1266-20-000

A G lobal Laser Bran d Gated Cameo Gated Cameo The Gated Cameo is a miniature laser diode module that has a threaded barrel for easy bulkhead mounting which ensures good thermal contact between module and heat sink. This new concept in laser module design allows a laser diode, an adjustable collimating lens and a drive circuit to be incorporated within a body which is just 23mm long and all without compromising the performance. The Gated Cameo offers high output power stability with transient and polarity protection, as well as electrical isolation between diode and case. It has a latching connector that improves reliability. An A/R coated user adjustable collimating lens produces an elliptical output beam which can by focused to produce fine spots. It also features a third TTL modulation input which allows the user to turn the input on and off with a bandwidth of ≥100Khz. A fourth wire which controls the slow speed enable input allows the user to switch the laser on and off from interlocks and switch’s Further versatility is provided by the wide range of external optics available which simply screws into the end of the laser module, allowing the user to quickly and efficiently switch from one projection to another. The range includes Homogeneous lines and cross’s and diffractive patterns. Specifications Product Specification Farnell Part Number 2065359 2065360 2065358 2065359 Imatronic Part Number 1266-03 1266-04 1266-01 1266-02 Gated Cameo 650nm 1mW, A Lens Gated Cameo 650nm 3mW, A Lens Gated Cameo 635nm 1mW, A Lens Gated Cameo 635nm 3mW, A Lens Output Power (mW) 0.8 2.8 0.8 2.8 Wavelength (nm) 650 650 635 635 2 3R 2 3R Model Laser Class Operating Voltage (Vdc) Operating Current (mA) 3.3 to 5.0 20-35 30-50 Operating Case Temperature (°C) -10 to +45 Storage Temperature (°C) -10 to +80 Beam Size At Aperture (mm) 3 by 1 Beam Divergence (mrad) 29,000 ±1.5% 12.6 Dimensions (mm) 14x14 Diameter by 24 Housings Brass M12 Threaded Front and Black Plastic Back Isolated Body Yes Connector Type JST PHR4 4 Pin Lead Length (mm) Input Leads >100,000 500 Red Lead +Ve Black Lead 0V Yellow Lead TTL Modulation: Off = 2V Blue Lead TTL Enable: Off = 2V TTL Modulation Frequency Range (Khz) (Yellow Lead) Typical Rise & Fall Time (µs) ≥100 TTL Enable Input Delay (ms) ≤5 2 NOTES All specifications are typical @ 25°C Specifications Product Specification Farnell Part Number Imatronic Part Number 1266-20 1266-21 1266-22 1266-23 Gated Cameo 785nm 1mW, A Lens Gated Cameo 785nm 3mW, A Lens Gated Cameo 850nm 1mW, A Lens Gated Cameo 850nm 3mW, A Lens Output Power (mW) 0.8 2.8 0.8 2.8 Wavelength (nm) 785 785 850 850 Laser Class 3R 3R 3R 3R Model Operating Voltage (Vdc) Operating Current (mA) 3.3 to 5.0 30-40 20-40 15-30 Operating Case Temperature (°C) -10 to +55 Storage Temperature (°C) -10 to +80 Beam Size At Aperture (mm) 3 by 1 Beam Divergence (mrad)