)
30-2312-ZS-75-01
Male
Axon
RG 179 DT
22-2312-ZS-01
(22-2312-ZS-02 *)
30-1412-ZS-75
HF30
Axon
RG 316 DT
22-1312-ZS-01
(22-1312-ZS-02 *)
30-1312-ZS-75-01
Male
Axon
RG 178 DT
(30-2312-ZS-02 *)
HF30
Female
22-1312-ZS-75-01
(22-1312-ZS-75-02 *)
22-2312-ZS-75-01
(22-2312-ZS-75-02 *)
30-1320-DS
On choice
30-1420-DS
Solder
30-2320-DS
On choice
30-2420-DS
Solder
30-1324-DS
On choice
30-1424-DS
Solder
30-2324-DS
On choice
30-2424-DS
Solder
30-1324-DS-75
On choice
30-1424-DS-75
Solder
30-2324-DS-75
On choice
30-2424-DS-75
Solder
30-1326-DS
On choice
30-1426-DS
Solder
30-2326-DS
On choice
30-2426-DS
Solder
30-1326-DS-75
On choice
30-1426-DS-75
Solder
30-2326-DS-75
On choice
30-2426-DS-75
Solder
DT = DS (Double Shield)
ØB
114
ØC
P/N terminal -01 for 50VMTX cable type
1 mm 1,25 mm
P/N terminal -02 for SM 50 cable type
0,85 mm 1,15 mm
Sleeve
Cable instructions
NORMES
MIL-C-17
HF
NF C93-550
Ø Cable
Series
CONTACTS
Gender
Ref. contact
Central contact
30-1320-SS
Crimped
Male
30-1320-ZS
30-1420-ZS
HF30
RG 178
KX 21 A
2 mm
30-2320-SS
Female
30-2320-ZS
Male
Female
22-1320-ZZ
22-2320-ZZ
Male
30-1326-ZS
30-2420-ZS
HF22
KX 22 A
2,7 mm
30-1426-ZS
HF30
30-2326-SS
Female
30-2326-ZS
30-2426-ZS
COAX
CABLE
30-1326-SS
RG 316
30-1326-SS
Male
RG 174
KX 3 B
2,7 mm
30-1326-ZS
30-1426-ZS
HF30
30-2326-SS
Female
30-2326-ZS
30-2426-ZS
30-1326-SS-75
Male
RG 179
2,7 mm
30-1326-ZS-75
30-1426-ZS-75
HF30
30-2326-SS-75
Female
30-2326-ZS-75
30-2426-ZS-75
HF
Supplier
P/N
Ø Cable
Series
CONTACTS
Gender
Male
SEMI-RIGID
UT47
1,2 mm
HF30
Female
(Axon *)
UT85
(QFX 86
SPCW *)
Male
2,2 mm
CONNECTION
HF30
Female
Ref. contact HF
Solder
Crimped
MODE
Shield
Crimped
Hex. 2,4 mm
Impedance
50 Ohm
Solder
Solder
Crimped
Solder
Crimped
Crimped
Hex. 2,8 mm
50 Ohm
Crimped
Hex. 2,8 mm
50 Ohm
Crimped
Hex. 2,8 mm
75 Ohm
Solder
Crimped
Solder
Crimped
Solder
Crimped
Solder
Crimped
Solder
CONNECTION
MODE
Central contact
Shield
Impedance
Solder
Solder
50 Ohm
Solder
Solder
50 Ohm
30-1347-ZZ
30-1447-ZZ
30-2347-ZZ
30-2447-ZZ
30-1385-ZZ
30-1485-ZZ
30-2385-ZZ
30-2485-ZZ
115
Cable instructions (IC22HF01)
116
Cable instructions (IC22HF02)
117
Cable instructions (IC30HF01)
1 - Thread the sleeve until stop onto the cable
- Place the shield on the sleeve
2 - Thread the insulator
- Solder the inner contact on the conductor
3 - Thread to the body.
