72-2595

TM Digital Multimeters 72-2590 Features: •  •  •  •  •  •  •  •  •  30 Ranges in Function Selection 2000 Count Display Diode Test Continuity Buzzer Data Hold Over-Range Indication Overload Protection for Full Range Auto Power Off & Low Battery Indication Independent Capacitance Test Socket for Measuring Plug-in Capacitance •  Input Impedance for DC Voltage : 10MΩ 72-2595 www.element14.com www.farnell.com www.newark.com www.cpc.co.uk TM Page 13/04/18 V1.0 TM Digital Multimeters General Characteristics: •  •  •  •  •  •  Safety Rating Power LCD Size Colour Weight Dimension (H × W × L) : CAT III 600V : 9V Battery (6F22) : 63mm × 29mm : Orange & Grey : 300g : 186mm × 91mm × 39mm Electrical Specifications: Parameters 72-2590 72-2595 DC Voltage (V) 200mV/2V/20V/200V/600V ±(0.5% +1 digits) AC Voltage (V) 2V/20V/200V/600V ±(0.8% +3 digits) DC Current (A) 200µA/2mA/20mA/200mA/10A ±(0.8% +1 digits) 2mA/20mA/200mA/10A ±(0.8% +1 digits) AC Current (A) 200µA/2mA/200mA/10A ±(1% +3 digits) 20mA/200mA/10A ±(1% +3 digits) Resistance (Ω) 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ/200MΩ ±(1% +2 digits) 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ ±(1% +2 digits) Capacitance (F) 2μF/200μF ±(4% +3 digits) >50uF for reference only 2nF/20nF/200nF/2μF/100μF ±(4% +3 digits) Temperature (°C) - -40°C to 1000°C ±(1% +5 digits) - -40°F to 1832°C ±(1% +8 digits) 12V/9V/1.5V ±(2.5% +2 digits) - Temperature (°F) Battery Test Accessories: 72-2590 72-2595 Battery, Test Lead and Instruction Manual Battery, Test Lead, Point Contact Temperature Probe and Instruction Manual Part Number Table Description Part Number Digital Multimeter, Handheld 72-2590 Digital Multimeter, Handheld 72-2595 Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Tenma is the registered trademark of the Group. © Premier Farnell Limited 2016. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk TM Page 13/04/18 V1.0