45015

‘AZERTY’ ‘QWERTY’ (EU) 3 Accessories Tape cassettes Width: 6mm (3/4") Length: 7m Black/Clear 43610 Blue/Clear ––––– Red/Clear ––––– Black/White 43613 Blue/White ––––– Red/White ––––– Black/Blue ––––– Black/Red ––––– Black/Yellow 43618 Black/Green ––––– White/Clear ––––– White/Black ––––– Black/Silver ––––– Black/Gold ––––– Black/Fluo Green ––––– Black/Fluo Red ––––– UK Adapter 40075 European Adapter 40076 GB 9mm ( 1/4") 7m 40910 ––––– ––––– 40913 40914 40915 40916 40917 40918 40919 ––––– ––––– ––––– ––––– ––––– ––––– 12mm ( 3/8") 7m 45010 45011 45012 45013 45014 45015 45016 45017 45018 45019 45020 45021 45022 45023 45024 45025 19mm (1/2") 7m 45800 ––––– ––––– 45803 45804 45805 45806 45807 45808 45809 45810 45811 45812 45813 ––––– ––––– 24mm (1") 7m 53710 ––––– ––––– 53713 53714 53715 53716 53717 53718 53719 53720 53721 ––––– ––––– ––––– ––––– This product is CE marked in accordance with the EMC directive and the low voltage directive and is designed to conform with the following international standards: Safety – EN 60950, IEC 950, UL 1950 EMC emissions – EN 55022 Class B, CIS PR22 Class B, FCC pt15 Sub pt B Class B EMC immunity – EN50082-1, IEC801-2 & IEC801-3 Accessoires Cassettes ruban Dymo D1 Largeur: 6mm 9mm 12mm 19mm Longueur: 7m 7m 7m 7m Noir/Transparent 43610 40910 45010 45800 Bleu/Transparent ––––– ––––– 45011 ––––– Rouge/Transparent ––––– ––––– 45012 ––––– Noir/Blanc 43613 40913 45013 45803 Bleu/Blanc ––––– 40914 45014 45804 Rouge/Blanc ––––– 40915 45015 45805 Noir/Bleu ––––– 40916 45016 45806 Noir/Rouge ––––– 40917 45017 45807 Noir/Jaune 43618 40918 45018 45808 Noir/Vert ––––– 40919 45019 45809 Blanc/Transparent ––––– ––––– 45020 45810 Blanc/Noir ––––– ––––– 45021 45811 Noir/Argenté ––––– ––––– 45022 45812 Noir/Doré ––––– ––––– 45023 45813 Noir/Vert fluo ––––– ––––– 45024 ––––– Noir/Rouge fluo ––––– ––––– 45025 ––––– Adaptateur C.A. 40076 Cette machine porte le label CE en accord avec la directive EMC et la directive basse tension. Elle a été conçue en conformité avec les normes internationales suivantes : Sécurité : EN 60950, IEC 950, UL 1950 Emissions EMC : EN 55022 Classe B, CIS PR22 Classe B, FCC pt15 sub ptB Classe B Immunité EMC : EN 50082-1, IEC 801-2 & IEC 801-3 F 24mm 7m 53710 ––––– ––––– 53713 53714 53715 53716 53717 53718 53719 53720 53721 ––––– ––––– ––––– ––––– Toebehoren Tape-cassettes Breedte: 6mm Lengte: 7m Zwart/Transparant 43610 Blauw/Transparant ––––– Rood/Transparant ––––– Zwart/Wit 43613 Blauw/Wit ––––– Rood/Wit ––––– Zwart/Blauw ––––– Zwart/Rood ––––– Zwart/Geel 43618 Zwart/Groen ––––– Wit/Transparant ––––– Wit/Zwart ––––– Zwart/Zilver ––––– Zwart/Goud ––––– Zwart/Fluo groen ––––– Zwart/Fluo rood ––––– Wisselstroom adapter NL 9mm 7m 40910 ––––– ––––– 40913 40914 40915 40916 40917 40918 40919 ––––– ––––– ––––– ––––– ––––– ––––– 40076 12mm 7m 45010 45011 45012 45013 45014 45015 45016 45017 45018 45019 45020 45021 45022 45023 45024 45025 19mm 7m 45800 ––––– ––––– 45803 45804 45805 45806 45807 45808 45809 45810 45811 45812 45813 ––––– ––––– 24mm 7m 53710 ––––– ––––– 53713 53714 53715 53716 53717 53718 53719 53720 53721 ––––– ––––– ––––– ––––– Dit product heeft een CE keurmerk volgens EMC richtlijnen en de zwakstroom richtlijn en is ontworpen volgens de onderstaande internationale standaarden Veiligheid - EN 60950, IEC 950, UL 1950 EMC emissies - EN 55022 Klasse B, CIS PR 22 Klasse B, FCC pt 15, sub B, Klasse B EMC immuniteiten - EN50082-1, IEC 801-2 & IEC 801-3 Accessori Cartucce nastro Larghezza: Lunghezza : Nero/trasparente Blu/trasparente Rosso/trasparente Nero/bianco Blu/bianco Rosso/bianco Nero/blu Nero/rosso Nero/giallo Nero/verde Bianco/Trasparente Bianco/Nero Nero/Argento Nero/Oro Nero/Verde fluo Nero/Rosso fluo Adattatore I 6mm 7m 43610 ––––– ––––– 43613 ––––– ––––– ––––– ––––– 43618 ––––– ––––– ––––– ––––– ––––– ––––– ––––– 40076 9mm 7m 40910 ––––– ––––– 40913 40914 40915 40916 40917 40918 40919 ––––– ––––– ––––– ––––– ––––– ––––– 12mm 7m 45010 45011 45012 45013 45014 45015 45016 45017 45018 45019 45020 45021 45022 45023 45024 45025 19mm 7m 45800 ––––– ––––– 45803 45804 45805 45806 45807 45808 45809 45810 45811 45812 45813 ––––– ––––– CERTIFICATO DEL PRODUTTORE/IMPORTATORE Con il presente documento si certifica che l’etichettatrice DYMO è conforme alle disposizioni della Norma 1046 sulle interferenze elettriche. Alla Bundespost è stata notificata la messa in commercio dell’apparecchio ed è stata concessa l’autorizzazione alla verifica dell’effettiva conformità alle Norme. 