4 - CRIMP
- Tool :
- Die :
- Hexagone :
- Position :
118
DANIELS HX3
C13847
1,9 mm / flat
9,95 mm
ØB
ØC
P/N terminal -01
1
1,25
P/N terminal -02
0,85
1,15
Sleeve
Cable instructions (IC30HF02)
Central crimp
DANIELS MH800
Cable
ØA
Body
ØB
Sleeve
ØC
Contact
ØD
30-x320-SS
2 mm
1 mm
2,2 mm
0,5 mm
30-x320-DS
2,3 mm
1 mm
2,8 mm
0,5 mm
30-x324-SS
2,4 mm
1,5 mm
2,8 mm
0,6 mm
30-x326-SS
2,7 mm
1,7 mm
2,8 mm
0,6 mm
30-x326-DS
3 mm
1,7 mm
3,25 mm
0,6 mm
Hexagonal imprint E sleeve crimp DANIELS HX3 tool
Positioner K1131
Conductor Ø 0,3 Conductor Ø 0,5
Die C13847
Hex.1,9
Hex.2,4
Die C14680
Hex.2,8
Hex.3,25
Hex.4
x
x
Position 2 / 3
Position 3 / 4
x
x
x
1 - Mount the inner contact on the conductor and solder
or crimp.
(crimping with DANIELS MH800 positioner K1131)
2 - Thread the sleeve onto the cable and bent the shield at 90°.
3 - Push until stop inside the body.
4 - Thread the sleeve until stop on the body
so as to bent the shield.
5 - Crimp the sleeve
119
Cable instructions (IC30HF03)
1 - Thread the sleeve on
cable and bent the
shield at 90°
2 - Place the inner contact
until stop in the body.
Insert the cable and
solder the conductor
onto the inner contact
3 - Thread the sleeve until
stop on the body so as
to bent the shield
Hexagonal imprint E sleeve crimp DANIELS HX3 tool
30-x412-ZS
Cable
ØA
Body
ØB
Sleeve
ØC
Contact
1,2 mm
0,7 mm
1,3 mm
solder
Hex.2,4
Die C14680
Hex.2,8
Hex.3,25
x
30-x420-ZS
2 mm
1 mm
2,2 mm
solder
30-x420-DS
2,3 mm
1 mm
2,8 mm
solder
x
30-x424-ZS
2,4 mm
1,5 mm
2,8 mm
solder
x
30-x426-ZS
2,7 mm
1,7 mm
2,8 mm
solder
x
30-x426-DS
3 mm
1,7 mm
3,25 mm
solder
4 - Crimp the sleeve with DANIELS HX3 tool and
mount the back cap with tool P/N C14772
120
Die C13847
Hex.1,9
x
x
Hex.4
Cable instructions (IC22HP02)
121
Cable instructions (IC30HP02)
122
Index
General information
CMM presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .p 2
CMM specifications & dimension tables . . . . . . . . . . . . . . . .p 3-4-5
Contacts information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .p 7-11
Male and Female housings marking . . . . . . . . . . . . .p 12-13
Standard part numbering & product families . . . . . .p 14-15
Custom products & innovations . . . . . . . . . . . . . . . .p 125
CMM 100/200 Series
p 17-25
Contact arrangements & configuration . . . . . . . . . . . . . . . . .p 18-19
Male connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .p 20-22
Female connectors . . . . . . . . . . . . . . . . . . . . . . . . . .p 23-25
Retention latches information . . . . . . . . . . . . . . . . .p 22
CMM 220 Series
CMM LF introduction page . . . . . . . . . . . . . . . . . . . . . . . . . .p
Contact arrangements & configuration . . . . . . . . . . . . . . . . .p
Male connectors with LF contacts . . . . . . . . . . . . . . . . . . . . .p
