111-01980

Cable Ties and Fixings 1.1 Cable Ties Inside Serrated Cable Ties Polyamide 6.6 standard T-Series in PA66 natural and black T-Series cable ties for bundling and securing of cables, pipes and hoses. These cable ties can be used for nearly all kind of applications. Features and benefits • Available in a wide range of materials and sizes • High tensile strength with very low insertion force • Only high quality plastic is used meeting recycling targets • Inside serrated cable ties for a strong hold onto bundles • Ergonomic bent tail offers quick and simple installation • Easy application either manually or with an application tool L Standard T-Series cable ties – for almost any type of application (PA66). W T-Series T18S T18R T18I T18L T25L T25LL T30R T30L T30LL T40R T50S T50R T50M T50I T50L T50LL T80R Width (W) Length (L) Bundle Ø max. 2.3 83.0 16.0 2.5 100.0 22.0 Material Colour Pack Cont. Tools 80 PA66 Natural (NA) 1,000 pcs. 2;4-6 111-02809 80 PA66 Natural (NA) 100 pcs. 2;4-6 111-01919 2.5 100.0 22.0 80 PA66 Black (BK) 100 pcs. 2;4-6 111-01910 2.5 145.0 35.0 80 PA66 Black (BK) 100 pcs. 2;4-6 111-02370 2.5 145.0 35.0 80 PA66 Natural (NA) 100 pcs. 2;4-6 111-02319 2.5 205.0 55.0 80 PA66 Natural (NA) 100 pcs. 2;4-6 111-02119 2.5 205.0 55.0 80 PA66 Black (BK) 100 pcs. 2;4-6 111-02110 2.8 240.0 65.0 110 PA66 Black (BK) 100 pcs. 2;4-6 111-02500 2.8 240.0 65.0 110 PA66 Natural (NA) 100 pcs. 2;4-6 111-02519 2.8 330.0 95.0 110 PA66 Natural (NA) 100 pcs. 2;4-6 111-02619 3.5 150.0 35.0 135 PA66 Natural (NA) 100 pcs. 2;4-6 111-03219 3.5 150.0 35.0 135 PA66 Black (BK) 100 pcs. 2;4-6 111-03210 3.5 198.0 50.0 135 PA66 Natural (NA) 100 pcs. 2;4-6 111-03419 3.5 198.0 50.0 135 PA66 Black (BK) 100 pcs. 2;4-6 111-03410 3.5 290.0 80.0 135 PA66 Black (BK) 100 pcs. 2;4-6 111-03500 3.5 290.0 80.0 135 PA66 Natural (NA) 100 pcs. 2;4-6 111-03529 4.0 175.0 40.0 180 PA66 Natural (NA) 100 pcs. 2;4-8 111-01626 4.6 150.0 35.0 225 PA66 Black (BK) 100 pcs. 2-10 111-05810 4.6 150.0 35.0 225 PA66 Natural (NA) 100 pcs. 2-10 111-05819 4.6 200.0 50.0 225 PA66 Black (BK) 100 pcs. 2-10 111-05000 4.6 200.0 50.0 225 PA66 Natural (NA) 100 pcs. 2-10 111-05013 4.6 245.0 65.0 225 PA66 Natural (NA) 100 pcs. 2-10 111-06201 4.6 245.0 65.0 225 PA66 Black (BK) 100 pcs. 2-10 111-06200 4.6 300.0 85.0 225 PA66 Black (BK) 100 pcs. 2-10 111-05210 4.6 300.0 85.0 225 PA66 Natural (NA) 100 pcs. 2-10 111-05219 4.6 390.0 110.0 225 PA66 Natural (NA) 100 pcs. 2-10 111-05409 4.6 390.0 110.0 225 PA66 Black (BK) 100 pcs. 2-10 111-05400 4.6 445.0 130.0 225 PA66 Black (BK) 500 pcs. 2-10 111-06002 4.7 210.0 55.0 355 PA66 Natural (NA) 100 pcs. 2-12 111-05019 4.7 210.0 55.0 355 PA66 Black (BK) 100 pcs. 2-12 111-08010 All dimensions in mm. Subject to technical changes. Minimum Order Quantity (MOQ) may differ from package content. Other packaging options may also be available. For product specific approvals and specifications please refer to the Appendix. 