72-9485

TM Digital Clamp Meter Features •  •  •  •  •  •  •  •  3-3/4 Digits, 4000 Counts Display LCD Backlight Auto & Manual Ranging 55mm Jaw Capacity True RMS AC Voltage Diode Test and Continuity Buzzer Data Hold Peak Max/Peak Min Modes •  •  •  •  •  •  •  Auto Power Off Low Battery Indication Overloading Display Analog Bar Graph Full Icon Display Input Impedance for DCV: 10MΩ 1m Drop Test www.element14.com www.farnell.com www.newark.com www.cpc.co.uk TM Page 01/08/18 V1.0 TM Digital Clamp Meter General Characteristics Safety Rating Power LCD Size Colour Weight Dimension Standard Accessories : CAT II 600V, CAT III 300V : 9V Batteries (6F22) : 47mm × 30mm : Orange and Grey : 533g : 285.3mm × 105mm × 44.5mm : Batteries, Test Leads, Tool Box & User Manual Electrical Specifications Parameters Range Best Accuracy AC Current 40A/1000A ±(2% +8 digits) DC Current 40A/1000A ±(1.5% +8 digits) AC Voltage 400mV/4V/40V/400V/600V ±(1.2% +5 digits) DC Voltage 400mV/4V/40V/400V/600V ±(0.8% +1 digit) Resistance 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ ±(1% +2 digits) Frequency 40MHz ±(1% +3 digits) Duty Cycle 0.1% ~ 99.9% Jaw Capacity 55mm Analogue Bar Graph 41 Segments Part Number Table Description Part Number Digital Clamp Meter, 55mm Jaw 72-9485 Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Tenma is the registered trademark of the Group. © Premier Farnell Limited 2016. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk TM Page 01/08/18 V1.0