PNEUFIT 10 series
Push-in fittings
>> Port size: Ø 4 ... 14 mm
O/D tube, BSP threads
>> Very compact units
>> Easy tube insertion for
rapid assembly of
pneumatic circuits
>> Straight adaptors
feature internal
hexagon for allen key
>> VMQ free ‘O’-rings
>> Positive tube
anchorage
>> All BSP taper threads
pre-coated with nonPTFE based sealant
Technical features
Medium:
Compressed air
(For other media please consult
Technical Department)
Operating pressure:
Vacuum -18 bar (... 261 psi)
(Dependent upon operating
specification of tubing)
Vacuum:
-750 mm of Hg i.e. 98%
Ambient/Media temperature:
-20°C ... +80°C ( -4 ... 176 °F)
“Special” low temperature options
contact Norgren Technical service
Tube sizes:
4, 5, 6, 8, 10, 12, 14 mm O/D
Tubing types:
PA 11 or 12, PUR and other
plasticised or unplasticised
tubing which conforms to the
tolerances specified in BS 5409,
Part 1, 1976, light and normal
duty, DIN 73378, DIN 74234,
NFE 49-100
Materials:
Nickel plated brass body
Nickel plated brass for collet
VMQ free NBR
'O'-ring (FPM optional)
Plastic sealing washer
(parallel threads)
Non - PTFE thread sealant
(taper threads)
2. Push the tube through the collet
into the fitting.
3. C
ontinue pushing the tube
through the ‘O’-ring until it
bottoms on the tube stop
then pull back.
4. T
o disconnect push the tube into
the fitting, hold down the collet
and withdraw the tube.
Method of assembly
90˚
1. Ensure that the end of the tube
is cut square and is free from
burrs.
Components
1
3
1
2
3
4
4
Collet
Body
Tube stop
‘O’-ring
2
Option selector
10 ˙˙˙˙˙˙˙
Thread type
Thread size/tube size
Shape
Thread size/tube size
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document. (1999 - 900d) © 2015 Norgren Ltd.
3/15
en 9.1.060.01
PNEUFIT 10 series
Push-in fittings
Straight adaptors and connectors
Stem tailpiece
adaptor
(stem to hose bore)
10019
Straight connector
(tube to tube)
10020
Straight stem
connector
10022
Reducing/expanding
connector
10023
Bulkhead connector
(tube to tube)
10029
Mixed bulkhead
connector
10031
Straight stem adaptor
(BSP taper)
10115
Page 3
Page 3
Page 3
Page 3
Page 4
Page 4
Page 4
Straight stem
adaptor
(BSP parallel)
10215
Straight adaptor
(BSP taper)
10125
Straight adaptor
(BSP parallel)
10225
Female straight
adaptor
(female parallel BSP)
10226
Page 4
Page 5
Page 5
Page 5
Elbow adaptors, connectors and banjos
Elbow
connector
10040
Stem elbow
connector
10043
Bulkhead swivel
elbow connector
10049
Elbow adaptor
(BSP taper)
10145
90° Swivel elbow
adaptor
(BSP taper)
10147
90° Swivel elbow
adaptor
(BSP parallel)
10247
Extended swivel
elbow adaptor
(BSP taper)
10154
Page 6
Page 6
Page 6
Page 6
Page 7
Page 7
Page 7
45° Swivel elbow
adaptor
(BSP parallel)
10257
Elbow banjo
assembly
(non-Regulating
BSP parallel)
10A51
Elbow banjo
assembly
(regulating-out
BSP parallel)
10K51
Elbow banjo
assembly
(regulating-out
BSPT taper)
10T00
Elbow banjo
assembly
(regulating-out
BSPT taper)
10TA0
Page 7
Page 8
Page 8
Page 8
Page 8
Tee adaptors, connectors and banjos, ‘Y’ adaptors and connectors, 4-way connectors, manifolds
Tee connector
(tube x 3)
10060
Tee adaptor
(BSP taper)
10165
Swivel tee adaptor
(BSP taper)
10167
Swivel tee adaptor
(BSP parallel)
10267
Tee banjo assembly
(non-regulating
parallel thread)
10A71
Fixed side tee
adaptor
(BSP taper)
10175
Swivel tee adaptor
(BSP taper)
10168
Page 9
Page 9
Page 9
Page 9
Page 10
Page 10
Page 10
Swivel tee adaptor
(BSP parallel)
10268
4-way connector
(tube x 4)
10090
Parallel Y-connector
10082
Parallel Y-adaptor
10188
Parallel Y-adaptor
10288
Manifold
100D6
Manifold
101D6
Page 10
Page 11
Page 11
Page 11
Page 11
Page 12
Page 12
Banjo bodies and bolts
Elbow banjo
body
Tee banjo
body
10051
Page 12
en 9.1.060.02
10071
Banjo bolt
(non-regulating
single stacking)
20A00
Banjo bolt
(non-regulating double
stacking BSP parallel)
20B00
Banjo bolt
(non-regulating triple
stacking BSP parallel)
20C00
Banjo bolt
(non-regulating single
stacking, top port BSP
parallel)
20*00
Banjo bolt
(regulating
single stacking)
20*00
Page 12
Page 13
Page 13
Page 13
Page 13
Page 13
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document. (1999 - 900d) © 2015 Norgren Ltd.