87/308/EEC. 24mm 7m 53710 ––––– ––––– 53713 53714 53715 53716 53717 53718 53719 53720 53721 ––––– ––––– ––––– ––––– Accesorios Cintas Anchura: 6mm 9mm 12mm 19mm Longitud: 7m 7m 7m 7m Negro/transparente 43610 40910 45010 45800 Azul/transparente ––––– ––––– 45011 ––––– Rojo/transparente ––––– ––––– 45012 ––––– Negro/blanco 43613 40913 45013 45803 Azul/blanco ––––– 40914 45014 45804 Rojo/blanco ––––– 40915 45015 45805 Negro/azul ––––– 40916 45016 45806 Negro/rojo ––––– 40917 45017 45807 Negro/amarillo 43618 40918 45018 45808 Negro/verde ––––– 40919 45019 45809 Blanco/Transparente ––––– ––––– 45020 45810 Blanco / Negro ––––– ––––– 45021 45811 Negro / Plata ––––– ––––– 45022 45812 Negro / Oro ––––– ––––– 45023 45813 Negro / Verde Fluor ––––– ––––– 45024 ––––– Negro / Rojo Fluor ––––– ––––– 45025 ––––– Adaptador AC 40076 De acuerdo con la directiva EMC de la Comunidad Europea, y la directiva de bajo voltaje, este producto está diseñado para cumplir con los siguientes estandards internacionales: Seguridad EN 60950, IEC 950, UL 1959 Emisiones EMC - EN 55022 Clase B, CIS PR22 Clase B, FCC pt15 Sub pt B clase B. Inmunidad EMC - EN50082, IEC801-2 & IEC801-3 Acessórios Cassetes Largura: Comprimento: Preto/Transparente Azul/Transparente Vermelho/Transparente Preto/Branco Azul/Branco Vermelho/Branco Preto/Azul Preto/Vermelho Preto/Amarelo Preto/Verde Branco/Transparente Branco/Preto Preto/Prata Preto/Ouro Preto/Verde Fluor Preto/Vermelho Fluor Adaptador E 24mm 7m 53710 ––––– ––––– 53713 53714 53715 53716 53717 53718 53719 53720 53721 ––––– ––––– ––––– ––––– PT 6mm 7m 43610 ––––– ––––– 43613 ––––– ––––– ––––– ––––– 43618 ––––– ––––– ––––– ––––– ––––– ––––– ––––– 40076 9mm 7m 40910 ––––– ––––– 40913 40914 40915 40916 40917 40918 40919 ––––– ––––– ––––– ––––– ––––– ––––– 12mm 7m 45010 45011 45012 45013 45014 45015 45016 45017 45018 45019 45020 45021 45022 45023 45024 45025 19mm 7m 45800 ––––– ––––– 45803 45804 45805 45806 45807 45808 45809 45810 45811 45812 45813 ––––– ––––– 24mm 7m 53710 ––––– ––––– 53713 53714 53715 53716 53717 53718 53719 53720 53721 ––––– ––––– ––––– ––––– 6 Aksesuarlar Şerit Genişlik Uzunluk Siyah/Şeffaf Mavi/Şeffaf Kırmızı/Şeffaf Siyah/Beyaz Mavi/Beyaz Kırmızı/Beyaz Siyah/Mavi Siyah/Kırmızı Siyah/Sarı Siyah/Yeşil Beyaz/Şeffaf Beyaz/Siyah Siyah/Gümüş Siyah/Altın Siyah/Açık yeşil Siyah/Açık kırmızı AC Adaptör TR 6mm 7m 43610 ––––– ––––– 43613 ––––– ––––– ––––– ––––– 43618 ––––– ––––– ––––– ––––– ––––– ––––– ––––– 40076 9mm 7m 40910 ––––– ––––– 40913 40914 40915 40916 40917 40918 40919 ––––– ––––– ––––– ––––– ––––– ––––– 12mm 7m 45010 45011 45012 45013 45014 45015 45016 45017 45018 45019 45020 45021 45022 45023 45024 45025 19mm 7m 45800 ––––– ––––– 45803 45804 45805 45806 45807 45808 45809 45810 45811 45812 45813 ––––– ––––– 24mm 7m 53710 ––––– ––––– 53713 53714 53715 53716 53717 53718 53719 53720 53721 ––––– ––––– ––––– ––––– 7 © Esselte NV 2000 Introduction Creating your first label The Dymo LabelManager 300 enables you to create a wide variety of high quality self-adhesive labels of up to 90 characters. You will no doubt be anxious to see what your new LabelManager 300 can do. Before we go on to explore the many advanced features of the LM300, follow these simple steps to create your first label: The LabelManager uses 6mm (1/4"), 9mm ( 3/8"), 12mm (1/2"), 19mm (3/4") or 24mm (1") wide tape cassettes in a number of label colours. Labels are back slit for easy removal from the backing tape. Text can be printed horizontally or vertically in a variety of sizes and styles and can be left-justified, right-justified or centred on the label. GB 1. Fit the batteries, or connect the AC adaptor, plug in and switch on at the wall socket - see ‘Power Supply’. 