60
SЕRIES
General purpose relays
6 - 10 A
Shipyards
Hoists and cranes
Road / tunnel
lighting
Burners, boilers
and furnaces
Wood-processing
machines
Panels for electrical
distribution
Control panels
Control systems
FINDER reserves the right to alter characteristics at any time without notice. FINDER assumes no liability for damage to persons or property, caused as a result of the incorrect use or application of its products.
60 SERIES
General purpose relays 6 - 10 A
60
SERIES
60.12
Plug-in mount
10 A General purpose relay
60.13
Type 60.12
A
- 2 pole, 10 A
Type 60.13
- 3 pole, 10 A
• 2 & 3 pole changeover contacts
• Cadmium Free contacts (preferred version)
• AC coils & DC coils
• UL Listing (certain relay/socket combinations)
• Contact material options
• Lockable test button with mechanical flag
• 2 pole, 10 A
• 8 pin plug-in
• 3 pole, 10 A
• 11 pin plug-in
indicator (preferred version)
• 90 series sockets
• Coil EMC suppression
• Timer accessories 86 series
• European Patent
For UL ratings see:
“General technical information” page V
For outline drawing see page 8
Contact specification
Contact configuration
Rated current/Maximum peak current
Rated voltage/
Maximum switching voltage
A
V AC
2 CO (DPDT)
3 CO (3PDT)
10/20
10/20
250/400
250/400
Rated load AC1
VA
2500
2500
Rated load AC15 (230 V AC)
VA
500
500
Single phase motor rating (230 V AC)
kW
0.37
0.37
Breaking capacity DC1: 30/110/220 V
A
10/0.4/0.15
10/0.4/0.15
mW (V/mA)
500 (10/5)
500 (10/5)
AgNi
AgNi
Minimum switching load
Standard contact material
Coil specification
Nominal voltage (UN)
V AC (50/60 Hz)
6 - 12 - 24 - 48 - 60 - 110 - 120 - 230 - 240 - 400
V DC
Rated power AC/DC
Operating range
VA (50 Hz)/W
6 - 12 - 24 - 48 - 60 - 110 -125 - 220
2.2/1.3
2.2/1.3
AC
(0.8…1.1)UN
(0.8…1.1)UN
DC
(0.8…1.1)UN
(0.8…1.1)UN
Holding voltage
AC/DC
0.8 UN / 0.5 UN
0.8 UN / 0.5 UN
Must drop-out voltage
AC/DC
0.2 UN / 0.1 UN
0.2 UN / 0.1 UN
Mechanical life AC/DC
cycles
20 · 106 / 50 · 106
20 · 106 / 50 · 106
Electrical life at rated load AC1
cycles
200 · 103
200 · 103
ms
11/4
11/4
kV
4
3.6
1000
1000
–40…+70
–40…+70
RT I
RT I
Technical data
I-2018，www.findernet.com
Operate/release time
Insulation between coil
and contacts (1.2/50 μs)
Dielectric strength
between open contacts
Ambient temperature range
Environmental protection
V AC
°C
Approvals (according to type)
3
60
SERIES
60 SERIES
General purpose relays 6 - 10 A
60.12 - 52xx
Plug-in mount - 6 A
Bifurcated contacts for low level switching
Type 60.12 - 52xx
- 2 pole, 6 A
Type 60.13 - 52xx
- 3 pole, 6 A
• 2 & 3 pole changeover contacts
• Cadmium Free contacts
(Gold plated Silver Nickel)
• AC coils & DC coils
• Lockable test button with mechanical flag
• 2 pole, 6 A
• Bifurcated contacts with AgNi + Au
• 8 pin plug-in
indicator (preferred version)
• 90 series sockets
• Coil EMC suppression
• Timer accessories 86 series
• European Patent
• 3 pole, 6 A
• Bifurcated contacts with AgNi + Au
• 11 pin plug-in
For UL ratings see:
“General technical information” page V
For outline drawing see page 8
Contact specification
Contact configuration
Rated current/Maximum peak current
Rated voltage/