Female connectors with LF contacts . . . . . . . . . . . . . . . . . . .p
Mixed-Layout introduction page . . . . . . . . . . . . . . . . . . . . . .p
p 27-46
27
28
29-31
32-34
35
Male connectors with Mixed-Layout . . . . . . . . . . . .p
Female connectors with Mixed-Layout . . . . . . . . . .p
Shifted polarization key position . . . . . . . . . . . . . . . .p
Fixing hardware information . . . . . . . . . . . . . . . . . . .p
CMM 320 Series
CMM LF introduction page . . . . . . . . . . . . . . . . . . . . . . . . . .p
Contact arrangements & configuration . . . . . . . . . . . . . . . . .p
Male connectors with LF contacts . . . . . . . . . . . . . . . . . . . . .p
Female connectors with LF contacts . . . . . . . . . . . . . . . . . . .p
Mixed-Layout introduction page . . . . . . . . . . . . . . . . . . . . . .p
36-38
39-41
42
43-46
p 47-59
47
48
49-50
51-52
53
Male connectors with Mixed-Layout . . . . . . . . . . . .p 54-56
Female connectors with Mixed-Layout . . . . . . . . . .p 57-59
Fixing hardware information . . . . . . . . . . . . . . . . . . .p 69-74
CMM 340 Series
CMM 340 Mixed-Layout introduction page . . . . . . . . . . . . . .p 60-61
Contact arrangements & configuration . . . . . . . . . . . . . . . . .p 62
Male connectors with Mixed-Layout . . . . . . . . . . . . . . . . . . .p 63-65
p 60-74
Female connectors with Mixed-Layout . . . . . . . . . . .p 66-68
Fixing hardware information . . . . . . . . . . . . . . . . . . .p 69-74
High frequency and high power contacts
Insertion & part numbering information
for HF & HP contacts series 30 . . . . . . . . . . . . . . . . . . .p 75
HF contacts series 30 . . . . . . . . . . . . . . . . . . . . . . . . .p 76-86
30-1300-xx (Male straight on PCB) . . . . . . . . . . . . . . . . . . . .p 76
30-2300-xx (Female straight on PCB) . . . . . . . . . . . . . . . . . .p 76
30-1400-xx (Male 90° PCB) . . . . . . . . . . . . . . . . . . . . . . . . . .p 77
30-2400-xx (Female 90° PCB) . . . . . . . . . . . . . . . . . . . . . . . .p 77
30-1500-CMM (Male 90° SMT without LF) . . . . . . . . . . . . .p 78
30-1500-12 (Male 90° SMT for CMM220) . . . . . . . . . . . . . .p 79
30-1500-12 (Male 90° SMT for CMM320) . . . . . . . . . . . . . .p 80
30-1600 (Male straight SMT for CMM220) . . . . . . . . . . . . . .p 81
30-2600 (Female straight SMT for CMM220) . . . . . . . . . . . .p 81
30-1312-ZS (Male straight crimp on cable) . . . . . . . . . . . . . .p 82
30-2312-ZS (Female straight crimp on cable) . . . . . . . . . . . .p 82
30-13xx-SS / ZS (Male straight crimp on cable) . . . . . . . . . .p 83
30-23xx-SS / ZS (Female straight crimp on cable) . . . . . . . .p 83
30-14xx-ZS (Male 90° crimp on cable) . . . . . . . . . . . . . . . . .p 84
30-24xx-ZS (Female 90° crimp on cable) . . . . . . . . . . . . . . .p 84
