3687561

Accessories for subracks Ripac box type plug-in units/installation Covers Packs of for type I and II box type plug-in units Unit width Without vent slots For slide-in fastening. Board depth 160 mm Material: 1.0 mm aluminium, untreated With vent slots For screw fastening. Suitable for the installation of guide rails. Model No. RP with vent slots1) without vent slots 8 HP 1 – 3687.555 10 HP 1 3687.556 3685.689 12 HP 1 3687.557 3685.690 14 HP 1 3687.558 3685.691 21 HP 1 3687.559 3685.692 28 HP 1 3687.560 3685.693 42 HP 1 3687.561 3685.694 Board depth 220 mm Material: 1.2 mm sheet steel, spray-finished Colour: RAL 9006 8 HP 1 – 3687.562 10 HP 1 3687.563 3685.701 12 HP 1 3687.564 3685.702 14 HP 1 3687.565 3685.703 21 HP 1 3687.566 3685.704 28 HP 1 3687.567 3685.705 42 HP 1 3687.568 3685.706 Also required: 1) Assembly screws, packs of 100 sets, Model No. RP 3685.289, see page 577. B Covers for type I und II box type plug-in units Slide-in, with vent holes (EMC). Material: 1.0 mm aluminium, untreated Accessories for subracks 3.5 Model No. RP Unit width Packs of Board depth 160 mm 220 mm 8 HP 1 3687.585 – 10 HP 1 3685.683 3685.695 12 HP 1 3685.684 3685.696 14 HP 1 3685.685 3685.697 21 HP 1 3685.686 3685.698 28 HP 1 3685.687 3685.699 42 HP 1 3685.688 3685.700 Guide rails for box type plug-in units, see page 512. Rittal Catalogue 31/Electronic packaging 545