Maximum switching voltage
A
3 CO (3PDT)
6/10
6/10
250/400
250/400
Rated load AC1
VA
1500
1500
Rated load AC15 (230 V AC)
VA
250
250
Single phase motor rating (230 V AC)
kW
Breaking capacity DC1: 30/110/220 V
A
Minimum switching load
V AC
2 CO (DPDT)
mW (V/mA)
Standard contact material
0.185
0.185
6/0.3/0.12
6/0.3/0.12
50 (5/5)
50 (5/5)
AgNi + Au
AgNi + Au
Coil specification
Nominal voltage (UN)
V AC (50/60 Hz)
6 - 12 - 24 - 48 - 60 - 110 - 120 - 230 - 240 - 400
V DC
Rated power AC/DC
Operating range
VA (50 Hz)/W
6 - 12 - 24 - 48 - 60 - 110 -125 - 220
2.2/1.3
2.2/1.3
AC
(0.8…1.1)UN
(0.8…1.1)UN
DC
(0.8…1.1)UN
(0.8…1.1)UN
Holding voltage
AC/DC
0.8 UN / 0.5 UN
0.8 UN / 0.5 UN
Must drop-out voltage
AC/DC
0.2 UN / 0.1 UN
0.2 UN / 0.1 UN
Mechanical life AC/DC
cycles
20 · 106 / 50 · 106
20 · 106 / 50 · 106
Electrical life at rated load AC1
cycles
250 · 10
250 · 103
ms
11/4
11/4
kV
4
3.6
Technical data
Operate/release time
Insulation between coil
and contacts (1.2/50 μs)
Dielectric strength
between open contacts
Ambient temperature range
Environmental protection
Approvals (according to type)
4
V AC
°C
3
1000
1000
–40…+70
–40…+70
RT I
RT I
I-2018，www.findernet.com
A
60.13 - 52xx
60 SERIES
General purpose relays 6 - 10 A
60
SERIES
60.62
Flange mount - General purpose relay 10 A
60.63
Type 60.62
- 2 pole, 10 A
A
Type 60.63
- 3 pole, 10 A
• Faston 187, (4.8 x 0.8 mm)
• 2 & 3 pole changeover contacts
• AC coils & DC coils
• Cadmium Free contacts
• Contacts material options
• 2 pole, 10 A power contacts
• Flange mount
• Faston 187
• 3 pole, 10 A power contacts
• Flange mount
• Faston 187
For UL ratings see:
“General technical information” page V
For outline drawing see page 8
Contact specification
Contact configuration
Rated current/Maximum peak current
Rated voltage/
Maximum switching voltage
A
3 CO (3PDT)
10/20
10/20
250/400
250/400
Rated load AC1
VA
2500
2500
Rated load AC15 (230 V AC)
VA
500
500
Single phase motor rating (230 V AC)
kW
0.37
0.37
Breaking capacity DC1: 30/110/220 V
A
10/0.4/0.15
10/0.4/0.15
mW (V/mA)
500 (10/5)
500 (10/5)
AgNi
AgNi
Minimum switching load
V AC
2 CO (DPDT)
Standard contact material
Coil specification
Nominal voltage (UN)
Rated power AC/DC
Operating range
V AC (50/60 Hz)
6 - 12 - 24 - 48 - 60 - 110 - 120 - 230 - 240 - 400
V DC
6 - 12 - 24 - 48 - 60 - 110 -125 - 220
VA (50 Hz)/W
AC
DC
2.2/1.3
2.2/1.3
(0.8…1.1)UN
(0.8…1.1)UN
(0.8…1.1)UN
(0.8…1.1)UN
Holding voltage
AC/DC
0.8 UN / 0.5 UN
0.8 UN / 0.5 UN
Must drop-out voltage
AC/DC
0.2 UN / 0.1 UN
0.2 UN / 0.1 UN
Mechanical life AC/DC
cycles
20 · 106 / 50 · 106
20 · 106 / 50 · 106
Electrical life at rated load AC1
cycles
200 · 103
200 · 103
ms
11/4
11/4
kV
4
3.6
Technical data
I-2018，www.findernet.com
Operate/release time
Insulation between coil
and contacts (1.2/50 μs)
Dielectric strength
between open contacts
Ambient temperature range
Environmental protection
Approvals (according to type)
V AC
°C
1000
1000
–40…+70
–40…+70
RT I
RT I
Z
5
60 SERIES
General purpose relays 6 - 10 A
60
SERIES
Ordering information
Example: 60 series plug-in relay, 3 CO (3PDT), 12 V DC coil, test button and mechanical indicator.