2. Open the battery/cassette compartment cover and install a tape cassette – see page 2 and ‘Changing the Cassette’. Check that the cassette is fitted correctly. 3. Close the cover, then press to switch the power on. The welcome message ‘DYMO’ will appear, and then the display should look like this: Visit www.dymo.com for information on obtaining tapes and accessories for your LM300. Warranty Registration Please complete the warranty registration card and return it to the relevant address, within seven days– see the warranty booklet for details. 1 Cursor flashing Power Supply 4. Use the keyboard to type in your full name. Each character you enter will appear on the display, for example: BATTERIES • With the LabelManager positioned as shown in fig A➊ on page 2, open the machine by hinging down the keyboard. Apply pressure to point A➋ of the battery/ tape compartment cover to release the catch, then hinge down the cover. • Insert six size AA alkaline or re-chargeable Nickelcadmium batteries, observing the polarity markings A➌, and close the cover. • Remove batteries if the LabelManager is to be unused for some time. 1 DYMO • For an UPPER CASE character, press and hold down followed by the character required. • Press CAPS for all subsequent characters in UPPER CASE. • Press the space bar once for the space between each name. If you make a mistake, press DEL to delete the error, then type in the correction. 5. When you have finished, press . A label will be printed and will emerge from the slot in the top right hand side of the machine. Wait until the mechanism has stopped, then press the cutter lever E to cut off the label and remove it from the machine. You should now have a high quality printed name label — don’t waste it! If this is your personal machine, why not fix the label to the underside to identify its owner? You have just found the first of many uses for your DYMO labels. AC ADAPTOR (optional) • Connect the AC adaptor to socket B➊. Inserting the adaptor plug disconnects the supply from the batteries. • Unplug the AC adaptor from the LabelManager before disconnecting the mains power to the adaptor, otherwise all label memory settings may be lost (see also ON/OFF). PRINT Changing the cassette • Apply pressure to point A➋ of the battery/tape compartment cover to release the catch, then hinge down the cover. • Hold as shown, then lift cassette C➊ straight up and out. • Ensure tape and ribbon C➋ are taut across mouth of cassette and tape passes between guideposts before installing as shown. If necessary, turn spool C➌ clockwise to tighten ribbon. • Check that cassette switch D➊ is set for the cassette type – see page 2. A notch in the cassette will fit over the switch when it is set correctly. • Insert cassette with tape and ribbon positioned as shown between print head D➋ and pinch rollerD➌. • Push firmly D❹ until cassette clicks into place. Ensure tape and ribbon are positioned correctly. • Close the compartment cover. DYMO 3 CLEAR The Display Line indicator Italic Justify CLEAR TEXT Size CURSOR KEY • Press or to move the cursor along the text, one character at a time. • Press and hold to scan through the text. • Press + or to move the cursor to the beginning or end of the line of text. • When used in conjunction with certain function keys, use or to select options. • To insert characters into the text, use or to position the cursor under the character to the right of the insertion point, then type in the characters required. CAPS on Copies on Mirror on Shift on BIG font on Vertical text Barcode on The display shows: • Up to two rows of 15 characters, plus the cursor, at one time. • Function indicators – as shown above. • The display will flash if you press an incorrect key in a function sequence. • Press or to move the cursor to the start of the previous or next line of a multi-line label. + or to move the cursor to the • Press beginning or end of the label. Function keys ON/OFF PRINTING • Press Switches the power on and off. • Switches off automatically after two minutes if no keys are pressed. The last label created will be retained and displayed when next turned on. Any stored label and settings will be retained. Note: If the