74002NH

code version datel page 4 PR CAT5E SF/UTP PATCH 26AWG FRNC TECHNICAL DATASHEET PRELIMINARY 2 74002NH 2 2011-04-26 1/3 STANDARDS · ISO/IEC 11801 2nd edition (September 2002) and ISO/IEC 24702 · EN 50173 – 1 (November 2002). · TIA/EIA-568-B.2 (May 2001). CABLE CONSTRUCTION Conductor: Material Stranded PACW Construction 7X0.16 mm (26 AWG) Insulation: Material PP solid Diameter 0.98 mm +/- 0.05 Pair 2 twisted insulated conductors Number of pairs 4, all twisted together Left hand lay. Colour code pair 1 White / Blue & Blue Colour code pair 2 White / Orange & Orange Colour code pair 3 White / Green & Green Colour code pair 4 White / Brown & Brown Pair Tape (optional) Material Polyester tape Foil-Screen Material Al/Polyester (Al side outside) Braided Screen: Material tinned copper Coverage >80% Sheath: Material FRNC UV and oil resistant Diameter 6.5 +/- 0.3 mm Colour Black ã Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner code version datel page 4 PR CAT5E SF/UTP PATCH 26AWG FRNC TECHNICAL DATASHEET PRELIMINARY 2 74002NH 2 2011-04-26 2/3 ELECTRICAL CHARACTERISTICS Low frequency and D.C. D.C. resistance conductor < 145 Ω/km Resistance unbalance 5000 MΩ.km Dielectric strength cond. – cond. (2 sec.) 2.5 kV D.C. Mutual capacitance < 56 nF/km Capacitance unbalance < 1600 pF/km High frequency Velocity of propagation @ 4 – 100 MHz ≥ 0.6 c Skew @ 1 – 100 MHz ≤ 40 ns/100m Propagation delay @ 1 – 100 MHz ≤ 534 + 36/Vf ns/100m Mean characteristic impedance (Zcm) @ 100 MHz 100 ± 5 Ω Input impedance 1-100MHz 100 ± 15 Ω Frequency 0.772 1 4 10 16 20 25 31.25 62.5 100 Insertion loss dB/100m (max) 3.2 6.0 9.5 12.1 13.6 15.3 17.1 24.8 32 NEXT (dB) 67 65.3 56.3 50.3 47.2 45.8 44.3 42.9 38.3 35.3 PSNEXT (dB) 64 62.3 53.3 47.3 44.2 42.8 41.3 39.9 35.4 32.3 ELFEXT (dB) PS ELFEXT (dB) 63.8 51.8 43.8 39.7 37.8 35.8 33.9 27.9 23.8 60.8 48.8 40.8 36.7 34.8 32.8 40.9 24.9 20.8 Return Loss (dB) 19.4 20 23 25 25 25 24.3 23.6 21.5 20.1 MECHANICAL CHARACTERISTICS Elongation at break conductor ≥ 10 % Elongation at break insulation ≥ 100 % Elongation at break sheath ≥ 100 % Tensile strength sheath ≥9 Mpa ENVIRONMENTAL AND OVERALL CHARACTERISTICS Maximum operating voltage 450 V D.C. and 300 V A.C. Maximum continuous current per conductor (@25°C) 1.0 A rms Halogenfree acc to IEC 60754-2 Oil resistant acc IEC 60811-2-1 ã Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner code version datel page 4 PR CAT5E SF/UTP PATCH 26AWG FRNC TECHNICAL DATASHEET PRELIMINARY 2 Maximum pulling tension 80 N Minimum setting/bending radius 35/70 mm Temperature range during installation -5 / +50 °C Temperature range during operation -40 / +80 °C Flame propagation IEC 60332-1 74002NH 2 2011-04-26 3/3 Belden CDT believes this product to be in compliance with the environmental regulations EU RoHS (Directive 2002/95/EC, 27 January 2003); this is valid for all material produced after the RoHS compliant date for this product. ã Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner