72-8715

TM Bench Type Digital Multimeter Description The model is a manual range digital bench-type multimeter with average value display, full function and full range overload protection and a unique design. It can be powered by AC 220V/50Hz or 1.5V cell (R14) × 6. It’s your ideal testing meter with superior performance. It is widely used in industrial production and service, technological research and design, college education (laboratory, courses), and automotive industry. Features •  •  •  •  •  Display Count : 2,000 Manual Range Diode Test Transistor Test Continuity Buzzer •  •  •  •  •  Low Battery Indication Data Hold LCD Backlight Input Impedance for DCV : Around 10MΩ Misuse Alarm Specifications Range Best Accuracy DC Voltage (V) 200mV/2V/20V/200V/1000V ±(0.5%+2) AC Voltage (V) 2V/20V/200V/750V ±(0.8%+3) DC Current (A) 200μA/2mA/20mA/200mA/10A ±(0.8%+2) AC Current (A) 2mA/20mA/200mA/10A ±(1.0%+3) Resistance (Ω) 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ ±(0.8%+3) Capacitance (F) 20nF/2μF/200μF ±(4%+3) Frequency (Hz) 2kHz/200kHz ±(1.5%+5) Temperature (°C) -40°C to 1000°C ±(1.2%+3) General Characteristic Power AC 220V/50Hz or 1.5V Cell (R14) × 6 LCD Size 108mm × 34.5mm Product Colour Orange and Grey Product Net Weight 1650g Product Size 300mm × 245mm × 105mm Standard Accessories Test Lead, Alligator Clip, Point Contact Temperature Probe, Multi-Purpose Socket, Two Mains Adaptors (BS1363 pins, Euro pins) Safety Rating CAT II 1000V Part Number Table Description Part Number Bench Type Digital Multimeter 72-8715 Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Tenma is the registered trademark of the Group. © Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk www.mcmelectronics.com TM Page 14/01/16 V1.1