72-8225A

TM Dual Channel, 50MHz Digital Storage Oscilloscope Features •  •  •  •  •  •  •  •  Supports Plug-and-Play USB Interface to Communicate with PC Automatic Waveform and Status Setup Automatic Measurement of 28 Waveform Parameters Automatic Cursor Tracing and Measurement Function Unique Waveform Recording and Replay Function Multiple Mathematical Calculation Functions for Waveform Edge, Pulse and Alternate Trigger Functions Pass / Fail Detection www.element14.com www.farnell.com www.newark.com www.cpc.co.uk TM Page 13/04/18 V1.0 TM Dual Channel, 50MHz Digital Storage Oscilloscope Specifications Channels Bandwidth Sample Rate Rise Time Memory Depth Waveform Acquisition Rate Vertical Sensitivity Time-Based Range Storage Trigger Modes Interface :2 : 50MHz : 500MS/s : ≤ 7ns : 25kpts : ≥ 2000wfms/s : 1mV/div ~ 20V/div : 5ns/div ~ 50s/div : Setup, Wave, Bitmap : Edge Pulse, Alternate : USB OTG General Characteristics Safety Rating Power Display Product Colour Product Weight Product Size (W × H × D) : CAT II 300V : 100-240VAC, 50Hz/60Hz : 7 Inches TFT LCD, WVGA (400 x 240) : White & Grey : 2.2kg : 306mm × 134mm × 122mm Accessories Probe x 2 (1x, 10x Switchable), Power Cord, USB Cable, PC Software CD, Instruction Manual Part Number Table Description Part Number Digital Storage Oscilloscope, 2-Channel, 50MHz 72-8225A Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Tenma is the registered trademark of the Group. © Premier Farnell Limited 2016. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk TM Page 13/04/18 V1.0