A
6 0 . 1
A
B
C
D
3 . 9 . 0 1 2 . 0
0
4
0
A: Contact material
0 = Standard
5 = AgNi + Au
Series
Type
1 = 8/11 pin plug-in
6 = Faston 187 (4.8 x 0.8 mm)
with flange mount
D: Special versions
0 = Standard
C: Options
0 = None
2 = Mechanical indicator
3 = LED (AC)
4 = Lockable test button +
mechanical indicator
5* = Lockable test button + LED (AC)
54* = Lockable test button + LED (AC) +
mechanical indicator
6* = LED + diode (DC, polarity positive
to pin 2)
7* = Lockable test button + LED + diode
(DC, polarity positive to pin 2)
74* = Lockable test button + LED +
diode (DC, polarity positive to pin
2) + mechanical indicator
* Options not available for 220 V DC and
400 V AC versions.
B: Contact circuit
0 = CO (nPDT)
2 = Bifurcated contacts
60.12/13 - 6 A only
No. of poles
2 = 2 pole
3 = 3 pole
Coil version
4 = Current sensing (60.12/13 only)
8 = AC (50/60 Hz)
9 = DC
Coil voltage
See coil specifications
Selecting features and options: only combinations in the same row are possible.
Preferred selections for best availability are shown in bold.
Type
Coil version
A
B
C
D
60.12/13
AC
0
0
0-2-3-4-5
0
AC
0
0
54
/
AC
5
0-2
0-2-3-4-5
0
AC
5
0-2
54
/
DC
0
0
0-2-4-6-7
0
DC
0
0
74
/
DC
5
0-2
0-2-4-6-7
0
DC
5
0-2
74
/
current sensing
0
0
4
0
AC-DC
0-5
0
0
0
60.62/63
C: Option 3, 5, 54
LED (AC)
C: Option 6, 7, 74
LED + diode (DC, polarity
positive to pin 2)
R
Descriptions: Options and Special versions
OP
EAN
EU
N T
T E
P A
2
6
I-2018，www.findernet.com
EAN
3
OP
1
EUR
Lockable test button and mechanical flag indicator (0040, 0050, 0054, 0070, 0074)
The dual-purpose Finder test button can be used in two ways:
Case 1) The plastic pip (located directly above the test button) remains intact. In this case, when the
test button is pushed, the contacts operate. When the test button is released the contacts return to
their former state.
Case 2) The plastic pip is broken-off (using an appropriate cutting tool). In this case, (in addition to
the above function), when the test button is pushed and rotated, the contacts are latched in the
operating state, and remain so until the test button is rotated back to its former position.
In both cases ensure that the test button actuation is swift and decisive.
