ECF-10

SHF–110–01–L–D–RA F-218 ESHF–125–01–L–D–SM–LC EHF–108–01–F–D–SM–LC ESHF–105–01–L–D–SM EHF–125–01–L–D–SM–LC (1,27 (1.27 mm) .050" SHF, ESHF, EHF, ECF SERIES SHROUDED & EJECTOR IDC HEADER SHF, ESHF Mates with: FFSD, FFTP (SHF) TYPE STRIP EHF Mates with: FFSD*, FFTP NO. PINS PER ROW 1 SPECIFICATIONS = Mates with FFSD without Strain Relief Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Sn or Au over 50 µ" (1.27 µm) Ni Operating Temp Range: -55 °C to +125 °C RoHS Compliant: Yes PLATING OPTION TAIL STYLE D –RA (Standard sizes) ESHF (1.27) .050 TYP = Mates with FFSD with Strain Relief TYPE STRIP = Rightangle A No. of pins x 02 04 –LC = Locking Clip (Not available with –RA) (Manual placement required) = Throughhole = 10 µ" (0.25 µm) Gold on post, Matte Tin on tail A OTHER OPTION –TH –L 04, 05, 06, 08, 10, 11, 12, 13, 15, 17, 20, 25 SHF For complete specifications see www.samtec.com?SHF, www.samtec.com?ESHF or www.samtec.com?EHF 01 SHF (1.27) .050 + (6.35) .250 –SM –TR = Surface Mount = Tape & Reel Packaging No. of pins x ESHF (1.27) .050 + (10.16) .400 01 03 –RA –TH PROCESSING (5.33) .210 Lead–Free Solderable: Yes SMT Lead Coplanarity: (0.10 mm) .004" max (1.91) .075 (0.41) .016 SQ RECOGNITIONS = (6.50 mm) .256" DIA Polyimide Film Pick & Place Pad (–SM only) (1.27) .050 (5.46) .215 –TH –K (2.15) .085 –SM (5.85) .230 –SM –RA (1.27) .050 For complete scope of recognitions see www.samtec.com/quality EHF FILE NO. E111594 NO. PINS PER ROW 1 01 PLATING OPTION D TAIL OPTION OTHER OPTION ALSO AVAILABLE (MOQ Required) 04, 05, 08, 10, 13, 17, 20, 25 • Other sizes Contact Samtec. (Standard sizes) EJECTOR HEADER CAP –F = Gold flash on post, Matte Tin on tail (Locks FFSD cable to EHF header) (8.76) .345 Leave blank for ThroughHole version –SM = Surface Mount –L No. of positions x (1.27) .050 + (14.48) .570 02 = 10 µ" (0.25 µm) Gold on post, Matte Tin on tail –RA = Right-angle (9.65) .380 No. of positions x (1.27) .050 + (18.03) .710 ECF NO. PINS PER ROW (1.27) .050 Note: Some lengths, styles and options are non-standard, non-returnable. 01 –SM –RA (0.41) .016 SQ 05, 08, 10, 13, 17, 20, 25 *Important Note: EHF will not mate to FFSD with strain relief (-SR option), see ESHF series. (3.05) .120 (1.52) .060 –LC = Pick & Place Pad (–SM only) –TR (6.67) (2.29) .263 .090 –TH = Tape & Reel Packaging (–LC not available) (1.27) .050 –RA Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM = (7.50 mm) .295" DIA Polyimide Film Pick & Place Pad –P (7.52) .296 –SM (2.72) .107 (1.27) .050 –LC = Locking Clip (–SM only) (Manual placement required) –K (8.51) .335 –TH (11.30) .445 (8.26) .325 –“XX” = Polarized Position (–RA not available) All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.