302-40064-01

Dimensions in mm Connectors according to DIN 41612 / IEC 60603-2 Type B Female connector Hole pattern Press-fit technology – Performance level II Termination length No. of contacts 32 32 Contact arrangement a b 4 3 2 1 4 3 2 1 4 3 2 1 a b 64 Part number 302-63014-02 302-65015-03 302-65016-04 102-63024-xx 102-65025-xx 102-65026-xx 302-63064-02 302-65065-03 302-65066-04 Accessories – Press-fit tool (see page 208) – Support tool (see page 209) – Coding accessories (see page 160) On request – Performance levels I + III or customer-specific – Special contact length – Alternative surface Sn, e. g. for WireWrap Options – Without flange – Contact arrangement (see page 162) Note – * Rear mating zone Ni, Au Ordering note Only for 102 – PCB 1.5 to 2.0 mm = xxx-xxxxx-01 termination length = 3.2 mm – PCB 2.0 to 2.8 mm = xxx-xxxxx-02 termination length = 4.6 mm – PCB > 2.8 mm = xxx-xxxxx-03 termination length = 4.6 mm Cross reference – Type B with IDC (see page 156) 86 ept GmbH & Co. KG I Phone +49 (0) 88 61/25 01 0 I Fax +49 (0) 88 61/55 07 I E-mail sales@ept.de I www.ept.de Connectors according to DIN 41612 / IEC 60603-2 Type B Female connector Solder technology – Performance level II Termination length Manual soldering with solder lug No. of contacts 32 Contact arrangement a b 4 3 2 1 4 3 2 1 64 Accessories – Coding accessories (see page 160) Part number 102-40024 – – 102-40026 102-40044 302-40064-05 302-40064-01 302-40064-02 302-40065-03 102-40074 On request – Performance levels I + III or customer-specific – Special contact length – Also in THTR Options – Board lock (see page 159) – Contact arrangement (see page 162) Cross reference – Type B with IDC (see page 156) ept GmbH & Co. KG I Phone +49 (0) 88 61/25 01 0 I Fax +49 (0) 88 61/55 07 I E-mail sales@ept.de I www.ept.de 87