60 SERIES
General purpose relays 6 - 10 A
60
SERIES
Technical data
Insulation according to EN 61810-1
2 pole
Nominal voltage of supply system
V AC 230/400
Rated insulation voltage
V AC 250
Pollution degree
3 pole
230/400
3
400
250
400
2
3
2
A
Insulation between coil and contact set
Type of insulation
Basic
Basic
Overvoltage category
III
III
Rated impulse voltage
kV (1.2/50 μs) 4
Dielectric strength
3.6
V AC 2000
2000
Type of insulation
Basic
Basic
Overvoltage category
III
III
Insulation between adjacent contacts
Rated impulse voltage
kV (1.2/50 μs) 4
Dielectric strength
3.6
V AC 2000
2000
Insulation between open contacts
Type of disconnection
Micro-disconnection
Dielectric strength
Micro-disconnection
V AC/kV (1.2/50 μs) 1000/1.5
Insulation between coil terminals
Rated impulse voltage (surge) differential mode
(according to EN 61000-4-5)
Other data
1000/1.5
kV(1.2/50 µs) 4
Bounce time: NO/NC
ms 1/4
Vibration resistance (5…55)Hz: NO/NC
g 22/22
Shock resistance
g 20
Power lost to the environment
without contact current
W 1.3
1.3
with rated current
W 2.7 (60.12, 60.62)
3.4 (60.13, 60.63)
Contact specification
H 60 - Maximum DC1 breaking capacity
Resistive load - cosφ = 1
Inductive load - cosφ = 0.4
Cycles
contacts in series
DC breaking current (A)
F 60 - Electrical life (AC) v contact current
DC voltage (V)
• When switching a resistive load (DC1) having voltage and current values
under the curve, an electrical life of ≥ 100 · 103 can be expected.
• In the case of DC13 loads, the connection of a diode in parallel with the
load will permit a similar electrical life as for a DC1 load.
Note: the release time for the load will be increased.
Coil specifications
AC coil data
DC coil data
I-2018，www.findernet.com
Nominal
voltage
Coil code
Operating range
Resistance
Rated coil
absorption
UN
Umin
Umax
R
I at UN
V
V
V
Ω
mA
6
9.006
4.8
6.6
28
214
12
9.012
9.6
13.2
110
109
Nominal
voltage
UN
Coil code
V
6
8.006
Operating range
Umin
Umax
V
V
4.8
6.6
Resistance
R
Ω
Rated coil
absorption
I at UN (50 Hz)
mA
4.6
367
12
8.012
9.6
13.2
19
24
8.024
19.2
26.4
74
90
48
8.048
38.4
52.8
290
47
183
24
9.024
19.2
26.4
445
53.9
48
9.048
38.4
52.8
1770
27.1
60
9.060
48
66
2760
21.7
120
8.120
96
132
1940
18.6
110
9.110
88
121
9420
11.7
230
8.230
184
253
7250
10.5
125
9.125
100
138
12000
10.4
240
8.240
192
264
8500
9.2
220
9.220
176
242
37300
5.8
400
8.400
320
440
19800
60
8.060
48
66
450
37
110
8.110
88
121
1600
20
6
7
60
SERIES
60 SERIES
General purpose relays 6 - 10 A
Coil specifications
R 60 - DC coil operating range v ambient temperature
R 60 - AC coil operating range v ambient temperature
1 - Max. permitted coil voltage.
2 - Min. pick-up voltage with coil at ambient temperature.
1 - Max. permitted coil voltage.
2 - Min. pick-up voltage with coil at ambient temperature.
A
Current sensing version
Current sensing DC coil data
Typical application with current sensing relays.
An open circuit filiment of lamp L1 is detected by the current sensing
relay coil (K1) which causes the back-up safety lamp L2 to be energised,
and indication of failure at the control panel via lamp S1.
Example: navigation light.
L1 = Light
L2 = Safety light
S1= Control light
K1 = Relay
Coil code
Imin (A)
IN (A)
Imax (A)
4202
1.7
2.0
2.4
0.15
4182
1.5
1.8
2.2
0.19
4162
1.4
1.6
1.9
0.24
4142
1.2
1.4
1.7
0.31
4122
1.0
1.2
1.4
0.42
4102
0.85
1.0
1.2
0.61
4092
0.8
0.9
1.1
0.75
4062
0.5
0.6
0.7
1.70
4032
0.25
0.3
0.4
4012
0.085
0.1
0.15
R (Ω)
6.70
61
Current sensing AC coil data
Coil code
Imin (A)
IN (A)
Imax (A)
4251
2.1
2.5
3.0
0.05
4181
1.5
1.8
2.2
0.10
4161
1.4
1.6
1.9
0.12
4121
1.0
1.2
1.4
0.22
4101
0.85
1.0
1.2
0.32
4051
0.42
0.5
0.6
1.28
4041
0.34
0.4
0.5
2.00
4031
0.25
0.3
0.4
3.57
4021
0.17
0.2
0.25
8.0
4011
0.085
0.1
0.15
32.1
R (Ω)
Other types of current sensing relays are available on request.
