BAV21WS-7-F

Silicon Epitaxial Planar Diode Features: •  Fast Switching Speed •  Surface Mount Package Ideally Suited for Automatic Insertion •  For General Purpose Switching Applications •  High Conductance Applications: Surface mount fast switching diode Max. Rating @ Ta = 25°C unless otherwise specified Parameter Symbol Limits Unit Repetitive peak reverse voltage Vrrm 250 V Working peak reverse voltage DC reverse voltage Vrms Vr 200 V Vr(rms) 141 V Forward continuous current Ifm 400 mA Average rectified output current Io 200 mA Non-Repetitive peak forward surge current                      @t= 1μs                     @t=1s Ifsm 2.5 0.5 mA Repetitive peak forward surge current Ifrm 625 mA Pd 200 mW Thermal resistance junction to ambient air Rθja 625 °C/W Operating and storage temperature range Tj, Tstg -65 to +150 °C RMS reverse voltage Power dissipation Electrical Characteristics @ Ta = 25°C unless otherwise specified Parameter Symbol Conditions Min. Max. Unit - 1 1.25 V Forward voltage Vfm If = 100mA If = 200mA Reverse current Ir Vr = 150V - 0.1 μA Capacitance between terminals Ct Vr = 0V, f = 1MHz - 5 pF Reverse recovery time trr If = Ir = 30mA, Irr = 0.1 × Ir, Rl = 100Ω - 50 ns Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Page 16/09/19 V1.0 Silicon Epitaxial Planar Diode Typical Characteristics @ Ta = 25°C unless otherwise specified Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Page 16/09/19 V1.0 Silicon Epitaxial Planar Diode Plastic surface mounted package Soldering Footprint Package Information Device Package Shipping BAV21WS-7-F SOD-323 3,000 / Tape & Reel Part Number Table Description Part Number Silicon Epitaxial Planar Diode BAV21WS-7-F Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019. Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Page 16/09/19 V1.0