batteries are removed for more than a few seconds, all text and settings will be lost. PRINT PRINT to print the label. • Use cutter lever E to release the label – see page 2. • If the display shows ↕↕↕↕↕↕↕↕↕↕, the tape cassette installed in the machine is too narrow for the label to be printed; change the cassette to a wider tape. PREVIEW When power is restored, the display will show a flashing cursor (no text) and the settings will be full height standard width text with and all other settings off. CAPITALS Allows you to preview your label before printing it. • Press + PREVIEW CAPS and the entire text will scroll across the display. On labels with 2 or more lines, the message will be previewed as a single line message. CAPS • Press for all subsequent characters in UPPER CASE (CAPITALS), as confirmed by the CAPS indicator in the display. SPACE KEY • Press • Press again to cancel and return to lower case. to insert a space into the text. SHIFT KEY SYMBOLS + SYMBOLS • Press to select a symbol character – see SYMBOLS AND SPECIAL CHARACTERS and the symbols table on page 2. Dual action - either press and hold down or press and release to remain in “shift” position. Press again to return to normal state. • Use before pressing an alphabet key to produce an UPPER CASE (CAPS) character. • For dual-purpose keys, press first to produce the legend above the key. • Pressing while CAPS is set will give a lower case character. DELETE DEL • Press to clear all the current text and cancel any fixed length setting, but leave the text size and other settings unchanged. Also use to exit or clear certain function key operations. Background Outline Shadow Underline Box pattern ABCDEFGHIJKLMN 1 2 3 4 + TEXT SIZE SIZE • The display shows the current selection of text print size: Height DEL small • Press to delete the character to the left of the cursor, or to exit certain function key operations. medium large 4 Condensed Normal Extended • Large height is available on 19 and 24mm labels only. Medium height is available on all except 6mm labels. Small height is available on all labels. Square Box - = • Press Pointed Box - = Round Corners - = SIZE Underlined - to select the size menu: B Use to select the size symbol required, then press to confirm the selection. The "B" (BIG FONT) mode will produce highly visible labels using the entire print height. In “B” mode, all text will be printed as capitals (without accents). • To create a label in "B" mode use or to move the = Scroll Box - = 3-D Box - = or to move the cursor under the desired • When the or — indicator is displayed, press to cancel the Box/Underline option. BOX/UL LABEL LENGTH LTH The length is normally calculated automatically, according to the length of the text on the label. The label length function displays the last used fixed label length, eg: • Rotates the text through 90° so that the label is printed , as confirmed by the VERT indicator in the display. 10 v e r t i c a l l y 40mm 1 • Press DEL to exit the length function without changing the length, or: • Use or to increase (5000mm / 196.85 inches max.) or decrease the length in 1mm / 0.04 inch steps, or or to increase or decrease the length in 10mm / 0.4 inch steps. The minimum fixed label length is 45mm / 1.8 inches. • Press again to cancel and return to horizontal text. Note: Vertical text is not available on multi-line labels. MULTI-LINE PRINTING • Press to start the next line of text on a multi-line label, e.g. This is a two line label in the display will be printed as: • Press to fix the length for all subsequent labels, confirmed by the LTH SET indicator in the display. • Press LTH to cancel the fixed length and restore the automatic length. • If the fixed length is too short for the text, when you and the display will indicate 2 lines: 12 3 Labels can be created as follows: 19mm 6mm 1 line small text or 24mm 9mm Up to 2 lines DYMO option. Either press to select the option (confirmed by the or — indicator displayed), or DEL to exit . VERT This is a two line label = Crocodile Box - • Use cursor under "B" and press (BFONT lights in display). • When "B" is selected, all other