3/15
PNEUFIT 10 series
Push-in fittings
Accessories
Page 14
Page 14
C
Technical data
ØK
4
2,8
14
7,5
10
5
3,4
15
10
11
6
4,4
15,5
11
12
T
øS
V
6
16,5
13
14
7,6
21
14,5
17
12
9,6
24,5
18
20,5
14
11,5
24,5
20
21
øK
C
ØK
Model
4
30
10
100200400
5
32
11
100200500
6
33,5
12
100200600
8
35,5
14
100200800
10
44,5
17
100201000
12
51,5
20,5
100201200
14
52,5
21
100201400
Reducing/expanding connector
10023
C
øA
8
10
øK
Ø
T*1)
øV
Ø
S*2)
øA
ØA
O/D tube
ØA
øK
*1) Dimensions here and in the individual tables refer to the collet being in the
‘IN’ position.
ø A1
Plug (acetal)
11004
øA
Silencer (plug in)
10011
Dimensions in mm
Projection/First angle
Straight connector, tube to tube
10020
*2) Dimensions here (minimum bore diameter) are common per tube size for all
Connectors, elbows and Tees unless otherwise stated.
ø A1
øA
øS
C
ø A2
Stem tailpiece adaptor, stem to hose bore
10019
ØA
Ø A1
Ø A2
C
ØS
Model
4
4,5
3
34
1,8
100190403
4
6,5
5
34
2,1
100190405
5
6,5
5
35,5
2,8
100190505
6
6,5
5
36
2,8
100190605
6
8
6,5
36
4
100190606
8
8
6,5
37
4,3
100190806
8
9,5
8
38,5
5,5
100190808
10
8
6,5
41,5
4,3
100191006
10
9,5
8
43
5,5
100191008
10
12
10
44
7,3
100191010
12
9,5
8
46,5
5,5
100191208
12
12
10
46,5
7,3
100191210
12
15
12,5
47,5
9,7
100191212
14
15
12,5
47
9,7
100191412
ØA
Ø A1
C
ØK
Model
5
4
33,5
10
100230504
6
4
34
10
100230604
6
5
35
11
100230605
8
4
31
10
100230804
8
5
33
11
100230805
8
6
36,5
12
100230806
10
4
31
12
100231004
10
5
36,5
12
100231005
10
6
37,5
12
100231006
10
8
38
14
100231008
12
4
35
14
100231204
12
5
35
14
100231205
12
6
35
14
100231206
12
8
42
14
100231208
12
10
50
17
100231210
14
6
36,5
16
100231406
14
8
37,5
16
100231408
14
10
46,5
17
100231410
14
12
53,5
20,5
100231412
øA
C
øK
øA
øS
C
ø A1
Reducing/expanding connector
10023
Straight stem connector
10022
ØA
C
ØS
Model
ØA
Ø A1
C
ØK
Model
4
30
2,6
100220400
4
6
35
12
100230406
6
8
37,5
14
100230608
5
33
3,4
100220500
6
34
4
100220600
8
36
6
100220800
10
45
7,6
100221000
12
52
9,6
100221200
14
52
11,5
100221400
3/15
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document. (1999 - 900d) © 2015 Norgren Ltd.
en 9.1.060.03
PNEUFIT 10 series
Push-in fittings
Bulkhead connector, tube to tube
10029
Dimensions in mm
Projection/First angle
Mixed bulkhead connector
10031
C
C
B
O
øA
B
øA
øA1
1
P
O
P
E
ØA
B
C
O
P
Model
Ø A & Ø A1
B
C
E
O
P
4
M10x1,0
30
12
9
14
100290400
4
M12x1,0
27
6
9,5
9
8
17
100310404
5
M12x1,0
32
14
9
17
100290500
6
M15x1,0
29,5
7
9,5
10
13
22
100310606
6
M14x1,5
35,5
15
10
19
100290600
8
M18x1,5
33,5
8
11
10
13
24
100310808
8
M16x1,5
36,5
16
10
22
100290800
10
M20x1,5
40
8
14,5
11
17
27
100311010
10
M20x1,5
43,5
14
11
27
100291000
12
M24x1,5
44
9
17,5
11
19
30
100311212
12
M24x1,5
50,5
15
11
30
100291200
14
M26x1,5
46
11,5
18,5
11
22
32
100311414
14
M24x1,5
50,5
15
11
30
100291400
Straight stem adaptor, BSP taper
10115
1
Model
Straight stem adaptor, BSP parallel
10215
C
C
øS
øS
B
øA
B
øA
øK1
G
G
ØA
B
C
G
ØS
Model
ØA
B
C
G
Ø K1
ØS
4
R1/8
30
7,5
2,1
10
101150418
4
G1/8
29
5
13,5
2,1
8
102150418
4
R1/4
33,5
11
2,1
14
101150428
4
G1/4
33
7,5
17,5
2,1
10
102150428
5
R1/8
31
7,5
3,2
11
101150518
5
G1/8
30,5
5
13,5
3,3
8
102150518
5
R1/4
35
11
3,2
14
101150528
5
G1/4
34
7,5
17,5
3,3
10
102150528
6
R1/8
32
7,5
4,1
12
101150618
6
G1/8
31
5
13,5
4
8
102150618
6
R1/4
35
11
4,1
14
101150628
6
G1/4
34,5
7,5
17,5
4
10
102150628
8
R1/8
33
7,5
7,1
14
101150818
8
G1/8
32,5
5
13,5
5
10
102150818
8
R1/4
36,5
11
5,1
14
101150828
8
G1/4
35,5
7,5
17,5
6
10
102150828
8
R3/8
40
12,5
5,1
19
101150838
8
G3/8
39
9
21,5
6
13
102150838
10
R1/4
40
11
7,7
15
101151028
10
G1/4
41,5
7,5
17,5
6,5
13
102151028
10
R3/8
45
12,5
7,7
19
101151038
10
G3/8
43,5
9
21,5
8
13
102151038
10
R1/2
48
16
8,1
22
101151048
10
G1/2
49
12
25,5
8
17
102151048
12
R3/8
48
12,5
9,1
19
101151238
12
G3/8
48,5
9
21,5
10
17
102151238
12
R1/2
51,5
16
9,1
22
101151248
12
G1/2
52,5
12
25,5
10
17
102151248
14
R1/2
51,5
16
11,2
22
101151448
14
G3/8
48,5
9
21,5
10
17
102151438
14
G1/2
52,5
12
25,5
11,5
17
102151448
en 9.1.060.04
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document. (1999 - 900d) © 2015 Norgren Ltd.
