304-90064-01

Dimensions in mm Connectors according to DIN 41612 / IEC 60603-2 Type C/2 Female connector Hole pattern Press-fit technology – Performance level II Termination length No. of contacts 16 32 48 Contact arrangement a b c 4 3 2 1 4 3 2 1 4 3 2 1 a b c a b c Part number 104-69004-xx 104-79006-xx 104-79106-xx 304-69014-02 304-79016-03 304-79116-04 304-69064-02 304-79066-03 304-79166-04 Accessories – Press-fit tool (see page 208) – Support tool (see page 209) – Coding accessories (see page 160) On request – Performance levels I + III or customer-specific – Special contact length – Alternative surface Sn, e. g. for WireWrap Note – * Rear mating zone Ni, Au Ordering note Only for 104 – PCB 1.5 to 2.0 mm = xxx-xxxxx-01 termination length = 3.2 mm – PCB 2.0 to 2.8 mm = xxx-xxxxx-02 termination length = 4.6 mm – PCB > 2.8 mm = xxx-xxxxx-03 termination length = 4.6mm 102 Options – Without flange – Contact arrangement (see page 162) ept GmbH & Co. KG I Phone +49 (0) 88 61/25 01 0 I Fax +49 (0) 88 61/55 07 I E-mail sales@ept.de I www.ept.de Connectors according to DIN 41612 / IEC 60603-2 Type C/2 Female connector Solder technology – Performance level II Termination length Manual soldering with solder lug No. of contacts 16 32 48 Contact arrangement a b c 4 3 2 1 4 3 2 1 4 3 2 1 a b c a b c Accessories – Coding accessories (see page 160) Part number 104-90004 – – 104-90006 104-90025 304-90014-05 304-90014-01 304-90014-02 304-90016-03 104-90035 304-90064-05 304-90064-01 304-90064-02 304-90066-03 104-90075 On request – Performance levels I + III or customer-specific – Special contact length – Also in THTR Options – Board lock (see page 159) – Contact arrangement (see page 162) ept GmbH & Co. KG I Phone +49 (0) 88 61/25 01 0 I Fax +49 (0) 88 61/55 07 I E-mail sales@ept.de I www.ept.de 103