40 Article-No. Further information at www.HellermannTyton.com/fixings Date of issue: 10/2017 TYPE Cable Ties and Fixings 1.1 Cable Ties Inside Serrated Cable Ties Polyamide 6.6 standard T-Series in PA66 natural and black L Material specification please see page 26. W T-Series TYPE T80I T80L T120S T120I T150R T120R(E) T120M T120XM T120L T150L T150M T150XL T150XLL T250S Width (W) Length (L) Bundle Ø max. 4.7 300.0 85.0 355 Material Colour Pack Cont. Tools Article-No. PA66 Natural (NA) 100 pcs. 2-12 111-08229 4.7 300.0 85.0 355 PA66 Black (BK) 100 pcs. 2-12 111-08210 4.7 390.0 110.0 355 PA66 Black (BK) 100 pcs. 2-12 111-05410 4.7 390.0 110.0 355 PA66 Natural (NA) 100 pcs. 2-12 111-05419 7.6 225.0 55.0 535 PA66 Natural (NA) 50 pcs. 3;9-12 111-12829 7.6 300.0 80.0 535 PA66 Black (BK) 100 pcs. 3;9-12 111-12210 7.6 300.0 80.0 535 PA66 Natural (NA) 100 pcs. 3;9-12 111-12219 7.6 365.0 100.0 670 PA66 Black (BK) 100 pcs. 3;9-12 111-14810 7.6 365.0 100.0 670 PA66 Natural (NA) 100 pcs. 3;9-12 111-14819 7.6 387.0 100.0 535 PA66 Black (BK) 100 pcs. 3;9-12 111-12010 7.6 387.0 100.0 535 PA66 Natural (NA) 100 pcs. 3;9-12 111-12019 7.6 460.0 125.0 535 PA66 Black (BK) 100 pcs. 3;9-12 111-12610 7.6 460.0 125.0 535 PA66 Natural (NA) 100 pcs. 3;9-12 111-12619 7.6 600.0 175.0 535 PA66 Black (BK) 50 pcs. 3;9-12 111-12701 7.6 600.0 175.0 535 PA66 Natural (NA) 50 pcs. 3;9-12 111-12704 7.6 760.0 225.0 535 PA66 Black (BK) 50 pcs. 3;9-12 111-12403 7.6 760.0 225.0 535 PA66 Natural (NA) 50 pcs. 3;9-12 111-12429 8.8 820.0 245.0 780 PA66 Black (BK) 25 pcs. 9-12 111-15405 8.8 820.0 245.0 780 PA66 Natural (NA) 25 pcs. 9-12 111-15419 8.9 530.0 150.0 780 PA66 Black (BK) 25 pcs. 9-12 111-00124 8.9 530.0 150.0 780 PA66 Natural (NA) 25 pcs. 9-12 111-15619 8.9 1,095.0 330.0 780 PA66 Black (BK) 25 pcs. 9-12 111-15500 8.9 1,095.0 330.0 780 PA66 Natural (NA) 25 pcs. 9-12 111-15519 8.9 1,325.0 405.0 780 PA66 Black (BK) 25 pcs. 9-12 111-15300 8.9 1,325.0 405.0 780 PA66 Natural (NA) 25 pcs. 9-12 111-15304 12.5 225.0 55.0 1,115 PA66 Natural (NA) 100 pcs. 11-12 111-24705 T250X 12.5 370.0 100.0 1,115 PA66 Black (BK) 100 pcs. 11-12 111-25102 T250R 12.5 515.0 125.0 1,115 PA66 Natural (NA) 25 pcs. 11-12 111-24803 12.5 565.3 150.0 1,115 PA66 Black (BK) 25 pcs. 11-12 111-25001 T250M 12.5 565.3 150.0 1,115 PA66 Natural (NA) 25 pcs. 11-12 111-25002 T250I 12.5 730.0 203.0 1,115 PA66 Natural (NA) 25 pcs. 11-12 111-25219 T250L 12.5 880.0 254.0 1,115 PA66 Black (BK) 25 pcs. 11-12 111-24601 T250XL 12.5 1,030.0 305.0 1,115 PA66 Black (BK) 25 pcs. 11-12 111-25200 12.5 1,030.0 305.0 1,115 PA66 Natural (NA) 25 pcs. 11-12 111-00466 All dimensions in mm. Subject to technical changes. Minimum Order Quantity (MOQ) may differ from package content. Other packaging options may also be available. Date of issue: 10/2017 Recommended Tools 2 3 4 5 6 7 8 9 10 11 12 MK20 MK21 MK3SP MK3PNSP2 EVO7 MK7HT MK7P MK6 EVO9 EVO9HT MK9P 551 551 552 552 554 555 556 557 554 554 558 For more information on toolings please refer to the Application Tooling chapter. For product specific approvals and specifications please refer to the Appendix. Further information at