Model
3/15
PNEUFIT 10 series
Push-in fittings
Straight adaptor, BSP parallel
10225
Dimensions in mm
Projection/First angle
Straight adaptor, BSP taper
10125
C
G
G
B
øA
øK
C
G
B
øA
C
B
øA
ø K1
1
1
ØA
B
C
G
ØK
Ø K1
Model
ØA
B
C
G
4
M3
21
2,5
9
–
–
1,5
102250403
4
R1/8
20,5
10
4
M5
21,5
3,5
9
–
–
2,5
102250405
4
R1/4
23
11
14
3
101250428
4
G1/8
19
5,5
–
14
10
3
102250418
5
R1/8
22,5
7,5
10
4
101250518
4
G1/4
21
8
–
18
10
3
102250428
5
R1/4
23
11
14
4
101250528
5
M5
23
3,5
10
–
–
2,5
102250505
6
R1/8
23
7,5
11
4
101250618
5
G1/8
23,5
5,5
–
14
10
4
102250518
6
R1/4
25
11
14
4
101250628
5
G1/4
22,5
8
–
18
12
4
102250528
8
R1/8
26,5
7,5
13
5
101250818
6
M5
24
3,5
11
–
–
2,5
102250605
8
R1/4
28
11
14
6
101250828
6
G1/8
25
5,5
–
14
11
4
102250618
8
R3/8
27
12,5
17
6
101250838
6
G1/4
23,5
8
–
18
13
4
102250628
8
R1/2
29
16
22
6
101250848
8
G1/8
26,5
5,5
–
14
13
5
102250818
10
R1/8
31,5
7,5
17
5
101251018
8
G1/4
28
8
–
18
14
6
102250828
10
R1/4
34
11
17
7
101251028
8
G3/8
24,5
9
–
12
17
6
102250838
10
R3/8
34
12,5
17
8
101251038
8
G1/2
28,5
11
–
26
17
6
102250848
10
R1/2
33,5
16
22
8
101251048
10
G1/8
32
5,5
–
14
17
5
102251018
12
R1/4
39
11
22
7
101251228
10
G1/4
33,5
8
–
18
17
7
102251028
12
R3/8
39
12,5
22
10
101251238
10
G3/8
32,5
9
–
22
19
8
102251038
12
R1/2
40
16
22
10
101251248
10
G1/2
30,5
11
–
26
19
8
102251048
14
R3/8
39,5
12,5
22
10
101251438
12
G1/4
36,5
8
–
18
22
7
102251228
14
R1/2
40
16
22
10
101251448
12
G3/8
37,5
9
–
22
22
10
102251238
12
G1/2
34,5
11
–
26
22
10
102251248
14
G3/8
37,5
9
–
22
22
10
102251438
14
G1/2
38,5
11
–
26
22
10
102251448
1
Model
1
10
3
101250418
Female straight adaptor, female parallel BSP
10226
B
øA
C
G
3/15
ØA
B
C
G
4
M5
22,5
5
10
102260405
4
G1/8
24,5
7,5
13
102260418
4
G1/4
29
5
17
102260428
5
M5
23,5
7,5
10
102260505
5
G1/8
25,5
7,5
13
102260518
5
G1/4
29,5
7,5
17
102260528
6
G1/8
26
11
13
102260618
6
G1/4
30,5
11
17
102260628
8
G1/8
27
11
13
102260818
8
G1/4
31,5
11
17
102260828
10
G1/4
36,5
11
17
102261028
10
G3/8
39
11,5
19
102261038
12
G3/8
41
11,5
19
102261238
12
G1/2
44,5
15
24
102261248
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document. (1999 - 900d) © 2015 Norgren Ltd.