Outline drawings
Type 60.13/60.13 - 52xx
Type 60.62
Type 60.63
I-2018，www.findernet.com
Type 60.12/60.12 - 52xx
8
90 SERIES
Socket overview for 60 series relays
60
SERIES
Accessories
Module
Socket
Relay
Description
Mounting
Accessories
99.02
90.02
90.03
60.12
60.13
Screw terminal (Box clamp) socket
Double A1 terminal
Panel or 35 mm rail
(EN 60715) mount
-C
oil indication and EMC
suppression modules
- J umper link
- Timer modules
-M
etal retaining clip
Module
Socket
Relay
Description
Mounting
Accessories
99.01
90.20
90.21
60.12
60.13
Screw terminal (Box clamp) socket
Panel or 35 mm rail
(EN 60715) mount
-C
oil indication and EMC
suppression modules
-M
etal retaining clip
Module
Socket
Relay
Description
Mounting
Accessories
—
—
90.82.3
90.83.3
60.12
60.13
Screw terminal (Box clamp) socket
Panel or 35 mm rail
(EN 60715) mount
-M
etal retaining clip
Module
Socket
Relay
Description
Mounting
Accessories
—
—
90.22
90.23
60.12
60.13
Screw terminal (Box clamp) socket
Panel or 35 mm rail
(EN 60715) mount
-M
etal retaining clip
Module
Socket
Relay
Description
Mounting
Accessories
—
—
90.26
90.27
60.12
60.13
Screw terminal (Plate clamp) socket
Panel or 35 mm rail
(EN 60715) mount
-M
etal retaining clip
Module
Socket
Relay
Description
Mounting
Accessories
—
—
90.12
90.13
60.12
60.13
Flange mount solder socket
M3 screw fixing
—
Module
Socket
Relay
Description
Mounting
Accessories
—
—
—
—
90.14
90.14.1
90.15
90.15.1
60.12
60.12
60.13
60.13
PCB socket
PCB
—
90.03
See page 10
See page 11
See page 12
See page 12
See page 13
See page 13
I-2018，www.findernet.com
See page 14
A
90.21
90.83.3
90.23
90.26
90.12
90.15
Sheet of marker tags (CEMBRE Thermal transfer printers) for relay types 60.12 and 60.13,
plastic, 48 tags, 6 x 12 mm
060.48
060.48
9
90 SERIES
Sockets and accessories for 60 series relays
60
SERIES
A
Screw terminal (Box clamp) socket
panel or 35 mm rail (EN 60715) mount
90.02
Blue
For relay type
60.12
90.02.0
Black
90.03
Blue
90.03.0
Black
60.13
Accessories
90.03
Approvals
(according to type):
Metal retaining clip
090.33
6-way jumper link
090.06
Identification tag
090.00.2
Modules (see table below)
99.02
Timer modules (see table below)
86.00, 86.30
Technical data
Certain relay/socket
combinations
Rated values
10 A - 250 V
Dielectric strength
2 kV AC
Protection category
Ambient temperature
Screw torque
Wire strip length
IP 20
°C –40…+70
Nm 0.6
mm 10
P A
PEAN
N
T E
O
O
T
EUR
EUR
Max. wire size for 90.02 and 90.03 sockets
solid wire
stranded wire
mm2 1 x 6 / 2 x 2.5
1 x 4 / 2 x 2.5
AWG 1 x 10 / 2 x 14
1 x 12 / 2 x 14
6-way jumper link for 90.02 and 90.03 sockets
090.06 (blue)
Rated values
10 A - 250 V
090.06.0 (black)
Approvals
(according to type):
PEAN
090.06
