72-14415

TM Clamp Meter Features •  •  •  •  •  •  •  •  4000 Counts LCD Display AC Current Data Hold REL (Zero) Auto Power Off Low Battery Indication 1.2″ (30mm) Jaw opening NCV Detection Electrical Specifications Function AC Current (50/60Hz) Range and Resolution Accuracy (% of reading) 40.00A AC ±(2.5% + 8 digits) 400.0A AC ±(2.8% + 8 digits) 400.0mV DC ±(0.8% + 2 digits) 4.000V DC DC Voltage 40.00V DC ±(1.5% + 2 digits) 400.0V DC 600.0V DC ±(2% + 2 digits) 4.000V AC AC Voltage (50-400Hz) 40.00V AC ±(1.8% + 8 digits) 400.0V AC 600.0V AC ±(2.5% + 8 digits) 400.0Ω ±(1.0% + 4 digits) 4.000kΩ 40.00kΩ Resistance ±(1.5% + 2 digits) 400.0kΩ 4.000MΩ ±(2.5% + 3 digits) 40.00MΩ ±(3.5% + 5 digits) 40.00nF ±(4.0% reading + 20 digits) 400.0nF Capacitance 4.000µF ±(3% reading + 5 digits) 40.00µF Frequency Sensitivity: 15Vrms 100.0µF ±(4.0% reading + 10 digits) 10-10kHz ±(1.5% reading + 2 digits) www.element14.com www.farnell.com www.newark.com www.cpc.co.uk TM Page 10/07/18 V1.0 TM Clamp Meter Function Temp (type-K) Probe accuracy not included) Range and Resolution Accuracy (% of reading) -20°C to 760°C ±(3% reading + 5°C) -4°F to 1400°F ±(3% reading + 9°F) Part Number Table Description Part Number Clamp Meter, AC, 30mm Jaw 72-14415 Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Tenma is the registered trademark of the Group. © Premier Farnell Limited 2016. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk TM Page 10/07/18 V1.0