Model
en 9.1.060.05
PNEUFIT 10 series
Push-in fittings
Elbow connector
10040
Dimensions in mm
Projection/First angle
Stem elbow connector
10043
C
E
C
øA
øA
C
øA
ø A1
ØA
C
Model
ØA
Ø A1
C
E
Model
4
17
100400400
4
4
9,5
25
100430400
5
18,5
100400500
6
6
19
27,5
100430600
6
19,5
100400600
8
8
21
29,5
100430800
8
21,5
100400800
8
5
19,5
30
100430805
10
26,5
100401000
12
31,5
100401200
14
33
100401400
Elbow adaptor, BSP taper
10145
C
G
C
E
G
øA
E
øA
øK
Bulkhead swivel elbow connector
10049
G1
B
øA
øB
ØA
ØB
C
E
G
G1
ØK
Model
ØA
B
C
E
G
4
M12x1,0
35,5
20,5
21,5
7
10
17
100490400
4
R1/8
15
17
7,5
7
101450418
5
M12x1,0
35,5
21,5
21,5
7
11
17
100490500
4
R1/4
20
18
11
11
101450428
6
M14x1,5
40
24
24,5
7
12
19
100490600
5
R1/8
15,5
18,5
7,5
7
101450518
8
M16x1,5
45
26,5
30
7
14,5
22
100490800
5
R1/4
20
20
11
11
101450528
10
M22x1,5
49
31,5
31
9
17
27
100491000
6
R1/8
16
19,5
7,5
8
101450618
12
M24x1,5
54
38
32,5
12
20,5
30
100491200
6
R1/4
20
20
11
11
101450628
14
M26x1,5
57
38
32,5
15
22,5
32
100491400
8
R1/8
17
21,5
7,5
11
101450818
8
R1/4
20
21,5
11
11
101450828
8
R3/8
23
22
12,5
13
101450838
8
R1/2
29
24
16
17
101450848
10
R1/8
18,5
26,5
7,5
13
101451018
10
R1/4
21,5
26,5
11
13
101451028
10
R3/8
23
26,5
12,5
13
101451038
10
R1/2
29
28,5
16
17
101451048
12
R1/4
23,5
31,5
11
16
101451228
12
R3/8
25
31,5
12,5
16
101451238
12
R1/2
29
32
16
17
101451248
en 9.1.060.06
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document. (1999 - 900d) © 2015 Norgren Ltd.
Model
3/15
PNEUFIT 10 series
Push-in fittings
90o Swivel elbow adaptor, BSP taper
10147
Dimensions in mm
Projection/First angle
90o Swivel elbow adaptor,
BSP parallel
10247
C
C
1
G
G
E
E
øA
øA
øK
1
B
B
øK1
ØA
B
C
E
G
ØK
B
C
E
G
Ø K1
R1/8
17
20,5
7,5
10
10
7
1 Model
101470418
ØA
4
4
M3
17
17,5
3,5
–
8
7
1 Model
102470403
4
R1/4
17
24
11
10
14
7
101470428
4
M5
17
21,5
4
8
8
7
102470405
5
R1/8
18,5
21
7,5
11
11
9
101470518
4
G1/8
17
22
5,5
14
11
7
102470418
5
R1/4
18,5
24,5
11
11
14
9
101470528
4
G1/4
17
25,5
8
18
11
7
102470428
6
R1/8
19,5
21,5
7,5
12
11
9
101470618
5
M5
18,5
20
4
8
8
9
102470505
6
R1/4
19,5
25
11
12
14
9
101470628
5
G1/8
18,5
22,5
5,5
14
11
9
102470518
6
R3/8
20
27,5
12,5
12
17
8
101470638
5
G1/4
18,5
26
8
18
11
9
102470528
8
R1/8
21,5
23
7,5
14,5
14
11
101470818
6
M5
19,5
20,5
4
8
8
9
102470605
8
R1/4
21,5
26
11
14,5
14
11
101470828
6
G1/8
19,5
23
5,5
14
11
9
102470618
8
R3/8
22
30,5
12,5
14,5
17
13
101470838
6
G1/4
19,5
26,5
8
18
11
9
102470628
8
R1/2
22
34,5
16
14,5
22
13
101470848
8
G1/8
21,5
24
5,5
14
13
11
102470818
10
R1/8
26,5
25,5
7,5
17
14
13
101471018
8
G1/4
21,5
29
8
18
17
11
102470828
10
R1/4
26,5
29
11
17
17
13
101471028
8
G3/8
22
33,5
9
22
19
13
102470838
10
R3/8
26,5
30,5
12,5
17
17
13
101471038
8
G1/2
22
39,5
11
26
19
13
102470848
10
R1/2
26,5
34,5
16
17
22
13
101471048
10
G1/8
26,5
26,5
5,5
14
17
13
102471018
12
R1/4
31,5
32
11
20,5
19
16
101471228
10
G1/4
26,5
31,5
8
18
17
13
102471028
12
R3/8
31,5
34
12,5
20,5
22
16
101471238
10
G3/8
26,5
33,5
9
22
19
13
102471038
12
R1/2
31,5
38
16
20,5
22
16
101471248
10
G1/2
26,5
39,5
11
26
19
13
102471048
14
R3/8
30,5
33
12,5
21,5
22
17
101471438
12
G1/4
31,5
35,5
8
18
19
16
102471228
14
R1/2
31,5
37
16
21,5
22
17
101471448
12
G3/8
31,5
37
9
22
19
16
102471238
12
G1/2
31,5
43
11
26
19
16
102471248
14
G3/8
30,5
36
9
22
19
17
102471438
14
G1/2
31,5
39
11
26
24
17
102471448
Extended swivel elbow adaptor, BSP taper
10154
45o Swivel elbow adaptor, BSP parallel
10257
A
C
øA
C
ø
1
G
G
E
E
45°
B
B
ØA
B
C
E
G
4
R1/8
17
34
7,5
1
10
7
øK1
Model
ØA
B
C
E
G
Ø K1
101540418
6
G1/8
17,5
19,5
5
14
Model
11
102570618
4
R1/4
17
40
11
14
7
101540428
6
G1/4
17,5
23
7,5
18
11
102570628
6
R1/8
19,5
36,5
7,5
11
9
101540618
8
G1/8
19,5
20,5
5
14
11
102570818
8
G1/4
19,5
26
7,5
18
17
102570828
6
R1/4
19,5
41
11
14
9
101540628
8
R1/8
21,5
40,5
7,5
14
11
101540818
8
R1/4
21,5
44,5
11
14
11
101540828
8
R3/8
22
51,5
12,5
17
13
101540838
10
R3/8
26,5
51,5
12,5
17
13
101541038
3/15
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document. (1999 - 900d) © 2015 Norgren Ltd.