options are not available. JUSTIFY JUST Labels are normally printed with the text left-justified. On multi-line labels, press JUST to select left-justified, rightjustified or centred text, as shown in the display. See also LABEL LENGTH. VERTICAL TEXT — Up to 4 lines small text press PRINT or + PREVIEW CAPS the display will show how much longer the label is than the fixed length, eg: small text 9mm 12mm 1 line medium text Up to 2 lines small text 12mm 1 line medium text 19mm or 24mm Up to 2 lines medium text 19mm or 24mm 1 line large text and it will not print. Either cancel the fixed length (see to increase the above), or press LTH twice and use length; the label is now long enough and can be printed. COPIES MULTIPLE COPIES COPIES • To use this facility press then STYLE to show the last number of copies set on the display, for example BOX/UL # = 03 • If no Box/Underline option has been selected, pressing BOX/UL STYLE • Your LabelManager can provide multiple copies within the range 1-99. The line indicator in the display will confirm the number of lines in the label. BOXED/UNDERLINED PRINTING + . Use or to increase or decrease the number of copies required, then press once will display the menu below: to confirm (COPIES indicator lights in the display). To print the desired quantity press . PRINT 5 • To cancel an existing multiple copies setting, press COPIES ABC + STYLE . Note: A row of 2 vertical dots will print between each label as a cutting guide. ABC 12 3 12 3 12 3 Text entered before pressing followed by BARCODE + • Key in your starting number as the right most digit on , will result in text above the barcode: JUSTIFY ..n . ABC then the display will the label. Press automatically move up a digit to the next number. PRINT 1, 2, 3 ABC123 123 A two-line label always has small size text when it is mixed with a barcode. INCREMENTAL NUMBERING Labels can be printed in increments of 1 automatically. 1, 2, 3 123 ABC 12 3 ..n . then to continue the sequence. Press • It is also possible to include automatic incremental numbering when printing multiple copies. • Key in your starting number, eg. LABEL 1A . PRINT Entering the text after pressing ABC COPIES • Next press then STYLE followed by until the desired number of copies are displayed, eg.10, or use or to move the cursor under the number digits and key in the number required. Press 1, 2, 3 at the end of a barcode will produce text below the barcode: 12 3 ABC Text can be underlined, eg: to confirm. DYMO LABELMANAGER . 123 ..n ABC Now press then . This will print ten labels LABEL 1A to LABEL 10A. While using fixed length setting, the LabelManager will stop printing when the label exceeds the fixed length. PRINT or DEF STYLE ABC 123 DEF 12 3 DYMO LABELMANAGER 12 3 STYLE • Press to display the style menu: BARCODE BARCODES + Z JUSTIFY Use or to select italic, outline, s h a d o w or mirrored text, then press to confirm. The STYLE indicator will light in the display. Barcodes can be printed on 19mm and 24mm wide labels only and can be either full height or mixed with text on one or two lines. To create a bar code: BARCODE • Press • Press + to display the barcode type previously selected. • Press DEL to cancel and return to the current label, or or to step through the barcode types • Use available: EAN-13, EAN-8, UPC-A, UPC-E, CODE-39 and CODE-128. STYLE again to cancel and return to normal text. JUSTIFY + PAGE BREAK You can divide your label into 'pages' or blocks of text, each with its own text size and style settings. The number of lines which can be created in each page will depend on the label width. • Press • Press to select the barcode type displayed. The barcode indicator will light in the display and the symbols and will appear at each end of the space allocated for barcode characters. • Enter the characters which will become the barcode, eg: 1234567. • Press + • Press + to insert a page break. PREVIEW CAPS to preview the label; each page break is identified by the symbol •||•. SAVE SAVE + SIZE You can save up to 10 labels in the memory. SAVE to return to the label. + SIZE to • To save your current label, press display the