30-13xx-ZZ (Male straight on semi-rigid cable . . . . . . . . . .p 85
30-23xx-ZZ (Female straight on semi-rigid cable) . . . . . . . .p 85
30-14xx-ZZ (Male 90° on semi-rigid cable) . . . . . . . . . . . . .p 86
30-24xx-ZZ (Female 90° on semi-rigid cable) . . . . . . . . . . .p 86
HP contacts series 30 . . . . . . . . . . . . . . . . . . . . . . . . .p 87-93
30-3300-xx (Male straight on PCB) . . . . . . . . . . . . . . . . . . . .p 87
30-4300-xx (Female straight on PCB) . . . . . . . . . . . . . . . . . .p 87
30-3400-xx (Male 90°) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .p 88
30-4400-xx (Female 90°) . . . . . . . . . . . . . . . . . . . . . . . . . . . .p 88
Tools and accessories
Cable instructions & assembly
Index
Notes
p 75-102
30-3500 (Male 90° SMT) . . . . . . . . . . . . . . . . . . . . . .p 89
30-4500 (Female 90° SMT) . . . . . . . . . . . . . . . . . . . .p 89
30-3600 (Male straight SMT) . . . . . . . . . . . . . . . . . .p 90
30-4600 (Female straight SMT) . . . . . . . . . . . . . . . . .p 90
30-3500-CMM (Male 90° SMT Card Edge) . . . . . . .p 91
30-3500-12 (Male 90° SMT Card Edge CMM220) . .p 92
30-3500-12 (Male 90° SMT Card Edge CMM320) . .p 93
30-33xx (Male straight on cable) . . . . . . . . . . . . . . .p 94
30-43xx (Female straight on cable) . . . . . . . . . . . . .p 94
Insertion & part numbering information
for HF & HP contacts series 22 . . . . . . . . . . .p 95
HF contacts series 22 . . . . . . . . . . . . . . . . . . .p 96-99
22-1300-xx (Male straight on PCB) . . . . . . . . . . . . .p 96
22-2300-xx (Female straight on PCB) . . . . . . . . . . .p 96
22-1400-xx (Male 90° PCB) . . . . . . . . . . . . . . . . . . .p 97
22-2400-xx (Female 90° PCB) . . . . . . . . . . . . . . . . .p 97
22-1312-ZS-xx (Male straight to crimp on cable) . .p 98
22-2312-ZS-xx (Female straight to crimp on cable) p 98
22-1320-ZZ (Male straight on cable) . . . . . . . . . . . .p 99
22-2320-ZZ (Female straight on cable) . . . . . . . . . .p 99
HP contacts series 22 . . . . . . . . . . . . . . . . . . .p 100-102
22-3300-xx (Male straight on PCB) . . . . . . . . . . . . .p 100
22-4300-xx (Female straight on PCB) . . . . . . . . . . .p 100
22-3400-xx (Male 90° on PCB) . . . . . . . . . . . . . . . .p 101
22-4400-xx (Female 90° on PCB) . . . . . . . . . . . . . . .p 101
22-33xx (Male straight on cable) . . . . . . . . . . . . . . .p 102
22-43xx (Female straight on cable) . . . . . . . . . . . . .p 102
p 103-112
p 113-122
p 123
p 124
123
Notes
124
Couv_rabat_2011.qxd:Mise en page 1 18/05/11 11:37 Page2
Dimension Tables
CMM 100/200 SERIES
CMM Specifications (with LF contacts)
Manufacturer and designer of
innovative interconnect solutions
MATERIALS
in male & female styles for LF contacts
INSULATOR: Special PPS (Polyphenylene Sulfide Fiberglass filled thermoplastic) UL 94-V0
