HTB-6-750A

Hex Standoff Threaded, Brass Specifications Thread Size - Imperial Spacer Material External Width Body Plating Overall Length Spacing Height Thread Length : 8 - 32 : Brass : 6.35mm : Zinc : 19.05mm : 0.75" : 19.05mm Notes 1. Material : Brass, ASTM-816 2. Finish : Zinc, Plated Per QQ-Z-3258 3. Spacers over 1.00 Long are tapped 0.375 Deep each end Dimensions : Inches (Millimeters) www.element14.com www.farnell.com www.newark.com Page 25/06/12 V1.0 Hex Standoff Threaded, Brass Part Number Table Description Thread Size 4-40 Hex Standoff, Threaded, Brass 6-32 8-32 Length (Inches) Part Number 0.250 HTB-4-250-A 0.375 HTB-4-375-A 0.500 HTB-4-500-A 0.625 2747 0.750 HTB-4-750-A 0.875 2748 1.000 HTB-4-1 000-A 1.500 2749 2.000 2750 0.250 HTB-6-250-A 0.375 HTB-6-375-A 0.500 HTB-6-500-A 0.625 2744 0.750 HTB-6-750-A 0.875 2751 1.000 HTB-6-1 000-A 1.500 2745 2.000 2746 0.250 HTB-8-250-A 0.375 HTB-8-375-A 0.500 HTB-8-500-A 0.625 2752 0.750 HTB-8-750-A 0.875 2753 1.000 HTB-8-1 000-A 1.500 2754 2.000 2755 Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page 25/06/12 V1.0