en 9.1.060.07
PNEUFIT 10 series
Push-in fittings
Elbow banjo assembly,
non-regulating BSP parallel
10A51
Dimensions in mm
Projection/First angle
Elbow banjo assembly,
regulating-out BSP parallel
10K51
C
E
E
øA
2
G
1
G
øK
øA
C
øS
1
B
øS
2
B
ØA
B
C
E
G
ØK
ØS
Model
ØA
B
C
E
G
ØS
4
M5
18,5
22
4
9,5
2,5
8
10A510405
4
M5
18,5
27
4,5
2,5
4
G1/8
20,5
30
6
11
5
14
10A510418
4
G1/8
20,5
34
6
5
14
10K510418
5
M5
20
22
4
11
2,5
8
10A510505
5
M5
20
27
4,5
2,5
8
10K510505
5
G1/8
21,5
30
6
11,5
5
14
10A510518
5
G1/8
21,5
34
6
5
14
10K510518
6
G1/8
23,5
30
6
12,5
5
14
10A510618
6
M5
22
27
4,5
2,5
8
10K510605
6
G1/4
24
34
7,5
13
8,5
17
10A510628
6
G1/8
23,5
34
6
5
14
10K510618
8
G1/8
23,5
30
6
14
5
14
10A510818
6
G1/4
24
36,5
6
8,5
17
10K510628
8
G1/4
24,5
34
7,5
14
8,5
17
10A510828
8
G1/8
23,5
34
6
5
14
10K510818
8
G3/8
26,5
41
9
16,5
10
22
10A510838
8
G1/4
24,5
36,5
6
8,5
17
10K510828
10
G1/4
30
34
7,5
16
8,5
17
10A511028
8
G3/8
26,5
51,5
10
10
22
10K510838
10
G3/8
31
41
9
17
10
22
10A511038
10
G1/4
30
36,5
6
8,5
17
10K511028
Elbow banjo assembly,
regulating out BSPT taper
10T00
Model
8
10K510405
10
G3/8
31
51,5
10
10
22
10K511038
12
G3/8
33
51,5
10
10
22
10K511238
12
G1/2
38
57,5
10
10
27
10K511248
Elbow banjo assembly,
regulating out BSPT taper
10TA0
C
C
1
E
øA
2
1
1
2
Model
ØA
B
C
E/E1
G
10T000418
4
R1/8
22
53/22,5
9,5
B
ØA
B
C
E/E1
G
4
R1/8
22
42/22,5
9,5
1
14
16
G
1
G
1
2
E1
E1
øA
2
E
1
B
1
14
16
Model
10TA00418
6
R1/8
23
42/22,5
9,5
14
16
10T000618
6
R1/8
23
53/22,5
9,5
14
16
10TA00618
6
R1/4
25,5
54/29,5
13,5
17
20
10T000628
6
R1/4
25,5
67/29,5
13,5
17
20
10TA00628
8
R1/8
24,5
42/22,5
9,5
14
16
10T000818
8
R1/4
27
67/29,5
14,5
17
20
10TA00828
8
R1/4
27
54/29,5
13,5
17
20
10T000828
8
R3/8
28
78/33
14,5
19
22
10TA00838
8
R3/8
28
64/33
14,5
19
22
10T000838
10
R1/4
31,5
67/29,5
13,5
17
20
10TA01028
10
R1/4
31,5
54/29,5
13,5
17
20
10T001028
10
R3/8
32,5
78/33
14,5
19
22
10TA01038
12
R1/2
38
90/41,5
16
22
28
10TA01248
10
R3/8
32,5
64/33
14,5
19
22
10T001038
12
R1/2
38
72/41,5
16
22
28
10T001248
en 9.1.060.08
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document. (1999 - 900d) © 2015 Norgren Ltd.