CMM SERIES
100 & 200
Male
LF contacts number series 100 2
3
4
LF contacts number series 200 4
6
8
Length in mm
A
2
4
6
Length in mm (Strap)
B
6,7 8,7 10,7
Length in mm
C 7,4 9,4 11,4
Length C with Latches fitted
7,8 9,8 11,8
5
10
8
12,7
13,4
13,8
6
12
10
14,7
15,4
15,8
7
14
12
16,7
17,4
17,8
8
16
14
18,7
19,4
19,8
9
18
16
20,7
21,4
21,8
10
20
18
22,7
23,4
23,8
11
22
20
24,7
25,4
25,8
12
24
22
26,7
27,4
27,8
13
26
24
28,7
29,4
29,8
14
28
26
30,7
31,4
31,8
15
30
28
32,7
33,4
33,8
16
32
30
34,7
35,4
35,8
17
34
32
36,7
37,4
37,8
18
36
34
38,7
39,4
39,8
19
38
36
40,7
41,4
41,8
20
40
38
42,7
43,4
43,8
21
42
40
44,7
45,4
45,8
22
44
42
46,7
47,4
47,8
23
46
44
48,7
49,4
49,8
24
48
46
50,7
51,4
51,8
25
50
48
52,7
53,4
53,8
• Radiation resistance
• No humidity absorption
• Oxygen free
Note : PPS characteristics are recognized for space applications
CMM SERIES
100 & 200
Female
LF contacts number series 100
LF contacts number series 200
Length in mm
A
Length in mm
B
D
E
F
G
LF CONTACTS REFERENCE MARK
NUMBER FOR CMM SERIES 200
Male & Female
CMM 220 SERIES
LF contacts number
Distance between A
axis
B
CMM
SERIES 220 Length in mm
Male &
LF contacts
Female
reference mark
number
C
D
E
F
G
2
4
2
7
3
6
4
9
4
8
6
11
5
10
8
13
6
12
10
15
7
14
12
17
8
16
14
19
9
18
16
21
10
20
18
23
11
22
20
25
12
24
22
27
13
26
24
29
14
28
26
31
15
30
28
33
16
32
30
35
17
34
32
37
18
36
34
39
19
38
36
41
20
40
38
43
21
42
40
45
22
44
42
47
23
46
44
49
24
48
46
51
25
50
48
53
1
2
3
4
1
3
4
6
1
4
5
8
1
5
6
10
1
6
7
12
1
7
8
14
1
8
9
16
1
9
10
18
1
10
11
20
1
11
12
22
1
12
13
24
1
13
14
26
1
14
15
28
1
15
16
30
1
16
17
32
1
17
18
34
1
18
19
36
1
19
20
38
1
20
21
40
1
21
22
42
1
22
23
44
1
23
24
46
1
24
25
48
1
25
26
50
Special contacts number
CMM 220
Male & Female Distance between A
axis
Special
B
contacts only
Length in mm
C
LF contacts number 6
Distance between A 2
axis
B 11
Length in mm
C 17
CMM
D 1
SERIES 320
E 2
Male &
LF contacts
F 3
Female
reference mark
G 4
number
H 5
J 6
9
4
13
19
1
3
4
6
7
9
12
10
17
22
1
6
7
12
12
6
15
21
1
4
5
8
9
12
14
12
19
24
1
7
8
14
16
14
21
26
1
8
9
16
18
16
23
28
1
9
10
18
20
18
25
30
1
10
11
20
22
20
27
32
1
11
12
22
24
22
29
34
1
12
13
24
26
24
31
36
1
13
14
26
28
26
33
38
1
14
15
28
30
28
35
40
1
15
16
30
32
30
37
42
1
16
17
32
34
32
39
44
1
17
18
34
36
34
41
46
1
18
19
36
38
36
43
48
1
19
20
38
40
38
45
50
1
20
21
40
42
40
47
52
1
21
22
42
44
42
49
54
1
22
23
44
46
44
51
56
1
23
24
46
48
46
53
58
1
24
25
48
3
8
17
22
4
12
21
26
5
16
25
30
6
20
29
34
7
24
33
38
8
28
37
42
9
32
41
46
10
36
45
50
11
40
49
54
18
10
19
25
1
6
7
12
13
18
21
12
21
27
1
7
8
14
15
21
24
14
23
29
1
8
9
16
17
24
27
16
25
31
1
9
10
18
19
27
30
18
27
33
1
10
11
20
21
30
33
20
29
35
1
11
12
22
23
33
36
22
31
37
1
12
13
24
25
36
39
