7806R 010500

Detailed Specifications & Technical Data ENGLISH MEASUREMENT VERSION 7806R Coax - RG-58 Type For more Information please call 1-800-Belden1 General Description: RG-58 type, 19 AWG solid .037" bare copper conductor, gas-injected foam HDPE insulation, Duofoil® (100% coverage) + tinned copper braid shield (90% coverage), PVC jacket. Physical Characteristics (Overall) Conductor AWG: # Coax AWG Stranding Conductor Material Dia. (in.) 1 19 Solid BC - Bare Copper .037 Total Number of Conductors: 1 Insulation Insulation Material: Insulation Material Dia. (in.) Gas-injected FHDPE - Foam High Density Polyethylene .110 Outer Shield Outer Shield Material: Layer # Outer Shield Trade Name Type Outer Shield Material 1 Duofoil® 2 Coverage (%) Tape Aluminum Foil-Polyester Tape-Aluminum Foil 100 Braid TC - Tinned Copper 90 Outer Jacket Outer Jacket Material: Outer Jacket Material PVC - Polyvinyl Chloride Overall Cable Overall Nominal Diameter: 0.195 in. Mechanical Characteristics (Overall) Operating Temperature Range: -40°C To +75°C Bulk Cable Weight: 27 lbs/1000 ft. Max. Recommended Pulling Tension: 40 lbs. Min. Bend Radius/Minor Axis: 1.750 in. Applicable Specifications and Agency Compliance (Overall) Applicable Standards & Environmental Programs NEC/(UL) Specification: CMR CEC/C(UL) Specification: CMG EU Directive 2011/65/EU (ROHS II): Yes EU CE Mark: Yes EU Directive 2000/53/EC (ELV): Yes EU Directive 2002/95/EC (RoHS): Yes EU RoHS Compliance Date (mm/dd/yyyy): 01/01/2004 EU Directive 2002/96/EC (WEEE): Yes EU Directive 2003/11/EC (BFR): Yes CA Prop 65 (CJ for Wire & Cable): Yes MII Order #39 (China RoHS): Yes RG Type: 58/U Series Type: RF 195 Page 1 of 3 08-26-2016 Detailed Specifications & Technical Data ENGLISH MEASUREMENT VERSION 7806R Coax - RG-58 Type Flame Test UL Flame Test: UL1666 Vertical Shaft CSA Flame Test: FT4 Suitability Suitability - Indoor: Yes Plenum/Non-Plenum Plenum (Y/N): No Electrical Characteristics (Overall) Nom. Characteristic Impedance: Impedance (Ohm) 50 Nom. Inductance: Inductance (µH/ft) .064 Nom. Capacitance Conductor to Shield: Capacitance (pF/ft) 24.3 Nominal Velocity of Propagation: VP (%) 77 Nominal Delay: Delay (ns/ft) 1.320 Nom. Conductor DC Resistance: DCR @ 20°C (Ohm/1000 ft) 7.6 Nominal Outer Shield DC Resistance: DCR @ 20°C (Ohm/1000 ft) 4.2 Maximum VSWR: Description Freq. (MHz) Start Freq. (MHz) Stop Freq. (MHz) Max. VSWR 5 6000 1.25:1 Nom. Attenuation: Freq. (MHz) Attenuation (dB/100 ft.) 5.000 0.750 10.000 1.000 30.000 2.000 50.000 2.500 150.000 4.000 220.000 4.900 450.000 7.100 900.000 10.300 1500.000 13.700 1800.000 15.200 2000.000 16.100 2500.000 18.300 3000.000 20.500 4500.000 26.500 5800.000 31.200 6000.000 32.000 Max. Power Rating: Freq. (MHz) Rating (W) 30 890 50 694 150 403 220 336 450 231 900 162 1500 124 1800 113 2000 107 Page 2 of 3 08-26-2016 Detailed Specifications & Technical Data ENGLISH MEASUREMENT VERSION 7806R Coax - RG-58 Type 2500 95 3000 87 3500 80 4500 70 5800 62 6000 61 Max. Operating Voltage - UL: Voltage 300 V RMS Notes (Overall) Notes: 100% Sweep tested. 6 GHz. Belden® The Wire in Wireless® Put Ups and Colors: Item # Putup Ship Weight Color Notes Item Desc 7806R 0101000 1,000 FT 28.000 LB BLACK C RF195 WIRELESS 50OHM COAXFRPVC 7806R 010500 500 FT 16.500 LB BLACK C RF195 WIRELESS 50OHM COAXFRPVC Notes: C = CRATE REEL PUT-UP. Revision Number: 7 Revision Date: 08-13-2014 © 2016 Belden, Inc All Rights Reserved. Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described herein are subject to error or omission and to change without notice, and the listing of such information and specifications does not ensure product availability. Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein. All sales of Belden products are subject to Belden's standard terms and conditions of sale. Belden believes this product to be in compliance with EU RoHS (Directive 2002/95/EC, 27-Jan-2003). Material manufactured prior to the compliance date may be in stock at Belden facilities and in our Distributor’s inventory. The information provided in this Product Disclosure, and the identification of materials listed as reportable or restricted within the Product Disclosure, is correct to the best of Belden’s knowledge, information, and belief at the date of its publication. The information provided in this Product Disclosure is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. This Product Disclosure is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product. Belden declares this product to be in compliance with EU LVD (Low Voltage Directive 2014/35/EU). Page 3 of 3 08-26-2016