3/15
PNEUFIT 10 series
Push-in fittings
Tee connector, tube x 3
10060
Dimensions in mm
Projection/First angle
Tee adaptor, BSP taper
10165
C
G
E
E
øA
øA
C
B
ØA
C
E
Model
ØA
B
C
E
G
4
34
17
7
100600400
4
R1/8
34
15
7,5
5
37
18,5
7
100600500
5
R1/8
37
15,5
7,5
7
101650518
6
39
19,5
8
100600600
5
R1/4
40
20
11
11
101650528
8
42,5
21,5
11
100600800
6
R1/8
39
16
7,5
8
101650618
10
53,5
26,5
13
100601000
6
R1/4
40
20
11
11
101650628
12
63,5
31,5
16
100601200
8
R1/8
42,5
17
7,5
11
101650818
14
66,5
33
17
100601400
8
R1/4
42,5
20
11
11
101650828
Swivel tee adaptor, BSP taper
10167
101650418
8
R3/8
44
23,5
12,5
13
101650838
10
R1/4
53,5
21,5
11
13
101651028
10
R3/8
53,5
23,5
12,5
13
101651038
12
R1/4
63,5
23,5
11
16
101651228
12
R3/8
63
25
12,5
16
101651238
Swivel tee adaptor, BSP parallel
10267
C
C
øA
1
E
øA
1
G
G
E
øK
Model
7
B
B
øK1
ØA
B
C
E
G
ØK
Model
ØA
B
C
E
G
Ø K1
4
R1/8
34
21,5
7,5
10
10
7
101670418
4
M3
34
16
3,5
–
7
8
1 Model
102670403
4
R1/4
34
24
11
10
14
7
101670428
4
M5
34
19,5
4
8
7
8
102670405
5
R1/8
37
22
7,5
11
11
9
101670518
4
G1/8
34
22
5,5
14
7
11
102670418
5
R1/4
37
24,5
11
11
14
9
101670528
5
M5
37
20
4
8
9
8
102670505
6
R1/8
39
22,5
7,5
12
11
9
101670618
5
G1/8
37
22
5,5
14
9
11
102670518
6
R1/4
39
25
11
12
14
9
101670628
5
G1/4
37
26
8
18
9
11
102670528
8
R1/8
42,5
24
7,5
14,5
14
11
101670818
6
M5
39
20,5
4
8
9
8
102670605
8
R1/4
42,5
26
11
14,5
14
11
101670828
6
G1/8
39
23
5,5
14
9
11
102670618
8
R3/8
43,5
30,5
12,5
14,5
17
13
101670838
6
G1/4
39
26,5
8
18
9
11
102670628
10
R1/4
53,5
29
11
17
17
13
101671028
8
G1/8
42,5
23,5
5,5
14
11
13
102670818
10
R3/8
53,5
30,5
12,5
17
17
13
101671038
8
G1/4
42,5
29
8
18
11
17
102670828
10
R1/2
53,5
34,5
16
17
22
13
101671048
8
G3/8
43,5
22
9
22
13
19
102670838
12
R1/4
63,5
32
11
20,5
19
16
101671228
10
G1/4
53,5
31,5
8
18
13
17
102671028
12
R3/8
63,5
34
12,5
20,5
22
16
101671238
10
G3/8
53,5
33,5
9
22
13
19
102671038
12
R1/2
63,5
38
16
20,5
22
16
101671248
12
G1/4
63,5
35,5
8
18
16
19
102671228
14
R3/8
61,5
33
12,5
22,5
22
17
101671438
12
G3/8
63,5
37
9
22
16
19
102671238
14
R1/2
63,5
37
16
22,5
22
17
101671448
14
G1/2
63,5
39
11
26
17
24
102671448
3/15
1
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document. (1999 - 900d) © 2015 Norgren Ltd.
en 9.1.060.09
PNEUFIT 10 series
Push-in fittings
Tee banjo assembly, non-regulating parallel thread
10A71
Dimensions in mm
Projection/First angle
Fixed side tee adaptor, BSP taper
10175
E
C
G
øS
C1
øA
øK
G
øA
E
C
B
B
ØA
B
C
E
G
ØK
ØS
Model
ØA
B
C
C1
E
G
4
M5
37,5
22
4
9,5
2,5
8
10A710405
4
R1/8
32
15
17
7,5
4
G1/8
41
30
6
11
5
14
10A710418
5
R1/8
34
15,5
18,5
7,5
7
101750518
5
M5
40,5
22
4
11
2,5
8
10A710505
5
R1/4
40
20
20
11
11
101750528
5
G1/8
43,5
30
6
11,5
5
14
10A710518
6
R1/8
35,5
16
19,5
7,5
8
101750618
6
M5
41,5
22
4
11,5
2,5
8
10A710605
6
R1/4
40
20
20
11
11
101750628
6
G1/8
47,5
30
6
12,5
5
14
10A710618
8
R1/8
38
17
21,5
7,5
11
101750818
6
G1/4
48,5
34
7,5
13
8,5
17
10A710628
8
R1/4
41,5
20
21,5
11
11
101750828
8
G1/8
47,5
30
6
14
5
14
10A710818
8
R3/8
45,5
23,5
22
12,5
13
101750838
8
G1/4
49,5
34
7,5
14
8,5
17
10A710828
10
R1/4
48,5
21,5
26,5
11
13
101751028
10
R3/8
50
23,5
26,5
12,5
13
101751038
12
R1/4
55
23,5
31,5
11
16
101751228
12
R3/8
56,5
25
31,5
12,5
16
101751238
Swivel tee adaptor, BSP parallel
10268
E
C
C1
C1
C
øA
E
101750418
øA
Swivel tee adaptor, BSP taper
10168
Model
7
G
G
1
B
B
ø K1
ØA
B
C
C1
E
G
Model
ØA
B
C
C1
E
G
Ø K1
4
R1/8
38,5
20,5
17
7,5
7
10
101680418
4
M3
34
17
17
3,5
-
8
102680403
4
R1/4
41
24
17
11
7
14
101680428
4
M5
36,5
19,5
17
4
8
8
102680405
5
R1/8
40,5
22
18,5
7,5
9
11
101680518
4
G1/8
38,5
22
17
5,5
14
11
102680418
5
R1/4
43
24,5
18,5
11
9
14
101680528
5
M5
39
20
18,5
4
8
8
102680505
6
R1/8
42
22,5
19,5
7,5
9
11
101680618
5
G1/8
40,5
22,5
18,5
5,5
14
11
102680518
6
R1/4
44,5
25
19,5
11
9
14
