76-1400

Straight 4mm Banana Plug to Plug Safety Patch Cord – 1.5m TM Specifications Voltage Rating Current Rating : CAT IV 1000V According to EN / IEC 61010-031 : 12A Materials Body Conductors : Polypropylene : Brass & Beryllium Copper, Nickel Coated Lead Wire Jacket Conductor Temperature : Silicone : 0.75mm2 : -60°C to +180°C 62.5mm 1.5m 4mm 4mm 7.8mm Diagram Part Number Table Description Straight 4mm Banana Plug to Plug Safety Patch Cord Length 1.5m Colour Part Number Red 76-016 Black 76-1400 Blue 76-1402 Green 76-1404 Yellow 76-1406 Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Tenma is the registered trademark of the Group. © Premier Farnell Limited 2016. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk TM Page 22/08/18 V1.1