102-90065

Dimensions in mm Connectors according to DIN 41612 / IEC 60603-2 Type B/2 Female connector Hole pattern Press-fit technology – Performance level II Termination length No. of contacts 16 Contact arrangement a b 4 3 2 1 4 3 2 1 32 Part number 102-69004-xx 102-79006-xx 102-79106-xx 102-69064-xx 102-79066-xx 102-79166-xx Accessories – Press-fit tool (see page 208) – Support tool (see page 209) – Coding accessories (see page 160) On request – Performance levels I + III or customer-specific – Special contact length – Alternative surface Sn, e. g. for WireWrap Note – * Rear mating zone performance level II Ordering note – PCB 1.5 to 2.0 mm = xxx-xxxxx-01 with termination length = 3.2 mm – PCB 2.0 to 2.8 mm = xxx-xxxxx-02 with termination length = 4.6 mm – PCB > 2.8 mm = xxx-xxxxx-03 with termination length = 4.6 mm 90 Options – Without flange – Contact arrangement (see page 162) ept GmbH I Phone +49 (0) 88 61 / 25 01 0 I Fax +49 (0) 88 61 / 55 07 I E-mail sales@ept.de I www.ept.de Connectors according to DIN 41612 / IEC 60603-2 Type B/2 Female connector Solder technology – Performance level II Termination length Manual soldering with solder lug No. of contacts 16 Contact arrangement a b 4 3 2 1 4 3 2 1 32 Accessories – Coding accessories (see page 160) Part number 102-90004 102-90005 102-90006 102-90025 102-90064 102-90065 102-90066 102-90075 On request – Performance levels I + III or customer-specific – Also in THTR Options – Board lock (see page 159) – Contact arrangement (see page 162) ept GmbH I Phone +49 (0) 88 61 / 25 01 0 I Fax +49 (0) 88 61 / 55 07 I E-mail sales@ept.de I www.ept.de 91