memory locations. If there are no labels saved, the display will show: Note that the barcode indicator will appear in the display whenever the cursor is positioned under barcode characters. BARCODE with the cursor under the first location. The boxes are full if they contain a label and the cursor will be under the last changed label, eg: + ; the barcode • To edit a barcode, press characters only will be displayed and the barcode indicator will light in the display. JUSTIFY BARCODE • Press or + JUSTIFY again to return to the label. Contents of lab On a single line label, a bar code can be mixed with text which is small, medium or large size: 6 Note that background text is always printed in BIG font, (regardless of the size selected for the original label) and the amount of background text printed is determined by the length of the foreground label. In this example, there are three saved labels, the cursor is under the one which was last changed and the contents of that label is displayed on the second line. PREVIEW + CAPS to preview the entire You can press contents of the label if required. • Use or to move the cursor under an empty • For background text, select ‘A’ . The display will show the saved labels locations: location, then press to save your label and return to the label, or DEL to exit and return to the label. Contents of lab • To delete the contents of a memory location, use or to move the cursor under the location, then CLEAR + DEL . press + RECALL • Press + Use or required. • Press to select the label required (the PATTERN indicator is lit in the display) and return to the current label which will be the foreground text. RECALL BOXES UL RECALL BOXES UL • Press to display the memory locations of saved labels - as shown in ‘SAVE’ above. PREVIEW You can press + CAPS to preview the entire contents of the label if required. • Press to select the label required, or and return to the current label. PRINT to print the label. LAST LABEL MEMORY • The unit will store the last label text and settings when turned off. Upon power-up, these will be restored and displayed. Removal of the batteries for more than a few seconds may cause this information to be lost. To recall a saved label, use or to move the cursor under each full location, until the label you require is displayed. DEL to move the cursor under the label location ALIGN ALIGNMENT + LTH ALIGN • If a fixed label length is set, each press of + LTH will align the image to the left, the centre or the right of the label, as shown in the display. to exit • To delete the contents of a memory location, use or to move the cursor under the location, then CLEAR + DEL . press EURO CONVERSION C C or + C The LabelManager can be set to convert a chosen C currency into C or out of + C Euros. When this is selected, the label is scanned from right to left for a valid number. The first occurence of a comma (,) or a full stop (.), reading from right to left, will be read as a decimal point. For example: PATTERN + PATTERN VERT Background patterns or text cannot be printed on 6mm wide labels, or with Mirror, Vertical or BIG text. • If a pattern is already in use (the PATTERN indicator is lit in the display), pressing + VERT will cancel the pattern. PATTERN + • Press PATTERN VERT • If set to convert between Euros and Belgian Francs C (see ‘Euro Set-up’ below), pressing + C will convert the number on the label into Belgian Francs and add the BF value to the end of the label: ‘Sale 10.00/’ becomes ‘Sale 10.00/BF403.40’ If the original number is at the end of the label, it will be replaced by the BF value: ‘Sale 10.00’ becomes ‘Sale BF403.40’ to display the pattern menu: bricks check weave woodgrain tint tartan text diamonds • Use or required. to move the cursor under the pattern • Pressing C will convert the number on the label into Euros and add the Euro value to the end of the label: ‘Sale 10.00/’ becomes ‘Sale 10.00/e0.24’ If the original number is at the end of the label, it will be replaced by the Euro value: ‘Sale 10.00’ becomes ‘Sale e0.24’ Note that values are rounded to the nearest one hundreth of a unit. • Press to select the pattern required (the PATTERN indicator will light in the display), or DEL to exit and return to the current label. A label previously saved in one of the ten memory locations can be used as background text on another label. For example, a label already saved containing the name DYMO can be printed in the background of a label with has LM300 as the foreground text: LM300 DYMO 7 EURO SET-UP To set the currency for conversion to Euros: + • Press and then PRINT CONTRAST — may be adjusted by pressing + C . The display BEF