www.HellermannTyton.com/fixings 41 Cable Ties and Fixings 1.0 Material Information Material Specification Overview Material Shortcut Operating Temperature Colour** Aluminium-alloy AL -40 °C to +180 °C Natural (NA) • Corrosion resistant • Antimagnetic Chloroprene CR -20 °C to +80 °C Black (BK) • Weather-resistant • High yield strength Material Properties* E/TFE -80 °C to +170 °C Blue (BU) UL 94 V0 Polyacetal POM -40 °C to +90 °C, (+110 °C, 500 h) Natural (NA) UL 94 HB Polyamide 11 PA11 -40 °C to +85 °C, (+105 °C, 500 h) Black (BK) UL 94 HB Polyamide 12 PA12 -40 °C to +85 °C, (+105 °C, 500 h) Black (BK) UL 94 HB • Good chemical resistance to: acids, bases, oxidizing agents • UV- resistant Polyamide 4.6 PA46 -40 °C to +150 °C (5000 h), +195 °C (500 h) Natural (NA), Grey (GY) UL 94 V2 • Resistance to high temperatures • Very moisture sensitive • Low smoke sensitiv Polyamide 6 PA6 -40 °C to +80 °C Black (BK) UL 94 V2 • High yield strength PA6HIR -40 °C to +80 °C Black (BK) UL 94 HB • Limited brittleness sensitivity • Higher flexibility at low temperature PA66 -40 °C to +85 °C, (+105 °C, 500 h) Black (BK), Natural (NA) UL 94 V2 • High yield strength Polyamide 6.6, glass-fibre reinforced PA66GF13, PA66GF15 -40 °C to +105 °C Black (BK) UL 94 HB • Good resistance to: lubricants, vehicle fuel, salt water and a lot of solvent Polyamide 6.6, heat and UV stabilised PA66HSW -40 °C to +105 °C Black (BK) UL 94 V2 • High yield strength • Modified elevated max. temperature • UV-resistant Polyamide 6.6, heat stabilised PA66HS -40 °C to +105 °C Black (BK), Natural (NA) UL 94 V2 • High yield strength • Modified elevated max. temperature Polyamide 6.6, high impact modified PA66HIR -40 °C to +80 °C, (+105 °C, 500 h) Black (BK) UL 94 HB Polyamide 6.6, high impact modified, heat and UV stabilised PA66HIRHSW -40 °C to +110 °C Black (BK) UL 94 HB Polyamide 6.6, high impact modified, heat stabilised PA66HIRHS -40 °C to +105 °C Black (BK) UL 94 HB Polyamide 6.6, high impact modified, ScanBlack PA66HIR(S) -40 °C to +80 °C, (+105 °C, 500 h) Black (BK) UL 94 HB • Limited brittleness sensitivity • Higher flexibility at low temperature PA66W -40 °C to +85 °C, (+105 °C, 500 h) Black (BK) UL 94 V2 • High yield strength • UV-resistant Polyamide 6.6 Polyamide 6.6, UV-resistant Material Specifications • Resistance to radioactivity • UV- resistant, not moisture sensitive • Good chemical resistance to: acids, bases, oxidizing agents • Limited brittleness sensitivity • Flexible at low temperature • Not moisture sensitive • Robust on impacts • Bio-plastic, derived from vegetable oil • Strong impact resistance at low temperature • Very low moisture absorption • Weather-resistant • Good chemical resistanc Ethylene Tetrafluoroethylene (Tefzel®) Polyamide 6, high impact modified 26 Flammability • Limited brittleness sensitivity • Higher flexibility at low temperature • Limited brittleness sensitivity • Higher flexibility at low temperature • Modified elevated max. temperature • High yield strength, UV-resistant • Limited brittleness