AFI-J-P-GF-ST-MT1

RF-13 (Rev 18MAR14) AFI–P–B–HG–ST–0914M AFI–P–P–GF–ST–EM2 AFI–J–P–GF–ST–MT1 AFI–J–P–GF–ST–SM1 AFI SERIES 50Ω AFI FLOATING JACK & ADAPTOR AFI-MT, AFI-SM, AFI-EM Mate with: AFI-B Bullet Adaptor Cable Mates: RF405 AFI GENDER SPECIFICATIONS PLATING –P = PCB Mount –J For complete specifications see www.samtec.com?AFI-MT, www.samtec.com?AFI-SM, www.samtec.com?AFI-EM or www.samtec.com?AFI-B Shell Material: Brass (-J), BeCu (-P) Contact Material: Brass (-J), BeCu (-P) Insulator Material: PTFE Impedance: 50Ω Connector Durability: 100 mating cycles Operating Temp Range: -65°C to +165°C AC Power: 200 W at 2 GHz, 70°C max RoHS Compliant: Yes TYPE = Jack –P = Plug (13,89) .547 ORIENTATION TERMINATION –GF –ST –MT1 = 10µ" (0,25 µm) Gold center contact, Gold flash on outer contact = Straight = Mixed Technology (–J only) (0,95) .037 SQ (1,55) .061 (6,03) .237 –SM1 = Surface Mount (–J only) (0,57) .022 (7,10) .280 DIA (5,08) (1,27) .050 .200 Processing: (1,57) .062 SQ (2,70) .106 –MT1 –SM1 APPLICATION (2,40) .094 (14,42) .568 (4,64) .183 –EM2 = Shrouded Edge Mount (–P only) (2,11) .083 DIA Lead–Free Solderable: Yes (0,97) .038 DIA (11,00) .433 DIA (7,62) .300 DIA Up to 1,00 mm (.040") axial misalignment –EM1 = Edge Mount (–P only) (1,68) .066 (20,16) .794 (19,06) .750 –EM2 –EM1 Up to 0,80 mm (.030") radial misalignment AFI Standard stack height 27,8 mm (1.094") to 28,8 mm (1.134") including 1,00 mm (.040") axial float. GENDER –P = Plug TYPE PLATING –B –HG = Bullet Adaptor = 30µ" (0,76 µm) Gold center contact, 10µ" (0,25 µm) Gold outer contact ALSO AVAILABLE (MOQ Required) • Additional plating options • Stamped shell bullet adaptor Contact Samtec. (5,33) .210 DIA (9,14) .360 (4,65) .183 DIA WWW.SAMTEC.COM ORIENTATION –ST = Straight 0914M