EJH-108-01-L-D-TH

F-218 EJH–107–01–F–D–TH EJH–120–01–L–D–SM (2.54 mm) .100" EJH SERIES SHROUDED IDC EJECTOR HEADERS SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?EJH (2.54 mm) .100" pitch Mates with: IDSD (EJH-01 Required), HCSD (EJH-02 Required) Polarized Ejector mechanism Insulator Material: -01: Black LCP -02: Natural LCP Terminal Material: Phosphor Bronze Plating: Sn or Au over 50 µ" (1.27 µm) Ni Operating Temp Range: -55 °C to +125 °C RoHS Compliant: Yes Surface Mount, Right-angle or Through-hole PROCESSING Lead–Free Solderable: Yes SMT Lead Coplanarity: (0.10 mm) .004" max RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality EJH 1 NO. PINS PER ROW LEAD STYLE PLATING OPTION TAIL OPTION D OTHER OPTION FILE NO. E111594 05, 07, 08, 10, 13, 15, 17, 20, 25 ALSO AVAILABLE (MOQ Required) –01 = Gold flash on post, Matte Tin on tail = Surface Mount –02 –L = Through-hole = Extended (Mates to HCSD) = 10 µ" (0.25 µm) Gold on post, Matte Tin on tail (9.91) .390 –02 (2.3) .09 (2.59) .102 REF (2.54) .100 (2.54) .100 –RA OPTION (0.64) .025 SQ A –P = Pick & Place Pad (-SM only) –TR A (3.05) .120 Note: Some lengths, styles and options are non-standard, non-returnable. 01 –LC = Locking Clip (-SM only) (Manual placement required) = .475" (12.00 mm) DIA Polyimide Film Pick & Place Pad (-SM only) (6.35) .250 (0.51) .020 (16.88) .665 (17.39) .685 –RA =Right-angle (2.54) .100 02 –01 –TH –“XX” = Polarized Position –K –01= No. of positions x (2.54) .100 + (17.63) .694 –02= No. of positions x (2.54) .100 + (20.70) .815 No. of positions x (2.54) .100 + (2.64) .104 LEAD STYLE –SM = Standard (Mates to IDSD) (Standard sizes) • Other sizes • Other platings Contact Samtec. –F (5.72) .225 (12.70) .500 –LC OPTION (1.52) .060 (12.83) .505 (11.87) .467 –SM OPTION (Latch removed for clarity) Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. = Tape & Reel Packaging (-SM only) (25 position not available)