24
33
39
1
13
14
26
27
39
42
26
35
41
1
14
15
28
29
42
45
28
37
43
1
15
16
30
31
45
48
30
39
45
1
16
17
32
33
48
51
32
41
47
1
17
18
34
35
51
54
34
43
49
1
18
19
36
37
54
57
36
45
51
1
19
20
38
39
57
60
38
47
53
1
20
21
40
41
60
63
40
49
55
1
21
22
42
43
63
66
42
51
57
1
22
23
44
45
66
69
44
53
59
1
23
24
46
47
69
72
46
55
61
1
24
25
48
49
72
75
48
57
63
1
25
26
50
51
75
78
50
59
65
1
26
27
52
53
78
81
52
61
67
1
27
28
54
55
81
84
54
63
69
1
28
29
56
57
84
87
56
65
71
1
29
30
58
59
87
50
48
55
60
1
25
26
50
12
44
53
58
90
58
67
73
1
30
31
60
61
90
93
60
69
75
1
31
32
62
63
93
52
50
57
62
1
26
27
52
54
52
59
64
1
27
28
54
13
48
57
62
96
62
71
77
1
32
33
64
65
96
Female:
Body : copper alloy / Ni + Au 0,2 µ
Socket : beryllium copper / Ni + Au > 1,25µ
56
54
61
66
1
28
29
56
58
56
63
68
1
29
30
58
60
58
65
70
1
30
31
60
14
52
61
66
99
64
73
79
1
33
34
66
67
99
102
66
75
81
1
34
35
68
69
102
105
68
77
83
1
35
36
70
71
105
108
70
79
85
1
36
37
72
73
108
111
72
81
87
1
37
38
74
75
111
114
74
83
89
1
38
39
76
77
114
117
76
85
91
1
39
40
78
79
117
OMM SERIES MICRO-CIRCULAR CONNECTORS
High density of contacts in smallest circular connector shape
Space saving feature
Security of connection
Light weight
Lockable captive fixing hardware
ELECTRICAL
• All contacts
3 A max. @ 25°C
2.2 A max. @ 85°C
• Working voltage (sea level)
Tested at 800 V DC
• Proof voltage
Tested at 1 200 V DC
• Contact resistance (initially)
max. 10 mΩ
• Insulation resistance
1 000 MΩ min.
MECHANICAL
15
56
65
70
• Mechanical operations
Up to 2500 cycles
• Contact insertion and withdrawal force
2 N max. / 0.2 N min. per contact
• Contact retention in insulator
10 N min.
• Contact replacement in insulator
1-3 cycles (Crimp contacts only)
ENVIRONMENTAL
120
78
87
93
1
40
41
80
81
120
• Temperature cycling
From - 60°C to + 260°C
Reflow solder process compatible (+260°C)
• Vibration severity
0.75 mm, 10 g RMS 6 hours long random with superimposed sinusoid. No
intermittencies measured when using an H.S.L.I (High Speed Logic Interrupt)
detector with a trip threshold of 2 ns.
MIL-DTL-55302F Test Condition III [147.1 m/s2 (15 gn) peak]
• Shock severity
100 g for 6 ms
• Solvent resistance
CMM 340 SERIES
CMM 340
Male & Female
Special
contacts only
3
2mm pitch high density robust metal shielded micro connector
Self cabling connector
Simple and easy to design-in
New alternative under MIL-DTL-83513G or MIL-DTL-55302F test routine
Very flexible custom design (fixing hardware, contacts…)
Female:
Body : copper alloy / Ni + Au > 0,2 µ
Socket : beryllium copper / Ni + Au > 1,25µ
• Latch : Beryllium copper/plated nickel
(CMM 100/200 series only)
in male & female styles for LF contacts
15
8
17
23
1
5
6
10
11
15
MICRO-D MIX™ DMM SERIES MICRO-CONNECTORS
FIXING HARDWARE:
• Jackscrew: Stainless steel.