86 series timer modules
86.00
Multi-voltage: (12…240)V AC/DC;
Multi-functions: AI, DI, SW, BE, CE, DE, EE, FE; (0.05 s…100 h)
86.00.0.240.0000
(12…24)V AC/DC; Bi-function: AI, DI; (0.05 s…100 h)
86.30.0.024.0000
(110…125)V AC; Bi-function: AI, DI; (0.05 s…100 h)
86.30.8.120.0000
(230…240)V AC; Bi-function: AI, DI; (0.05 s…100 h)
86.30.8.240.0000
Approvals (according to type):
99.02 coil indication and EMC suppression modules for 90.02 and 90.03 sockets
99.02
Approvals
(according to type):
Diode (+A1, standard polarity)
LED
LED
(28…60)V DC/AC 99.02.0.060.59
LED
(110…240)V DC/AC 99.02.0.230.59
LED + Diode (+A1, standard polarity)
(6…24)V DC 99.02.9.024.99
LED + Diode (+A1, standard polarity)
(28…60)V DC 99.02.9.060.99
LED + Diode (+A1, standard polarity)
(110…220)V DC 99.02.9.220.99
LED + Varistor
(6…24)V DC/AC 99.02.0.024.98
LED + Varistor
(28…60)V DC/AC 99.02.0.060.98
LED + Varistor
(110…240)V DC/AC 99.02.0.230.98
RC circuit
RC circuit
DC Modules with nonstandard polarity (+A2) on RC circuit
request.
Residual current by-pass
10
(6…220)V DC 99.02.3.000.00
(6…24)V DC/AC 99.02.0.024.59
(6…24)V DC/AC 99.02.0.024.09
(28…60)V DC/AC 99.02.0.060.09
(110…240)V DC/AC 99.02.0.230.09
(110…240)V AC 99.02.8.230.07
I-2018，www.findernet.com
86.30
90 SERIES
Sockets and accessories for 60 series relays
60
SERIES
Screw terminal (Box clamp) socket
panel or 35 mm rail (EN 60715) mount
90.20
Blue
For relay type
60.12
90.20.0
Black
90.21
Blue
90.21.0
Black
60.13
A
Accessories
90.21
Approvals
(according to type):
Metal retaining clip
(supplied with socket - packaging code SMA)
090.33
Modules (see table below)
99.01
Technical data
Rated values
10 A - 250 V
Dielectric strength
2 kV AC
Protection category
Ambient temperature
Screw torque
Wire strip length
Max. wire size for 90.20 and 90.21 sockets
90.20
IP 20
°C –40…+70
Nm 0.5
mm 10
solid wire
stranded wire
mm2 1 x 6 / 2 x 2.5
1 x 6 / 2 x 2.5
AWG 1 x 10 / 2 x 14
1 x 10 / 2 x 14
90.21
99.01 coil indication and EMC suppression modules for 90.20 and 90.21 sockets
Blue*
Diode (+A1, standard polarity)
Diode (+A2, non-standard polarity)
99.01
Approvals
(according to type):
LED
(6…220)V DC 99.01.3.000.00
(6…220)V DC 99.01.2.000.00
(6…24)V DC/AC 99.01.0.024.59
LED
(28…60)V DC/AC 99.01.0.060.59
LED
(110…240)V DC/AC 99.01.0.230.59
LED + Diode (+A1, standard polarity)
(6…24)V DC 99.01.9.024.99
LED + Diode (+A1, standard polarity)
(28…60)V DC 99.01.9.060.99
LED + Diode (+A1, standard polarity)
* Modules in Black
LED + Diode (+A2, non-standard polarity)
housing are available on
LED + Diode (+A2, non-standard polarity)
request.
LED + Diode (+A2, non-standard polarity)
Green LED is standard.
LED + Varistor
Red LED available on
LED + Varistor
request.