101680628
5
G1/4
44,5
26
18,5
8
18
11
102680528
8
R1/8
45
24
21,5
7,5
11
14
101680818
6
G1/8
42,5
23
19,5
5,5
14
11
102680618
8
R1/4
47,5
26
21,5
11
11
14
101680828
6
G1/4
46
26,5
19,5
8
18
11
102680628
8
R3/8
52,5
30,5
22
12,5
13
17
101680838
8
G1/8
45
24
21,5
5,5
14
13
102680818
10
R1/4
55,5
29
26,5
11
13
17
101681028
8
G1/4
50,5
29
21,5
8
18
17
102680828
10
R3/8
57
30,5
26,5
12,5
13
17
101681038
8
G3/8
55
33
21,5
9
22
19
102680838
12
R1/4
63,5
32
31,5
11
16
19
101681228
10
G1/4
58,5
31,5
26,5
8
18
17
102681028
12
R3/8
66
34
31,5
12,5
16
22
101681238
10
G3/8
60
33,5
26,5
9
22
19
102681038
12
R1/2
70
38
31,5
16
16
22
101681248
12
G1/4
67
35,5
31,5
8
18
19
102681228
14
R3/8
66,5
33
33
12,5
17
22
101681438
12
G3/8
68,5
37
31,5
9
22
19
102681238
14
R1/2
70
37
33
16
17
22
101681448
14
G3/8
69
36
33
9
22
19
102681438
14
G1/2
72,5
39
33
11
26
24
102681448
en 9.1.060.10
1
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document. (1999 - 900d) © 2015 Norgren Ltd.
Model
3/15
PNEUFIT 10 series
Push-in fittings
Parallel Y-Connector
10082
Dimensions in mm
Projection/First angle
Parallel Y-Adaptor
10188
C
C
B
L
N
øA
øK
L
øA1
N
øA
G
øD
1
For tupe ø 4 ... 8 = ø 3
For tupe ø 10 = ø 4
O
O
1
ØA
Ø A1
C
ØD
L
N
ØK
O
Model
ØA
B
C
G
L
N
O
4
4
34
3
11
22
11
10,5
100820400
4
R1/8
43,5
7,5
11
22,5
10,5
Model
10
101880418
6
6
38,5
3
14
27
13
12,5
100820600
6
R1/8
48
7,5
14
28
12,5
11
101880618
6
4
38
3
14
27
13
12,5
100820604
8
R1/8
51
7,5
16
32
13,5
14
101880818
8
8
40,5
3
16
31
15
13,5
100820800
8
R1/4
54,5
11
16
32
13,5
11
101880828
8
6
40,5
3
16
31
15
13,5
100820806
10
R3/8
67
12,5
22
42,5
15
19
101881038
10
R1/2
70
16
22
42,5
15
22
101881048
10
10
49,5
4
20,5
42
20
15
100821000
10
8
49,5
4
20,5
42
20
15
100821008
Parallel Y-Adaptor
10288
C
B
L
N
øA
G
O
ø3
ØA
B
C
G
L
N
O
4
M5
42,5
4
11
22,5
10,5
10
102880405
Model
6
M5
47
4
14
28
12,5
11
102880605
4-way connector, tube x 4
10090
C
øA
øK
C
ØA
C
ØK
4
42
10,5
10
100900400
5
45,5
11
10
100900500
6
47,5
12
10
100900600
8
57,5
14,5
13
100900800
10
68,5
17
13
100901000
3/15
Model
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document. (1999 - 900d) © 2015 Norgren Ltd.
en 9.1.060.11
PNEUFIT 10 series
Push-in fittings
Dimensions in mm
Projection/First angle
Manifold
100D6
C
N
E
L
øA1
1
øA
H
2
D
N1
Ø A/Ø A1 C
ØD
E
H
L
N
N1
Model
8/4
68
3,4
42
9
13
12,5
20
100D60804
8/6
68
3,4
42
9
13
12,5
20
100D60806
10/6
83
3,4
48
10,5
15
17
22,5
100D61006
10/8
83
3,4
48
10,5
15
17
22,5
100D61008
Manifold
100D6
C
E
N
øA1
L
G
2
D
H
1
B
1
2
øA
For tupe ø 8 = ø 16
For tupe ø 10 = ø 20
For tupe ø 8 = ø 14
For tupe ø 10 = ø 16
N1
ØA
Ø A1
B
C
ØD
E
G
H
L
N
N1
8
4
R1/4
83
3,4
42
11
9
13
12,5
20
17
101D60428
8
4
R3/8
85
3,4
42
12,5
9
13
12,5
20
19
101D60438
8
6
R1/4
83
3,4
42
11
9
13
12,5
20
17
101D60628
8
6
R3/8
85
3,4
42
12,5
9
13
12,5
20
19
101D60638
10
8
R3/8
100
3,4
48
12,5
10,5
15
17
22,5
19
101D60838
10
8
R1/2
104
3,4
48
16
10,5
15
17
22,5
22
101D60848
Elbow banjo body
10051
Model
Tee banjo body
10071
C
G
øA
øK
G
øK
øA
C
B
B
ØA
B for screw
C
G
ØK
Model
ØA
B for screw
C
G
ØK
4
M5
18,5
12,5
9,5
100510405
4
M5
37,5
12,5
9,5
100710405
4
G1/8
20,5
14
11
100510418
4
G1/8
41
14
11
100710418
5
M5
20
12,5
11
100510505
5
M5
40
12,5
11
100710505
5
G1/8
21,5
14
11,5
100510518
5
R1/8
43
14
11,5
100710518
6
M5
22
12,5
12,5
100510605
6
M5
41,5
12,5
11,5
100710605
6
G1/8
23,5
14
12,5
100510618
6
G1/8
47,5
14
12,5
100710618
6
G1/4
24
16
13
100510628
6
G1/4
48,5
16
13
100710628
8
G1/8
23,5
14
14
100510818
8
G1/8
47,5
14
14
100710818
8
G1/4
24,5
16
14
100510828
8
G1/4
49,5
16
14
100710828
8
G3/8
26,5
20,5
16,5
100510838
10
G1/4
30
16
16
100511028
10
G3/8
31
20,5
17
100511038
12
G3/8
33
20,5
17,5
100511238
12
G1/2
38
22
17,5
100511248
en 9.1.060.12
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document. (1999 - 900d) © 2015 Norgren Ltd.
