AEF.1,5X35

section 18 EN -VALIDÉE 14/09/04 11:39 Page 670 GENERAL TOOLING MICRO-TECHJ SCREWDRIVERS 1. EFFICIENT The screwdriver end is designed to provide an effective pressure area in each of the three micro-engineering screwdriver positions. This end also rotates to optimize the turning motion. 6 1 2, 3. POWERFUL AND ACCURATE The body comprises a gripping surface designed for optimum torque transmission with handling accuracy. The handle is shaped fingers naturally grip the specially handle for total tool control. 4.QUICK AND EASY TO USE The ribbed cone provides a maximum grip for fast pre-tightening. Blade clearance gives a clear view of the job in hand. 2 3 5. A LARGE CHOICE OF BLADES A selection of over 50 high-precision steel or ceramic fixed or replaceable blades. 6. EASY IDENTIFICATION Micro-tech tools are colour-coded by size for instant selection of the correct tool. 4 5 Finger tip grip area Watch makers grip area ▼ SMALL SCREWDRIVER • Screw-lock chuck. • Burnished blade. F AE.1,2X35 AE.1,5X35 AEP.000X35 AEP.00X35 7d mm 1,2 x 35 1,5 x 35 2,0 x 35 2,5 x 35 9 mm 117 117 117 117 j p p p p d8 mm 17 x 82 17 x 82 17 x 82 17 x 82 D g 11,5 11,5 11,5 11,5 ▼ MICRO-TECHJ SCREWDRIVERS FOR SLOTTED HEADS • Revolving end. • Chromed blade, burnished tip. F AEF.1,5X35 AEF.1,8X35 AEF.2X35 AEF.2X75 AEF.2,5X35 AEF.2,5X75 AEF.3X75 AEF.3,5X75 AEF.4X75 7d mm 1,5 x 35 1,8 x 35 2,0 x 35 2,0 x 75 2,5 x 35 2,5 x 75 3,0 x 75 3,5 x 75 4,0 x 75 670 - F05 9 mm 117 117 117 157 117 157 168 168 168 j p p p p p p p p p d8 mm 17 x 82 17 x 82 17 x 82 17 x 82 17 x 82 17 x 82 21 x 93 21 x 93 21 x 93 D g 12,1 13,2 13,5 14,5 13,3 14,5 21,2 24,7 26,4 On-line catalogue available on www.facom.com Full palm grip area