in male & female styles for HF/HP contacts
2
4
13
18
CMM 320 SERIES
CRIMP LF CONTACTS :
Male:
Body : copper alloy / Ni + Au > 1µ
in male & female styles for LF contacts
4 6 8 10
2 4 6 8
9 11 13 15
14 16 18 20
1 1 1 1
2 3 4 5
3 4 5 6
4 6 8 10
CMM 220 SERIES
P.C. LF CONTACTS :
Male:
Tail : copper alloy / Ni + Au flash 0,1µ
Contact area : copper alloy / Ni + Au > 1µ
MICROFLEX HARNESS SOLUTION
Low weight: save up to -30% vs. bulky cable
Smaller space-factor
2 in 1 technology with CMM & CRIMPFLEX
Avionic & aerospace MIL comply
High quality of crimp (gaz tie)
High productivity: 2 to 30 contacts in 1 crimp
4D-FLOATING CONNECTORS
4D tolerance absorption: 4D = 3 axial movements + 1 rotation
High efficiency “Bone design” (round shape and 4 spring-lips contact)
Complies with MIL-DTL-55302F
Auto alignment feature
Adaptable to customer requests
CUSTOM PRODUCTS
You can rely on our R&D department know-how and long experience.
Our permanent innovation was recognized and labelized as "highly Innovative" by the European Union
Our in-house production and assembly capacity offers you the possibility to create customized products :
stamping and moulding, micro-screw machining, laser cut, CNC, specific machinery development, clean
room, measure and test lab.
Fully integrated industrial company, Nicomatic can reduce your risks, can secure your development and
achieve the solution that will make the difference on the market.
in male & female styles for HF/HP contacts
Special contacts number 4 6 8
Distance between A 2,5 5 7,5
axis
B 12,5 15 17,5
Length in mm
C 18,5 21 23,5
10
10
20
26
12
12,5
22,5
28,5
14
15
25
31
16
17,5
27,5
33,5
18
20
30
36
20
22,5
32,5
38,5
22
25
35
41
24
27,5
37,5
43,5
26
30
40
46
28
32,5
42,5
48,5
30
35
45
51
32
37,5
47,5
53,5
34
40
50
56
36
42,5
52,5
58,5
38
45
55
61
40
47,5
57,5
63,5
42
50
60
66
44
52,5
62,5
68,5
46
55
65
71
48
57,5
67,5
73,5
50
60
70
76
52
62,5
72,5
78,5
54
65
75
81
56
67,5
77,5
83,5
58
70
80
86
60
72,5
82,5
88,5
62
75
85
91
Note :
The CMM micro-connectors are designed to meet or exceed
the relevant electrical and environmental performances
described in MIL-DTL-55302F & BS-9525-F0033 standards.
64
77,5
87,5
93,5
4
Date of issue : May 2011
Catalogue reference : C.CMM.1000/GB
NICOMATIC maintains a policy of ongoing development and
improvement. It therefore reserves the right to change design,
dimensions and specifications without notice. All information stated
inside this catalogue is not contractual and subject to change
(eg. standard connector configurations).
Copyright 2011 by NICOMATIC (All Rights Reserved).
125
HEADQUARTER
SUBSIDIARIES
FRANCE
T:+33 (0)4 50 36 13 85
france@nicomatic.com
UNITED STATES
T:+1 21 54 44 95 80
usa@nicomatic.com
SOUTH KOREA
T: +82 (0)2 553 6822
korea@nicomatic.com
CHINA
T:+86 (0)22 23 85 88 36
china@nicomatic.com
JAPAN
T: +81 (0)80 2138 0909
japan@nicomatic.com
INDIA
T: +91 80 421 315 74
india@nicomatic.com
SINGAPORE
T: +65 62 62 12 80
singapore@nicomatic.com
UNITED KINGDOM
T: +44 (0) 11 83 80 10 33
uk@nicomatic.com
CANADA
T: +41 (0) 438 885 3395
canada@nicomatic.com
GERMANY
T: +49 (0)33 203 878 801
germany@nicomatic.com
TAIWAN
T: +886 (0)2 2311 2667
taiwan@nicomatic.com
MEMBER OF
Gifas - Eden
Aerospace cluster
TURKEY
T: +90 (0) 312 504 37 29
turkey@nicomatic.com
WEBSITE
nicomatic.com
CAREER
COME & JOIN US
◆ Improving technology
◆ Diversity & gender equality
◆ We promote initiative & responsibility
READY TO JOIN OUR TEAM?
recruitment@nicomatic.com