Model
3/15
PNEUFIT 10 series
Push-in fittings
Banjo bolt, non-regulating stacking
20A00, 20B00, 20C00
Dimensions in mm
Projection/First angle
Banjo bolt, non-regulating single
stacking with top port BSP parallel
20*00
C
C
B1
øS
øS
B
B
B
C
ØS
Execution
Model
B
B1
C
ØS
M5
22
2,5
single
8
20A000005
M5
M5
25,5
2,5
8
20D000505
G1/8
29
5
single
14
20A000018
M5
G1/4
34
8,5
17
20D000528
G1/4
33
8,5
single
17
20A000028
M5
G3/8
41
10
22
20D000538
G3/8
41
10
single
22
20A000038
G1/8
G1/8
36
5
14
20E001818
G1/2
49
11,5
single
27
20A000048
G1/8
G1/4
35,5
6
17
20E001828
M5
34,5
2,5
double
8
20B000005
G1/8
G3/8
41
10
22
20E001838
G1/8
46,5
5
double
14
20B000018
G1/4
G1/4
45
8,5
17
20F002828
G1/4
52,5
8,5
double
17
20B000028
G3/8
G3/8
52
10
22
20G003838
G3/8
64
10
double
22
20B000038
G1/2
72,5
11,5
double
27
20B000048
G1/8
63
5
triple
14
20C000018
G1/4
71,5
8,5
triple
17
20C000028
G3/8
87
10
triple
22
20C000038
Regulating out banjo bolts single stacking,
(screwdriver adjustable), regulating out
20K00
Model
1
C
C
Regulating out banjo bolts, single stacking,
(screwdriver adjustable), regulating in
20L00
2
1
2
B
B
B
C
Operating pressure
Model
B
C
Operating pressure
M5
27,5
10 bar
8
20K000005
M5
27,5
10 bar
8
Model
20L000005
G1/8
34
10 bar
14
20K000018
G1/8
34
10 bar
14
20L000018
G1/4
36,5
10 bar
17
20K000028
G1/4
36,5
10 bar
17
20L000028
G3/8
51,5
10 bar
22
20K000038
G3/8
51,5
10 bar
22
20L000038
G1/2
57
10 bar
27
20K000048
G1/2
57
10 bar
27
20L000048
C
Regulating out banjo bolts,
single stacking (screwdriver adjustable),
bi-directional 20M00
B
B
C
Operating pressure
M5
27,3
10 bar
8
20M000005
G1/8
34
10 bar
14
20M000018
G1/4
36,5
10 bar
17
20M000028
G3/8
51,5
10 bar
22
20M000038
G1/2
57
10 bar
27
20M000048
3/15
Model
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document. (1999 - 900d) © 2015 Norgren Ltd.
en 9.1.060.13
PNEUFIT 10 series
Push-in fittings
Silencer, plug in
10011
Dimensions in mm
Projection/First angle
Plug (Acetal)
11004
C
C
øA
øK
øA
øK
F
ØA
C
F
ØK
Model
ØA
C
ØK
Model
4
31,5
16,5
11
100110400
4
26,5
9,5
110040400
6
33,5
18,5
11
100110600
5
28
10,5
110040500
8
40,5
19,5
13
100110800
6
28,5
11,5
110040600
10
53,5
24
19
100111000
8
29,5
12,5
110040800
12
57
27,5
19
100111200
10
34
15,5
110041000
12
37,5
16,5
110041200
14
37,5
19,5
110041400
Warning
These products are intended for use in industrial compressed air
systems only. Do not use these products where pressures and
temperatures can exceed those listed under
»Technical features/data«.
Before using these products with fluids other than those specified,
for non-industrial applications, life-support systems or other
applications not within published specifications, consult IMI NORGREN.
Through misuse, age, or malfunction, components used in fluid
power systems can fail in various modes.
en 9.1.060.14
The system designer is warned to consider the failure modes of all
component parts used in fluid power systems and to provide adequate
safeguards to prevent personal injury or damage to equipment in the
event of such failure.
System designers must provide a warning to end users in the system
instructional manual if protection against a failure mode cannot be
adequately provided.
System designers and end users are cautioned to review specific
warnings found in instruction sheets packed and shipped with these
products.
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document. (1999 - 900d) © 2015 Norgren Ltd.
3/15