 Press • Use BF40,3399 or to step through the currencies available: Austria: 13,7603 öS Belgium: BF 40,3399 Germany: DM 1,95583 Spain: 166,386 Pts Finland: 5,94573 mk France: 6,55957 Fr Ireland: £ 0.78756 Italy: L1936,27 Luxembourg: LF 40,3399 e1 = _ to display the . to select lighter or darker print. Cleaning • Clean the cutter blade regularly: Press and hold down cutter lever E to expose cutter blade F➊, then use a cotton bud and alcohol to clean both sides of the blade. Release cutter lever E. • Check and clean print head face F➋ regularly using a cotton bud and alcohol ONLY. to confirm the selection. Troubleshooting C No display • check machine is on • replace discharged batteries • check AC adaptor. No printing or poor text • replace discharged batteries • check tape cassette installed correctly • clean the print head • replace the tape cassette. Poor print quality with white ink • When using a White on Black or a White on Clear cassette, it may be necessary to use the darkest contrast setting in order to obtain good print quality. To change the contrast setting via the keyboard, read and follow the instructions as described in the paragraph “Print Contrast”. Tape jammed • lift out tape cassette carefully • remove/release jammed tape • DO NOT cut the ink ribbon – turn spool C➌ to tighten • cut off excess label tape • refit/replace the tape cassette. Poor cutter performance • clean the cutter blade regularly No response to print key • !!!!!!!!!!!!!!! in the display indicates a printer jam. Press any key to return to normal display. Open the cassette compartment and free the jam. • flashing in the display indicates discharged batteries. Press any key to return to normal display. Replace the batteries. No success? • Call the DYMO customer service hotline telephone number in your country – see the warranty booklet. Symbols and special characters INTERNATIONAL CHARACTERS To add a diacritical (accent) to create an international character, enter the character first, followed immediately by the diacritical, e.g. press E followed by / to get é. To add a diacritical to an existing character, use or to place the cursor under the character to the right of the character to be changed, then press the appropriate diacritical key. SYMBOLS SYMBOLS + • Press to show symbols and special characters, some of which are not available direct from the keyboard. The display will show the last used symbol character, for A1 example: with a line of symbols above it. Each letter selects a line of symbol characters, numbered 1 to 6, as shown in the table on page 2. DEL or PRINT • Press to confirm the setting. The contrast level will revert to the mid-setting when the LabelManager is turned off and on again. Note: This function enables you to adjust the print quality under extreme temperature conditions. + C , the • The next time that you press C or conversion will be between Euros and the chosen currency. The line showing e1 = _ is user-definable. You can enter a currency symbol and rate for your currency against the Euro, eg $US. Note that for currencies larger than the Euro, you must enter ‘0’ before the decimal point of the value. • Press followed by contrast symbols will show the previously selected currency and its conversion rate into Euros, eg: • Use SYMBOLS to cancel, or • Press a letter key ‘A’ to ‘Z’ until you find the line of symbols required. You can then press a number key ‘1’ to ‘6’ to select the symbol required. Alternatively, use or to step through the rows A to Z, then use or to move the cursor under the symbol required. Press to place the symbol in the label. 8