sensitivity • Higher flexibility at low temperature • Modified elevated max. temperature Further information at www.HellermannTyton.com/fixings Date of issue: 10/2017 MATERIAL Cable Ties and Fixings Material Information Material Shortcut Operating Temperature Polyamide 6.6, with metal particles PA66MP Polyamide 6.6, with metal particles Polyamide 6.6 V0 MATERIAL Colour** Flammability -40 °C to +85 °C, (+105 °C, 500 h) Blue (BU) UL 94 HB • High yield strength • Metal and X-Ray detectable PA66MP+ -40 °C to +85 °C Blue (BU) not flame retardant • High yield strength • Metal and x-ray detectable PA66V0 -40 °C to +85 °C White (WH) UL 94 V0 • High yield strength • Low smoke emission SP -50 °C to +150 °C Black (BK) halogen free • UV-resistant • Good chemical resistance to: most acids, alkaliks and oils PEEK -55 °C to +240 °C Beige (BGE) UL 94 V0 • Resistance to radioactivity • Not moisture sensitive • Good chemical resistance to: acids, bases, oxidizing agents Polyethylene PE -40 °C to +50 °C Black (BK), Grey (GY) UL 94 HB • Low moisture absorption • Good chemical oilsresistance to: most acids, alcohol and oils Polyolefin PO -40 °C to +90 °C Black (BK) UL 94 V0 • Low smoke emissions Polypropylene PP -40 °C to +115 °C Black (BK), Natural (NA) UL 94 HB • Floats in water • Moderate yield strength • Good chemical resistance to: organic acids PP, EPDM -20 °C to +95 °C Black (BK) UL 94 HB • Good resistance to high temperatures • Good chemical and abrasion resistance Polypropylene with metal particles PPMP -40 °C to +115 °C Blue (BU) UL 94 HB • Metal and X-Ray detectable • Heat resistant • Moderate yield strength • Good chemical resistance Polypropylene with metal particles PPMP+ -40 °C to +85 °C Blue (BU) not flame retardant • High yield strength • Metal and x-ray detectable Polyvinylchloride PVC -10 °C to +70 °C Black (BK), Natural (NA) UL 94 V0 • Low moisture absorption • Good chemical resistance to: acids, ethanol and oil Stainless Steel SS304, SS316 -80 °C to +538 °C Natural (NA) non-burning • Corrosion resistant • Antimagnetic • Weather resistant • Outstanding chemical resistance Thermoplastic Polyurethane TPU -40 °C to +85 °C Black (BK) UL 94 HB • High elastic • Good chemical resistance to: acids, bases and oxidizing agents Polyester Polyetheretherketone Polypropylene, Ethylene-PropyleneDien-Terpolymererubber free of Nitrosamine Date of issue: 10/2017 Tefzel® is a registered trademark of DuPont. General linguistic usage for cable ties made from raw material E/TFE is Tefzel®-Tie. In additon to Tefzel® from DuPont HellermannTyton is also using equivalent E/TFE raw material from other suppliers. *These details are only rough guide values. They should not be regarded as a material specification and are no substitute for a suitability test. Please see our datasheets for further details. Material Properties* 1.0 Material Specifications **More colours on request. HF = Halogenfree LFH = Limited Fire Hazard RoHS = Restriction of Hazardous Substances Further information at www.HellermannTyton.com/fixings 27