72-3097

TM True RMS Digital Clamp Meter Features •  •  •  •  •  •  3-5/6 digit, 6000 Counts LCD Display Manual & Auto Ranging 30mm Jaw Capacity Diode and Continuity Test NCV Detector Continuity Buzzer •  •  •  •  •  •  Data Hold MAX/MIN & Relative Mode Auto Power Off Low Battery Indication Input Protection Input Impedance for DCV: 10MΩ www.element14.com www.farnell.com www.newark.com www.cpc.co.uk TM Page 12/07/18 V1.1 TM True RMS Digital Clamp Meter General Characteristics Safety Rating Power LCD Size Colour Weight Dimension Standard Accessories : CAT II 1000V, CAT III 600V : AAA 1.5V Batteries × 3 : 38mm × 24mm : Orange and Grey : 280g : 220mm × 75mm × 40mm : Batteries, Test Lead & User Manual Electrical Specifications Parameters Range Best Accuracy AC Current 6A/60A/600A ±(2.5% +5 digits) AC Voltage 6V/60V/600V/750V ±(1.2% +5 digits) DC Voltage 600mV/6V/60V/600V/1000V ±(0.8% +1 digit) Resistance 600Ω/6KΩ/60KΩ/600KΩ/6MΩ/60MΩ ±(1% +2 digits) Capacitance 99.99nF/999.9nF/9.999μF/99.99μF/999.9μF/9.999mF/59.99mF ±(4% +5 digits) Jaw Capacity 30mm Auto Power Off Around 15 minutes Low Battery Indication < 3.6V Part Number Table Description Part Number True RMS Digital Clamp Meter, 30mm Jaw 72-3097 Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Tenma is the registered trademark of the Group. © Premier Farnell Limited 2016. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk TM Page 12/07/18 V1.1