241 001

Thread-cutting tools Extension sleeves DIN 377 Version: Shank: hardened and ground square as per DIN 10 As extension to hand thread-cutting tools. Inside and outside square of identical size. Packing unit: Individual plastic pack 1.6 Square mm Length mm M 2,1 2,7 3,4 4,9 5,5 7,0 9,0 11,0 12,0 14,5 16,0 18,0 60,0 80,0 95,0 110,0 115,0 125,0 135,0 150,0 155,0 174,0 185,0 195,0 M 1 - M 2,6 M3 M4 M 5-M 8 M 9 - M 10 M 12 M 13 - M 16 M 18 M 20 M 22 - M 24 M 27 - M 28 M 30 - M 32 for hand tape size Ww 1/16 - 3/32 — 5/32 7/32 - 5/16 3/8 1/2 9/16 - 5/8 11/16 - 3/4 13/16 7/8 - 15/16 1 1 1/8 G — — — — 1/8 — 1/4 — 1/2 5/8 3/4 7/8 Article no. Price / each € 241 021 241 027 241 034 241 049 241 055 241 070 241 090 241 110 241 120 241 145 241 160 241 180 Tap wrench with ratchet Version: Shank: Surface: adjustable left, right, fixed sliding cross-handle with grooves at both ends chromium-plated Ideal for thread-cutting in inaccessible places. With two-jaw chuck for tensioning square shanks. Packing unit: Individual plastic pack Size Length mm M 1 2 10 20 85,0 100,0 250,0 300,0 M 3 - M 10 M 5 - M 12 M 3 - M 10 M 5 - M 12 for hand tape size Ww 1/8 - 3/8 7/32 - 1/2 1/8 - 3/8 7/32 - 1/2 G — 6 1/8 — 6 1/8 Article no. Price / each € 241 001 241 002 241 010 241 020 Adjustable tap wrenches as per DIN 1814 Version: Chuck jaws: die-cast zinc housing hardened Ideal for thread-cutting in inaccessible places. With two-jaw chuck for tensioning square shanks. With steel handles one of which can be unscrewed. Packing unit: Individual plastic pack Size 0 1 1 1/2 2 3 4 5 6 7 Length mm M 130,0 180,0 180,0 280,0 380,0 500,0 700,0 1000,0 1200,0 M 1-M 8 M 1 - M 10 M 1 - M 12 M 3,5 - M 12 M 5 - M 20 M 11 - M 27 M 13 - M 32 M 19 - M 38 M 25 - M 52 for hand tape size Ww 1/16 - 5/16 - 3/8 1/8 - 1/2 3/16 - 5/8 1/4 - 3/4 1/2 - 1 5/8 - 1 1/4 3/4 - 1 1/2 7/8 - 2 1/8 G — — 1/8 1/8 - 3/8 1/8 - 1/2 1/8 - 3/4 1/4 - 1 1/4 - 1 1/4 5/8 - 2 1/4 Article no. 241 100 241 101 241 112 241 102 241 103 241 104 241 105 241 106 241 107 - 123 - Price / each €