60PC4FS

Switchcraft Page 1 of 2 Previous Page | Return to Index | Next Page DIN RECEPTACLES RIGHT-ANGLE SHIELDED RECEPTACLE for Printed Circuit Board Mounting click here to download a schematic drawing (you will need to have Adobe Acrobat installed on your system to do this) Type 60PC4FS-typical Similar to 57PC5F - Typical, except flange surrounding face of insert is metal to provide through-grounding between plug and receptacle and to potential panel/chassis for common grounding. ORDERING INFORMATION Part Number Description Contact Arrangement ¤57PC3FS 3 contacts at 180° B 57PC5FS 5 contacts at 180° F ¤60PC4FS 4 contacts at 210° D 61PC5FS 5 contacts at 240° E 05/02/2006 Switchcraft Page 2 of 2 61PC6FS 6 contacts at 240° G 62PC7FS 7 contacts at 270° H 62PC8FS 8 contacts at 270° N SPECIFYING NOTE: Another series of receptacles with a trimmed metal flange .052 inch (1.32 mm) below housing top is available. Replace suffix "S" with "T" in part numbers above to specify these receptacles or contact Switchcraft. Mounting: #2 or #3 self-tapping screw. ¤ Available on special order only; contact Switchcraft for price and delivery. Previous Page | Return to Index | Next Page To search a category please click on the corresponding icon: | Connectors | Jacks and Plugs | | Patch Panels, Patch Kits & Jackfields | Cable Assemblies and Patch Cords | Switches | All products shown are covered by Switchcraft's limited lifetime warranty. | Switchcraft home | About Us | Products | What's New | Search | Contact Us http://www.switchcraft.com/products/connectors-42.html 05/02/2006