DSI-EV16P-5C

J1772 16A Electric Vehicle Plug With Lead Description: The Plug was designed according to the standard of SAE J1772- 2010. The static resistance is 150Ω, and the resistance will increase to 480Ω when pressing the button. Charging cable 3000/5000mm (3mm × 2.5mm2 + 0.5mm) Specifications: Current and Voltage Signal current Protection Degree Charging cable : 16A 240V AC : 2A < 30V DV : IP54 : 16A 1P+N+PE+PP+CP Cable Speciation: Function 16A 240V L1 (1) 2.5mm2 N (2) 2.5mm2 PE (3) 2.5mm2 CP (4) 0.5mm2 PP (5) Dimensions : Millimetres Part Number Table Description J1772 16A Electric Vehicle Plug with Lead Part Number DSI-EV16P-3C DSI-EV16P-5C Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page 21/03/16 V1.0