LED + Varistor
(110…220)V DC 99.01.9.220.99
(6…24)V DC 99.01.9.024.79
(28…60)V DC 99.01.9.060.79
(110…220)V DC 99.01.9.220.79
(6…24)V DC/AC 99.01.0.024.98
(28…60)V DC/AC 99.01.0.060.98
(110…240)V DC/AC 99.01.0.230.98
RC circuit
(6…24)V DC/AC 99.01.0.024.09
RC circuit
(28…60)V DC/AC 99.01.0.060.09
RC circuit
(110…240)V DC/AC 99.01.0.230.09
(110…240)V AC 99.01.8.230.07
I-2018，www.findernet.com
Residual current by-pass
11
60
SERIES
90 SERIES
Sockets and accessories for 60 series relays
A
Screw terminal (Box clamp) socket
panel or 35 mm rail (EN 60715) mount
90.82.3
Blue
For relay type
60.12
90.82.30
Black
90.83.3
Blue
90.83.30
Black
60.13
Accessories
Metal retaining clip
90.83.3
Approvals
(according to type):
090.33
Technical data
Rated values
10 A - 250 V
Dielectric strength
2 kV AC
Protection category
Ambient temperature
Screw torque
Max. wire size for 90.82.3 and 90.83.3 sockets
IP 20
°C –40…+70
Nm 0.8
solid wire
stranded wire
mm2 1 x 6 / 2 x 4
1 x 6 / 2 x 4
AWG 1 x 10 / 2 x 14
1 x 10 / 2 x 14
90.82.3
90.83.3
Screw terminal (Box clamp) socket
panel or 35 mm rail (EN 60715) mount
90.22
Blue
90.23
Blue
For relay type
60.12
60.13
Accessories
Metal retaining clip
(supplied with socket - packaging code SMA)
90.23
Approvals
(according to type):
090.33
Technical data
Rated values
10 A - 250 V
Dielectric strength
2 kV AC
Protection category
Ambient temperature
Screw torque
Wire strip length
Max. wire size for 90.22 and 90.23 sockets
Nm 0.5
mm 7
solid wire
stranded wire
mm2 1 x 6 / 2 x 2.5
1 x 6 / 2 x 2.5
AWG 1 x 10 / 2 x 14
1 x 10 / 2 x 14
90.23
I-2018，www.findernet.com
90.22
IP 20
°C –40…+70
12
90 SERIES
Sockets and accessories for 60 series relays
60
SERIES
Screw terminal (Box clamp) socket
panel or 35 mm rail (EN 60715) mount
90.26
Blue
For relay type
60.12
90.26.0
Black
90.27
Blue
90.27.0
Black
60.13
A
Accessories
90.26
Approvals
(according to type):
Metal retaining clip
(supplied with socket - packaging code SMA)
090.33
Technical data
Rated values
10 A - 250 V
Dielectric strength
2 kV AC
Protection category
IP 20
Ambient temperature
°C –40…+70
Screw torque
Nm 0.8
Wire strip length
mm 10
Max. wire size for 90.26 and 90.27 sockets
mm
2
solid wire
stranded wire
1 x 4 / 2 x 2.5
1 x 4 / 2 x 2.5
AWG 1 x 12 / 2 x 14
90.26
90.12
Approvals
(according to type):
1 x 12 / 2 x 14
90.27
Flange mount solder socket mount with M3 screw
90.12 (black)
90.13 (black)
For relay type
60.12
60.13
Technical data
Rated values
10 A - 250 V
Dielectric strength
2 kV AC
Ambient temperature
90.13
I-2018，www.findernet.com
90.12
°C –40…+70
13
60
SERIES
90.15
Approvals
(according to type):
PCB socket
Blue 90.14 (Ø 20.5 mm)
Blue 90.14.1 (Ø 17.5 mm)
90.15 (Ø 22 mm)
90.15.1 (Ø 19 mm)
For relay type
60.13
60.12
Technical data
Rated values
10 A - 250 V
Dielectric strength
2 kV AC
Ambient temperature
90.14
°C –40…+70
90.14.1
90.15
90.14
90.15.1
90.14
90.15
90.15
Packaging codes
How to code and identify retaining clip and packaging options for sockets.
Example:
9 0 . 2
1
S M
A
A
Standard packaging
SM Metal retaining clip
9 0 . 2
1
Without retaining clip
I-2018，www.findernet.com
A
90 SERIES
Sockets and accessories for 60 series relays
14
Please see general technical information
工商网监
湘ICP备2023018690号
